Utah Utes? - Page 247 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

slick1ru · 06-14-2010, 10:47 AM

MHB - Holy freaking BLING! The only thing that is missing is the white gleam they use in the teeth whitening commercials. What do you think? If I took a week off of work to get that done?

MHB · 06-14-2010, 11:35 AM

Slick,
So I bumped into someone that pointed out the swirl marks in my car one day and then i have been obsessed with getting rid of them ever sence. So dont look at the sun reflection on your car or your going to start obsessing like I did. Your more then welcome to come up and use my products or take them with you and do it over a weekend. The process took me 8 hours start to finish. I started with the two bucket wash, did a clay bar, then used swirl and hase remover, then a polish, and then sealer. so its basicaly like washing it then waxing it three times.
Later
MHB

lightning · 06-14-2010, 12:37 PM

Quote:

Originally Posted by slick1ru

Nah Lightning, they've got nothing on you. Thanks for reminding me of some fun stuff I haven't shared with the kids yet. I had them watch Victor Borge not too long ago. Great fun!

Yeah, you're right slick... I'm not as good lookin as Tim or Barney. I'm the guy that has to wear a Halloween costume to keep from scaring the kiddies when they come trick or treating!

slick1ru · 06-14-2010, 04:55 PM

Quote:

Originally Posted by lightning

Yeah, you're right slick... I'm not as good lookin as Tim or Barney. I'm the guy that has to wear a Halloween costume to keep from scaring the kiddies when they come trick or treating!

That is NOT what I said! Let me be more clear and put this in SSOOCH's language: "Nah, you're way too sexy to compare yourself to them." Additionally, they do not drive a car named Lightning.

lightning · 06-14-2010, 05:03 PM

Quote:

Originally Posted by slick1ru

That is NOT what I said! Let me be more clear and put this in SSOOCH's language: "Nah, you're way too sexy to compare yourself to them." Additionally, they do not drive a car named Lightning.

jonnyb · 06-15-2010, 05:51 PM

Quote:

Originally Posted by Slowkray

i got the American Racing Headers long system (high flo cats and x pipe). I have Borla type S axle back exhaust. This thing sounds mean. Love it.

Sorry I missed meeting you all. Sounds like you had a good day. I am looking forward to the next get together.

Sounds cool, later this month I am selling a project truck and I am all really looking at the ARH system with cam, tune and CAI. I was worried about the inside drone that all my other camaros have had but this thread really sold me on it.

http://www.camaro5.com/forums/showthread.php?t=71192

JDP Motorsports · 06-15-2010, 06:34 PM

Quote:

Originally Posted by jonnyb

Sounds cool, later this month I am selling a project truck and I am all really looking at the ARH system with cam, tune and CAI. I was worried about the inside drone that all my other camaros have had but this thread really sold me on it.

http://www.camaro5.com/forums/showthread.php?t=71192

Nice! The ARH system is very nice! When you're ready let me know and I'll get you some pricing so you have a comparison!

Jordan Priestley

JDP Motorsports · 06-16-2010, 04:25 PM

Here are some spy shoots of Darth V8R's new KOOKS Custom Headers with the black ceramic coating!!! These are SICK!!!

And Rouge SS......

Jordan

Slowkray · 06-16-2010, 04:45 PM

Quote:

Originally Posted by jonnyb

Sounds cool, later this month I am selling a project truck and I am all really looking at the ARH system with cam, tune and CAI. I was worried about the inside drone that all my other camaros have had but this thread really sold me on it.

http://www.camaro5.com/forums/showthread.php?t=71192

Jonnyb, the sound in the videos do not do it justice. If you hear this in person it is totally different. As far as the drone, I have some at low RPM, it may be the Borla's. I did not have it too bad until I put the header system on. I would highly recommend the ARH system. The instructions have a bit to be desired, but it is easy to figure out. The torque comes on alot sooner and it is very noticeable. 3 friends commented on it without it being the subject of conversation.

I looked into dyno tuning. API in Sandy quoted me $495.00. I am wondering if anyone knows a good shop that may do it cheaper or is this the standard rate? I need a CAI before I do this but am very interested. Man these cars are addicting.

JDP Motorsports · 06-16-2010, 05:53 PM

Hi Everyone!

It looks like we'll be having our Open House and summer kick off BBQ on July 3rd from 10am to 2pm with a cruise to follow through American Fork Canyon. I started a thread HERE, if anyone is interested jump in!!!!

Kind regards,

Jordan Priestley
888.308.6007

JDP Motorsports · 06-16-2010, 06:00 PM

Quote:

Originally Posted by Slowkray

Jonnyb, the sound in the videos do not do it justice. If you hear this in person it is totally different. As far as the drone, I have some at low RPM, it may be the Borla's. I did not have it too bad until I put the header system on. I would highly recommend the ARH system. The instructions have a bit to be desired, but it is easy to figure out. The torque comes on alot sooner and it is very noticeable. 3 friends commented on it without it being the subject of conversation.

I looked into dyno tuning. API in Sandy quoted me $495.00. I am wondering if anyone knows a good shop that may do it cheaper or is this the standard rate? I need a CAI before I do this but am very interested. Man these cars are addicting.

There is a much better dyno up North, I believe it is in Layton. I know Matt M. uses it quite a bit, he may chime in. I'm just not a fan of Mustang Dyno's which is what API uses.... I'll get there info and PM it to you. A much cheaper and more realistic dyno is at RMR, its cheap to during Test and Tune. Are you data logging or looking for a tune?

Kind regards,

Jordan Priestley

RogueSS · 06-16-2010, 06:06 PM

Sweet....parts!

I'm excited for Friday, wish I didn't have training tomorrow so I could have done it then!

Slowkray · 06-16-2010, 07:39 PM

Quote:

Originally Posted by JDP Motorsports

There is a much better dyno up North, I believe it is in Layton. I know Matt M. uses it quite a bit, he may chime in. I'm just not a fan of Mustang Dyno's which is what API uses.... I'll get there info and PM it to you. A much cheaper and more realistic dyno is at RMR, its cheap to during Test and Tune. Are you data logging or looking for a tune?

Kind regards,

Jordan Priestley

Full Tune, not data logging. Thanks, appreciate it.

Darth V8R · 06-16-2010, 08:25 PM

Quote:

Originally Posted by JDP Motorsports

Here are some spy shoots of Darth V8R's new KOOKS Custom Headers with the black ceramic coating!!! These are SICK!!!

OOOH sexy!

You need to warn me before you post pictures like that, I almost made a big mess...

06-16-2010, 05:53 PM	#3454
JDP Motorsports Drives: 2011 Camaro SS/ 2016 Camaro SS Join Date: Jun 2009 Location: Sandy, Utah Posts: 3,256	JDP Motorsports Open House and BBQ July 3rd 2010!! Hi Everyone! It looks like we'll be having our Open House and summer kick off BBQ on July 3rd from 10am to 2pm with a cruise to follow through American Fork Canyon. I started a thread HERE, if anyone is interested jump in!!!! Kind regards, Jordan Priestley 888.308.6007

06-16-2010, 06:06 PM	#3456
RogueSS Drives: Black 2SS/RS M6 #100296 Join Date: Feb 2010 Location: Salt Lake City, UT Posts: 542 View My Garage	Sweet....parts! I'm excited for Friday, wish I didn't have training tomorrow so I could have done it then! __________________ AirRaid CAI, GM Performance Parts Axle Back Exhaust, Pfadt Rear Balance Bar, Pfadt 1.25" Drop Sorings, Elite Engineering PCV Catch Can, Hurst Shifter All work by JDP Motorsports 04/14/12: 381 RWHP 383 RWTQ at JDP Motorsports

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Order tracking for Utah	SSOOCH	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	11	05-06-2009 03:32 PM
Utah Auto show - silver ss with inferno orange interior	kalel	5th Gen Camaro SS LS LT General Discussions	2	01-17-2009 11:18 AM
Utah role call!	SSOOCH	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	3	10-15-2008 09:25 PM
Dealer news in Utah	SSOOCH	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	23	03-27-2008 09:53 PM
GM bringing tricked-out trucks, utes, roadsters and more to SEMA show	KILLER74Z28	General Automotive + Other Cars Discussion	14	11-06-2006 05:44 PM

06-14-2010, 10:47 AM	#3445
slick1ru Drives: 2010 2SS/RS Black Join Date: Sep 2009 Location: Salt Lake City, UT Posts: 350	MHB - Holy freaking BLING! The only thing that is missing is the white gleam they use in the teeth whitening commercials. What do you think? If I took a week off of work to get that done?

06-14-2010, 11:35 AM	#3446
MHB Drives: 2010 Black SS Join Date: Jul 2009 Location: Utah Posts: 17	Slick, So I bumped into someone that pointed out the swirl marks in my car one day and then i have been obsessed with getting rid of them ever sence. So dont look at the sun reflection on your car or your going to start obsessing like I did. Your more then welcome to come up and use my products or take them with you and do it over a weekend. The process took me 8 hours start to finish. I started with the two bucket wash, did a clay bar, then used swirl and hase remover, then a polish, and then sealer. so its basicaly like washing it then waxing it three times. Later MHB

06-16-2010, 04:25 PM	#3452
JDP Motorsports Drives: 2011 Camaro SS/ 2016 Camaro SS Join Date: Jun 2009 Location: Sandy, Utah Posts: 3,256	Here are some spy shoots of Darth V8R's new KOOKS Custom Headers with the black ceramic coating!!! These are SICK!!! And Rouge SS...... Jordan