Flowmaster American Thunder kit installed - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

FirstCamaro2k10 · 04-27-2010, 09:32 PM

Ordered mine from amazon.com, they where having 30 percent off, got it for 321.99 shipped. Not expected to ship though until like May 18th-25th. But for the price, i can wait.

cajun2010 · 04-30-2010, 11:49 PM

just got my Eibachs installed today, and i had somebody drive my car around the block. I LOVE the sound it makes, even with the resonated xpipe!! Thank you Flowmaster and Magnaflow HAHA

boomskeet · 05-11-2010, 03:42 AM

should i weld mine on? or just clamp it on?....what the difference? are they both reversible? do they sound the same? anything else?

AlSuwaidi · 05-11-2010, 03:48 AM

looking good!

Camaro Freak · 05-11-2010, 04:59 PM

Quote:

Originally Posted by boomskeet

should i weld mine on? or just clamp it on?....what the difference? are they both reversible? do they sound the same? anything else?

I had mine welded on at a muffler shop for $75.00. Heard from several guys that they clamps came loose over time and had to keep tightening them. If there welded they don't come loose.Also the sound is really bad-assed. Not loud at all, unless you get down on it and then its a deep growl. I didn't install the x-pipe cause as I stated before, its not needed with this system. No drone at all.

boomskeet · 05-11-2010, 07:16 PM

Quote:

Originally Posted by Camaro Freak

I had mine welded on at a muffler shop for $75.00. Heard from several guys that they clamps came loose over time and had to keep tightening them. If there welded they don't come loose.Also the sound is really bad-assed. Not loud at all, unless you get down on it and then its a deep growl. I didn't install the x-pipe cause as I stated before, its not needed with this system. No drone at all.

nice, do you know if you could remove the exhaust again to put on you old ones?

2010 SSRS · 05-11-2010, 08:08 PM

looks awesome

Camaro Freak · 05-11-2010, 08:56 PM

Quote:

Originally Posted by boomskeet

nice, do you know if you could remove the exhaust again to put on you old ones?

Sure, you would just have to cut the weld. But why would you ever want to?? I told the muffler shop to trash those big cans from the old one.

gameovergt · 05-12-2010, 06:17 AM

sweet

Agent Atomic Orange · 05-13-2010, 01:56 PM

This set up can be had for $430 at Auto Anything (using coupon code KEEP30). Shipping is free as well. I about ready to pull the trigger on this kit. I have been on the fence for a couple of months. Any videos out there of this set up without the flow-master x pipe?

Agent Atomic Orange · 05-13-2010, 02:01 PM

Quote:

Originally Posted by FirstCamaro2k10

Ordered mine from amazon.com, they where having 30 percent off, got it for 321.99 shipped. Not expected to ship though until like May 18th-25th. But for the price, i can wait.

Are you sure about this price? Their site lists this on sale for $459. If that is not a typo, you got a screaming deal.

01pewterz28 · 05-13-2010, 02:03 PM

Love my flowmaster but I think I am going to change the exhaust tips to look more factory I think I am going to order these.

Sean

Rwarchol · 05-13-2010, 02:33 PM

Quote:

Originally Posted by Agent Atomic Orange

Are you sure about this price? Their site lists this on sale for $459. If that is not a typo, you got a screaming deal.

They ran a coupon code at the beginning of the month. I got the same deal. Wasn't expected to ship til the end of May and I get an email from Amazon yesterday saying it was in early and should ship today. (got the ship confirmation this morning). Dear Amazon, why did you have to get me all jittery and anxious when I could've just been surprised?

FirstCamaro2k10 · 05-13-2010, 08:12 PM

I just ordered the kit from autoanything for 415 and some change, they had it in stock, i cant wait to get it!!

05-11-2010, 08:08 PM	#21
2010 SSRS Drives: 3 V8 Camaros Join Date: May 2009 Location: The Ocean State Posts: 111,186 View My Garage	looks awesome __________________ Jannetty Racing JRE Street Package

05-12-2010, 06:17 AM	#23
gameovergt G@M30v3RgT Drives: 2016 Mustang GT 5.0 DIB Join Date: Apr 2010 Location: Jacksonville Posts: 213	sweet __________________ 2016 Ford Mustang Base 5.0 GT DIBM/Black Accent Package(AUTO) (STOCK).

05-13-2010, 01:56 PM	#24
Agent Atomic Orange Drives: 2010 Camaro LS IOM M6 Join Date: May 2009 Location: Acworth, GA Posts: 258 View My Garage	This set up can be had for $430 at Auto Anything (using coupon code KEEP30). Shipping is free as well. I about ready to pull the trigger on this kit. I have been on the fence for a couple of months. Any videos out there of this set up without the flow-master x pipe? __________________ _____________________________________________ Airaid CAI (V2 Tube)/ Flowmaster American Thunder/ Barton Shifter Kit/ Hotchkis Sport Sway Bars/ Hotchkis Sport Springs/ AAC Lights/ GM Trim Kit/ Tint/ Pioneer Premier Champion Series Sub/ Pioneer 1500 Watt Amp

05-13-2010, 02:03 PM	#26
01pewterz28 #TeamBeckyD Drives: 2017 HBM 2SS Convertible A8 Join Date: Aug 2008 Location: Apopka, FL Posts: 10,494 View My Garage	Love my flowmaster but I think I am going to change the exhaust tips to look more factory I think I am going to order these. Sean Attached Images __________________ #TeamBeckyD FIFTY HBM 2SS VERT

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Flowmaster Exaust "H pipe back" dealer installed - Videos	itsadryheat79	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	14	09-08-2009 10:03 PM
Interesting read on American cars and trucks......	fbodfather	General Automotive + Other Cars Discussion	8	12-22-2006 09:47 PM

04-27-2010, 09:32 PM	#15
FirstCamaro2k10 Drives: 2010 Silver Ice Metallic Camaro LS Join Date: Feb 2010 Location: Just North of Beaumont, TX Posts: 731 View My Garage	Ordered mine from amazon.com, they where having 30 percent off, got it for 321.99 shipped. Not expected to ship though until like May 18th-25th. But for the price, i can wait.

04-30-2010, 11:49 PM	#16
cajun2010 Drives: 2010 1LT/RS Join Date: Nov 2009 Location: Youngsville, LA Posts: 923	just got my Eibachs installed today, and i had somebody drive my car around the block. I LOVE the sound it makes, even with the resonated xpipe!! Thank you Flowmaster and Magnaflow HAHA

05-11-2010, 03:42 AM	#17
boomskeet Drives: 2010 Camaro 1LT - Cyber Gray Join Date: Mar 2010 Location: Los Angeles Posts: 216	should i weld mine on? or just clamp it on?....what the difference? are they both reversible? do they sound the same? anything else?

05-11-2010, 03:48 AM	#18
AlSuwaidi Drives: BLACK LS3 GCC-Spec Join Date: Oct 2009 Location: UAE - SHARJAH Posts: 2,824 View My Garage	looking good!

05-13-2010, 08:12 PM	#28
FirstCamaro2k10 Drives: 2010 Silver Ice Metallic Camaro LS Join Date: Feb 2010 Location: Just North of Beaumont, TX Posts: 731 View My Garage	I just ordered the kit from autoanything for 415 and some change, they had it in stock, i cant wait to get it!!