custom intake manifold - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

John VS · 06-10-2010, 01:21 PM

Quote:

I just wish someone would make naturally aspirated performance intake manifold for the V6.

Yes please. One that doesn't cost more than about $600.

NXC1978 · 06-10-2010, 02:19 PM

Quote:

Originally Posted by John VS

One that doesn't cost more than about $600.

Right, other than the Aussie one. I searched and searched hoping to at least find one for a Cadillac that would work on our cars, but I couldn't find anything.

rhd · 06-10-2010, 03:04 PM

rmstexas.com said they could fab one up if you really wanted one

NXC1978 · 06-10-2010, 03:15 PM

did they give you any kind of estimate as far as price?

rhd · 06-10-2010, 04:13 PM

ya but he is a friend of mine so my price isnt the same as yours, but i did tell him the other guy wanted 2500 and he said it wouldnt be even close just give him a call tell him john sent you and see what he says

rhd · 06-10-2010, 04:17 PM

Revolution Motor Sports
3619 Graves Blvd Ste. C1
Pantego, TX 76013
817-277-9739
his name is Alex

devildoc · 06-10-2010, 04:27 PM

If I was going to go this route I would expect it to be the same price as the aussie one. I'll pay the shipping and handling from overseas but the closest price maybe to this is that of BMWDON's port/polish.

NXC1978 · 06-10-2010, 04:47 PM

I'd really like to have one made, but then I got thinking about what if I had engine trouble while under warranty... The first thing the dealership would do is pop open the hood and blame the fabed up intake for anything and everything that was going on with my car I'd imagine.

So, I guess I'll just wait. I'm sure that if I popped it open and they saw a cast intake that read "Edelbrock" or whatever, then they'd be a lot less likely to play the blame game. Sucks...

devildoc · 06-10-2010, 04:57 PM

Then get the Edelbrock sticker and put it on it.....haha. I completely understand what you are saying. I'm thinking I'm going to wait til 36k miles are up to do anything to major to the engine. By that time, FI and manifolds should be pretty prevelant I would hope.

rhd · 06-10-2010, 05:37 PM

how much is the ause one?......and how much do you think shipping would be they arnt light! lol

John VS · 06-10-2010, 06:41 PM

Aussie one is $1500 USD, problem is it's for the LY7 not the LLT. At least that's what I seem to remember from when I looked at it a couple months back. So on top of being wildly overpriced, it won't fit.

Nice LS3 performance intake is $1K. We should be able to get one for the 6 for less.

NXC1978 · 06-11-2010, 08:45 AM

Yep, I wouldn't spend that kind of coin on an intake anyway. Heck, I could have gears installed for that!

KMPrenger · 06-11-2010, 12:18 PM

Quote:

Originally Posted by NXC1978

Yep, I wouldn't spend that kind of coin on an intake anyway. Heck, I could have gears installed for that!

lol...which I'm thinking is probably the best "simple' mod out there (well...if it was available)

NXC1978 · 06-11-2010, 12:24 PM

Quote:

Originally Posted by KMPrenger

well...if it was available

I thought it was available for V6 with manual trans? Doesn't Richmond make a set?

06-10-2010, 04:27 PM	#35
devildoc Drives: '12 Toyota Tacoma Dbl Join Date: Sep 2009 Location: Beaufort, SC Posts: 1,275 View My Garage	If I was going to go this route I would expect it to be the same price as the aussie one. I'll pay the shipping and handling from overseas but the closest price maybe to this is that of BMWDON's port/polish. __________________ MRT V2\|Trifecta Tune\|Airaid\|ARH LTs\|Eibach Sways STANDING 1/4MI: 13.948@99.87 6600RPM HP/TQ Gains - 30.54HP/24.3TQ (NOT PEAK)

06-10-2010, 04:57 PM	#37
devildoc Drives: '12 Toyota Tacoma Dbl Join Date: Sep 2009 Location: Beaufort, SC Posts: 1,275 View My Garage	Then get the Edelbrock sticker and put it on it.....haha. I completely understand what you are saying. I'm thinking I'm going to wait til 36k miles are up to do anything to major to the engine. By that time, FI and manifolds should be pretty prevelant I would hope. __________________ MRT V2\|Trifecta Tune\|Airaid\|ARH LTs\|Eibach Sways STANDING 1/4MI: 13.948@99.87 6600RPM HP/TQ Gains - 30.54HP/24.3TQ (NOT PEAK)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
stock ls3 intake manifold great condition	X-treme Horsepower	V8 - Engine, Exhaust, Bolt-Ons, Tuning Equipment	2	04-28-2010 02:33 PM
LS3 Intake Manifold.....removed at 1000 miles.	Z71456	V8 - Engine, Exhaust, Bolt-Ons, Tuning Equipment	1	02-04-2010 11:10 PM

06-10-2010, 03:04 PM	#31
rhd dirtbag Drives: 2010 camaro LS Join Date: Mar 2010 Location: Addison TX Posts: 1,037	rmstexas.com said they could fab one up if you really wanted one

06-10-2010, 03:15 PM	#32
NXC1978 Drives: 1LT/RS Join Date: Mar 2010 Location: N. Dallas Posts: 178	did they give you any kind of estimate as far as price?

06-10-2010, 04:13 PM	#33
rhd dirtbag Drives: 2010 camaro LS Join Date: Mar 2010 Location: Addison TX Posts: 1,037	ya but he is a friend of mine so my price isnt the same as yours, but i did tell him the other guy wanted 2500 and he said it wouldnt be even close just give him a call tell him john sent you and see what he says

06-10-2010, 04:17 PM	#34
rhd dirtbag Drives: 2010 camaro LS Join Date: Mar 2010 Location: Addison TX Posts: 1,037	Revolution Motor Sports 3619 Graves Blvd Ste. C1 Pantego, TX 76013 817-277-9739 his name is Alex

06-10-2010, 04:47 PM	#36
NXC1978 Drives: 1LT/RS Join Date: Mar 2010 Location: N. Dallas Posts: 178	I'd really like to have one made, but then I got thinking about what if I had engine trouble while under warranty... The first thing the dealership would do is pop open the hood and blame the fabed up intake for anything and everything that was going on with my car I'd imagine. So, I guess I'll just wait. I'm sure that if I popped it open and they saw a cast intake that read "Edelbrock" or whatever, then they'd be a lot less likely to play the blame game. Sucks...

06-10-2010, 05:37 PM	#38
rhd dirtbag Drives: 2010 camaro LS Join Date: Mar 2010 Location: Addison TX Posts: 1,037	how much is the ause one?......and how much do you think shipping would be they arnt light! lol

06-10-2010, 06:41 PM	#39
John VS Drives: 2010 Camaro 2LT CGM, IOM Int. Join Date: Mar 2009 Location: Orange County, CA Posts: 381	Aussie one is $1500 USD, problem is it's for the LY7 not the LLT. At least that's what I seem to remember from when I looked at it a couple months back. So on top of being wildly overpriced, it won't fit. Nice LS3 performance intake is $1K. We should be able to get one for the 6 for less.

06-11-2010, 08:45 AM	#40
NXC1978 Drives: 1LT/RS Join Date: Mar 2010 Location: N. Dallas Posts: 178	Yep, I wouldn't spend that kind of coin on an intake anyway. Heck, I could have gears installed for that!