04-20-2010, 01:05 PM | #1 |
I put the FU back in FUN
Drives: 1969 SS 396 , 2010 Camaro SS Join Date: Jun 2009
Location: Between Weatherford and Azle TX hway730
Posts: 2,129
|
Add Oil or Not in my L99 ?
I'm about to go up in the Mountains and winding Roads of Arkansas ( Eureka Springs ) this coming Thursday-Monday . I have 2 other cars both Vettes that will be going and we will be doing some good old fashion backroads driving !!!!!!!!
One of my friends has a LS6 in his Vette. He told me I needed to get on here and ask the folks more knowledgeable with LS3's/L99's a question. He said LS1's and LS6's are known in large curves/turns for the oil to move from side to side therefore at times the car isnt getting oil he said people have been said to add half a quart of oil to there cars to prevent this I'm wondering if I need to do the same. Right now my car has 1,691 miles on the odometer all break in miles on the original oil ( I have a oil filter magnet on the filter to catch trash and seperate it from the oil ) when I return it will be going in to the dealership within the next week to have the Oil changed for the first time. Do I need to have any concern about adding oil to my car so the oil doesnt do what he is speaking of doing ? I dont know if LS3/L99's are in the same boat as LS1's and LS3's Thanks David |
04-20-2010, 01:23 PM | #2 | |
Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,230
|
Quote:
Ted.
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com |
|
04-20-2010, 01:25 PM | #3 |
12.23s@113mph
Drives: 2SS/RS, A6, just a few bolt ons Join Date: Jul 2009
Location: Houston, TX
Posts: 1,197
|
the oil pans in these cars are much bigger also with baffles inside to control oil sloshing around. i don't think your going to have a problem
__________________
RIP Cammie 7/15/2009 - 4/1/2011 |
04-20-2010, 01:35 PM | #4 |
Drives: '15 SS 1LE, '69 Z28 drag car Join Date: Dec 2009
Location: Mich
Posts: 4,482
|
I had an LS6 Z06 and I always kept it 1/2 qt over or so for hard cornering.
But completely different animal. Those cars can do a G cornering, a Camaro will come no where near that without serious modifications. Plus, the LS6 held a bit less oil, 6 qts if I remember. Short answer is no. |
04-20-2010, 01:52 PM | #5 |
Drives: 2016 Mazda6, 2011 Mustang 5.0 Join Date: Mar 2010
Location: Portage, Wisconsin
Posts: 4,049
|
As long as the car is stock, you're fine. There are already 9 quarts in there, and I'm sure GM was smart enough not to build an engine that gets oil starved in corners (since they don't like replacing engines under warranty). Besides, overfilling a crankcase with oil can be as bad as underfilling it.
__________________
2022 1SS 1LE (Arrived 4/29/22)
"The car is the closest thing we will ever create to something that is alive." . 2022 1SS 1LE (Coming Soon) |
04-20-2010, 03:36 PM | #6 |
I put the FU back in FUN
Drives: 1969 SS 396 , 2010 Camaro SS Join Date: Jun 2009
Location: Between Weatherford and Azle TX hway730
Posts: 2,129
|
Thanks everyone I just wanted to besure rather than screw something up
|
04-22-2010, 02:48 AM | #7 |
Pat @ ADM PERFORMANCE
Drives: CGM SS/RS M6 Join Date: Aug 2009
Location: Prosper, TX
Posts: 506
|
David,
Just as all have said we are LIGHT YEARS ahead of where the LSx series engines started out. Go enjoy your car and we look forwards to working with you with your new baby! Pat
__________________
"old age and treachery will always overcome youth and ambition" author unknown "There are two types of racers: cheaters...and losers." Smokey Yunick |
04-22-2010, 07:00 AM | #8 |
Drives: 2010 Camaro 2SS/RS Join Date: Mar 2010
Location: Houston, TX
Posts: 487
|
Most importantly... HAVE A FREAKING GREAT TIME!!!!!!!!! I would love to be there with ya'll!!
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Official 1/4 Mile (V8) 2010+ Camaro Fast List | Merc | Dragstrip and Launch Techniques Discussion | 3652 | 08-17-2023 02:50 PM |
Oil Change Ramp | mjlash22 | Mechanical Maintenance: Break-in / Oil & Fluids / Servicing | 17 | 01-21-2010 10:40 PM |
synthetic motor oil? | bigd1276 | Mechanical Maintenance: Break-in / Oil & Fluids / Servicing | 71 | 01-29-2009 12:28 PM |
L99 engine specifications | Tran | Wiki | 0 | 10-19-2008 11:40 AM |
Major U.S. oil source is tapped | KILLER74Z28 | Off-topic Discussions | 32 | 10-30-2007 09:47 AM |