Elite Engineering Catch Can install - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ackeight · 07-11-2010, 03:53 PM

This was the easiest bolt on to date that I've every done. Took 30 mins for EVERYTHING. I even took out the EVAP lines and sensors. The only thing I was dissapointed with is it didn't include the locking washer for the long stud to be screwed into the ground. Does anybody know what size it is? I'll probably pick one up at Lowes eventually and install it later. I'll give it about 900 miles when I change all my fluids to write up my review on it.

csjcsj · 07-11-2010, 07:04 PM

ackeight · 07-11-2010, 07:32 PM

FINE. I was going to wait for the review, but I'll post the the pics of them and the test drive afterwards. I upgraded the fittings to the chrome finish instead of the bronze. I think it looks 100% better that way. Sorry for the poor quality hood shots. It was dark in the garage and there were people asking for pictures of it too early

. Better quality pics will be posted during the review.

csjcsj · 07-11-2010, 07:49 PM

Thanks

Elite Engineering · 07-12-2010, 11:24 AM

Thanks for the nice comments and great pictures of your Camaro!!

Camarorss350 · 07-12-2010, 12:06 PM

what exactly is the purpose of this mod?

LS3 SS · 07-12-2010, 12:51 PM

So the design has been improved?? I read from another forum member that they had a nightmare installing one of these. I definitely want it to be my next purchase if all is well with the product.

ackeight · 07-12-2010, 01:09 PM

Quote:

Originally Posted by LS3 SS

So the design has been improved?? I read from another forum member that they had a nightmare installing one of these. I definitely want it to be my next purchase if all is well with the product.

I think they had a problem with a supplier slightly changing a design without them knowing. They have that all fixed up now and it's a very slick install.

Camaro21 · 07-12-2010, 02:07 PM

Does anyone have pictures of the install on a Camaro with a Maggie??

silverfox · 07-12-2010, 02:43 PM

Here's the way it looks with a procharger installed. The lean means nothing it works great!

Camarorss350 · 07-18-2010, 10:09 AM

Is there a "How To" or something for this? id like to install one, but dont want to screw up my motor in the process lol

adub4185 · 07-18-2010, 12:06 PM

It's very easy. Here is the detailed install: http://eliteengineeringusa.com/Insta...vcc-Camaro.pdf

Good luck and you won't be disappointed with this can

orange-prince · 07-18-2010, 12:42 PM

what is it for ?

ackeight · 07-18-2010, 12:48 PM

Quote:

Originally Posted by orange-prince

what is it for ?

Here is a good read about the PCV system and catch cans.
http://www.camaro5.com/forums/showth...+oil+separator

07-11-2010, 03:53 PM	#1
ackeight Drives: 10' 2SS/RS Join Date: Jan 2010 Location: Rockwall, TX Posts: 1,389	Elite Engineering Catch Can install This was the easiest bolt on to date that I've every done. Took 30 mins for EVERYTHING. I even took out the EVAP lines and sensors. The only thing I was dissapointed with is it didn't include the locking washer for the long stud to be screwed into the ground. Does anybody know what size it is? I'll probably pick one up at Lowes eventually and install it later. I'll give it about 900 miles when I change all my fluids to write up my review on it.

07-11-2010, 07:04 PM	#2
csjcsj Drives: 2010 Camaro SS/RS 6spd Join Date: Sep 2009 Location: Jefferson, Ga Posts: 4,399	__________________

07-11-2010, 07:32 PM	#3
ackeight Drives: 10' 2SS/RS Join Date: Jan 2010 Location: Rockwall, TX Posts: 1,389	FINE. I was going to wait for the review, but I'll post the the pics of them and the test drive afterwards. I upgraded the fittings to the chrome finish instead of the bronze. I think it looks 100% better that way. Sorry for the poor quality hood shots. It was dark in the garage and there were people asking for pictures of it too early. Better quality pics will be posted during the review.

07-11-2010, 07:49 PM	#4
csjcsj Drives: 2010 Camaro SS/RS 6spd Join Date: Sep 2009 Location: Jefferson, Ga Posts: 4,399	Thanks __________________

07-12-2010, 02:43 PM	#10
silverfox Drives: 2010 camaro ss Join Date: Jun 2009 Location: portsmouth,va. Posts: 502	Here's the way it looks with a procharger installed. The lean means nothing it works great! Attached Images __________________ [SIGPIC][/SIGPIC]Va.Speed built 427 stroker LS2 Darton sleeved 427 stroker.Callies dragonslayer crankshaft. Callies I beam rods. Wiseco blower pistons. Mast cnc 12 degree big bore ls3 heads-2.2 intake &1.6 ex. 6 bolt 270cc-.750 deck. Lunati link bar lifters.T&D roller rockers.COMP-VA. Speed special cam 605 lift, 238dur. Procharger F1R @15psi. ARH headers with custom 3'' exhaust all the way.Magnaflow mufflers. QTP cutouts.Rossler built 6l80e trans. DSS 1400hp axles. Pfadt suspension.-Coilovers, sway bars,motor mounts,trailing arms. Aeromotive eliminater pump. 907rwhp.

07-12-2010, 11:24 AM	#5
Elite Engineering Drives: 2010 Camaro Join Date: Nov 2009 Location: Denver Posts: 1,383	Thanks for the nice comments and great pictures of your Camaro!!

07-12-2010, 12:06 PM	#6
Camarorss350 camaro blogger Drives: 2010 Black on Black SS/RS Join Date: Jul 2009 Location: Central NJ + Atlanta GA Posts: 357	what exactly is the purpose of this mod?

07-12-2010, 12:51 PM	#7
LS3 SS Drives: 2010 Cyber Grey Camaro SS (LS3) Join Date: Mar 2010 Location: Clarksville TN Posts: 2,275	So the design has been improved?? I read from another forum member that they had a nightmare installing one of these. I definitely want it to be my next purchase if all is well with the product.

07-12-2010, 02:07 PM	#9
Camaro21 Drives: SOLD - 2013 M6 ZL1 Join Date: Jul 2009 Location: Texas Posts: 5,040	Does anyone have pictures of the install on a Camaro with a Maggie??

07-18-2010, 10:09 AM	#11
Camarorss350 camaro blogger Drives: 2010 Black on Black SS/RS Join Date: Jul 2009 Location: Central NJ + Atlanta GA Posts: 357	Is there a "How To" or something for this? id like to install one, but dont want to screw up my motor in the process lol

07-18-2010, 12:06 PM	#12
adub4185 Drives: 2010 2SS RS, 2023 Camaro ZLE Join Date: Oct 2009 Location: Dallas, TX Posts: 633	It's very easy. Here is the detailed install: http://eliteengineeringusa.com/Insta...vcc-Camaro.pdf Good luck and you won't be disappointed with this can

07-18-2010, 12:42 PM	#13
orange-prince QATAR 2022 Drives: black cts-V coupe a6 Join Date: Apr 2010 Location: doha-qatar ( middle east ) Posts: 983	what is it for ?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Complete ******** install from a Novice	Susantroy1	Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum	63	07-31-2015 01:25 PM
My JL 12" and JL 250 amp install VIDEO AND PIX!	TAG UR IT	Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum	55	02-12-2011 01:03 AM
4.10 or 3.73 Gear & Install Kit Combo	Apex Paul	Transmission / Driveline	21	08-21-2010 01:55 PM
SW Ohio mod day #2	heinzd01	USA - Great Lakes	473	05-28-2010 11:41 AM
DIY : Install catback on 2010 Camaro SS	Nine Ball	Camaro DIY & HOW-TO instructions & discussions	3	08-09-2009 04:36 PM