Question about intakes? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

2010-IOM-2SS/RS · 04-17-2010, 03:03 PM

I have a L99/A6, I was thinking about buying a intake. But the thing is, I want to run a Maggie when I get the money together. So I was wondering if there is any intakes that would work on my car now, that when I got the Maggie, I could still use the same intake. I really dont want to have to buy 2 intakes nor do I want to run the intake that comes with most of the maggies. Thanks for any help!!

Apex Motorsports · 04-17-2010, 03:31 PM

ADM Performance makes a version of its intakes for Camaros equipped with the Maggie as well. I don't know how different they are, but check with Andy over at ADM to see if you could get one of their N/A intakes now and pick up the necessary parts to convert it for the Maggie later. That is the only possibility I can think of.

ron10 · 04-17-2010, 03:48 PM

i was doing a little research and yes the s/c cai requires more air intake than the normal cai for the stock engine.

R1Ecko · 04-17-2010, 06:23 PM

On Andy's (ADM) site it definitely says you can use his intake for NA and forced applications. Not sure what is involved in the switch but give him a call.

PAAC3 · 04-17-2010, 06:42 PM

I believe that roto-fab makes a kit now if you have their intake and add a sc later. Consists of different tube and longer hoses. Not sure of cost but I am sure its no where near the cost of a new intake. I think they just had a post on it???

Roto-fab 1 · 04-18-2010, 10:46 PM

Although many have used our standard intake tube with a Maggie, we now offer a tube that not only lines up with the throttle body location on the Maggie, but also maintains a larger cross-section which is a beneficial for the additional air requirements of the S/C. Our intake is very popular with this application due to the great air flow and tuning characteristics.
We do offer the "upgrade kit" as a product which can be purchased later should you decide to go with the super charger. The kit inlcludes:
Inlet elbow
4 1/4" x 4" transition hump hose
straight connector for PCV hose (threads in inlet elbow)
silicone PCV hose (longer for S/C applications)

The upgrade kit is available for $89.95.

04-17-2010, 03:03 PM	#1
2010-IOM-2SS/RS Drives: 2010 Camaro 2SS/RS IOM Join Date: Apr 2010 Location: Tarboro, NC Posts: 3	Question about intakes? I have a L99/A6, I was thinking about buying a intake. But the thing is, I want to run a Maggie when I get the money together. So I was wondering if there is any intakes that would work on my car now, that when I got the Maggie, I could still use the same intake. I really dont want to have to buy 2 intakes nor do I want to run the intake that comes with most of the maggies. Thanks for any help!! __________________ 2010 Camaro 2SS/RS IOM w/Black Stripes Factory Body Kit, Tinted windows, all lights smoked!

04-17-2010, 03:31 PM	#2
Apex Motorsports Drives: 2000 Camaro SS Join Date: Feb 2010 Location: Louisville, Ky. Posts: 25,165	ADM Performance makes a version of its intakes for Camaros equipped with the Maggie as well. I don't know how different they are, but check with Andy over at ADM to see if you could get one of their N/A intakes now and pick up the necessary parts to convert it for the Maggie later. That is the only possibility I can think of. Last edited by Apex Motorsports; 04-17-2010 at 03:50 PM.

04-17-2010, 06:23 PM	#4
R1Ecko Drives: 2018 Camaro SS Join Date: Dec 2008 Location: The Colony TX Posts: 277 View My Garage	On Andy's (ADM) site it definitely says you can use his intake for NA and forced applications. Not sure what is involved in the switch but give him a call. __________________ 1SS Black 6 Speed Manual

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Group Buy - ADM Performance Cold Air Intakes @ Apex Motorsports	Apex Paul	V8 Bolt-Ons & Tunes	34	06-08-2010 09:09 PM
Injen Cold-Air Intakes ~ V6 Camaro, 16+ HP an Torque!	Circuit Motorsports	V6 Bolt-Ons & Tunes	48	04-22-2010 04:03 PM
Question Involving 4.10 gears & Bushings	Deric884	V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)	1	02-13-2010 07:53 AM
NEW PRODUCT! K&N Typhoon Cold Air Intakes!!!	MoranoRacing	V8 Bolt-Ons & Tunes	2	12-28-2009 12:39 PM
Question re: c.i. displacement and hp	Arli	5th Gen Camaro SS LS LT General Discussions	6	03-24-2009 02:20 PM

04-17-2010, 03:48 PM	#3
ron10 Drives: 2010 2SS IOM L99 Join Date: Jan 2010 Location: LOUISVILLE,KY.. Posts: 7,545	i was doing a little research and yes the s/c cai requires more air intake than the normal cai for the stock engine.

04-17-2010, 06:42 PM	#5
PAAC3 Drives: 2010 Camaro 2ss/rs Join Date: Jun 2009 Location: Upstate NY Posts: 17	I believe that roto-fab makes a kit now if you have their intake and add a sc later. Consists of different tube and longer hoses. Not sure of cost but I am sure its no where near the cost of a new intake. I think they just had a post on it???

04-18-2010, 10:46 PM	#6
Roto-fab 1 Drives: 16 Camaro SS w/ Roto-fab CAI Join Date: May 2009 Location: Arizona Posts: 2,682	Although many have used our standard intake tube with a Maggie, we now offer a tube that not only lines up with the throttle body location on the Maggie, but also maintains a larger cross-section which is a beneficial for the additional air requirements of the S/C. Our intake is very popular with this application due to the great air flow and tuning characteristics. We do offer the "upgrade kit" as a product which can be purchased later should you decide to go with the super charger. The kit inlcludes: Inlet elbow 4 1/4" x 4" transition hump hose straight connector for PCV hose (threads in inlet elbow) silicone PCV hose (longer for S/C applications) The upgrade kit is available for $89.95.