Emblempros.com's prototype underhood bowtie pictures - Page 8 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

LadiesMan217 · 07-12-2010, 05:56 PM

Quote:

Originally Posted by dragonZ28

They have absolutely already been approved, and we have paid our up front for the year royalties on them.

We are waiting for one email from the guy in charge of the physical samples, and they will be for sale that day. I am estimating this time to be two weeks from now. That's about right, based upon history.

Thanks, Roger

Awesome! Any way you can post install pics? Do we know how these are attached yet?

dragonZ28 · 07-12-2010, 07:35 PM

Quote:

Originally Posted by LadiesMan217

Awesome! Any way you can post install pics? Do we know how these are attached yet?

We have installed pics at the start of the thread. For now our attachment method is still secret. Not glue, or silicone.

LadiesMan217 · 07-12-2010, 08:42 PM

Quote:

Originally Posted by dragonZ28

We have installed pics at the start of the thread. For now our attachment method is still secret. Not glue, or silicone.

Ok, I understand...I was asking about the attachment method. Can you tell us if any cutting or drilling is involved?

dragonZ28 · 07-13-2010, 11:08 AM

Quote:

Originally Posted by LadiesMan217

Ok, I understand...I was asking about the attachment method. Can you tell us if any cutting or drilling is involved?

No drilling. A little cutting of the hood liner is required. We like the method we have come up with. We are always looking to improve.

Thanks, Roger

LadiesMan217 · 07-13-2010, 11:10 AM

Quote:

Originally Posted by dragonZ28

No drilling. A little cutting of the hood liner is required. We like the method we have come up with. We are always looking to improve.

Thanks, Roger

Nice...I was worried about the sheetmetal on the car getting disturbed by the install...but now I'm very excited.

Hmmm...high powered magnets perhaps. LOL

dragonZ28 · 07-13-2010, 11:37 AM

Quote:

Originally Posted by LadiesMan217

Nice...I was worried about the sheetmetal on the car getting disturbed by the install...but now I'm very excited.

Hmmm...high powered magnets perhaps. LOL

Stainless isn't magnetic, and we could tape magnets into place, but we decided not to do that for a very good reason.

Magnets disrupt and can short out/shut down electrical components, and a high strength magnet can interfere with your drive-by-wire function and your electrical components located directly below and around this piece. Magents simply would not be safe, and pose a potentially huge liability.

Ovenmitt · 07-13-2010, 11:57 AM

A large flat washer and c-clip would be the most intelligent way to mount them, if there were small round posts on the backside of the emblem. It would be simple, unnoticeable, cheap, and removable.

Dave2SSRS · 07-13-2010, 01:22 PM

Whatever your mounting mech. is I am sure it works GREAT. Now, about placing my order!! :P

Speedy One · 07-13-2010, 07:18 PM

Roger,

Please PM me as soon as they are avalible. I want one, great job fellas.

Speedy One

dragonZ28 · 07-14-2010, 08:19 PM

Quote:

Originally Posted by Speedy One

Roger,

Please PM me as soon as they are avalible. I want one, great job fellas.

Speedy One

I will do that for you.

dragonZ28 · 07-14-2010, 08:19 PM

Quote:

Originally Posted by Dave2SSRS

Whatever your mounting mech. is I am sure it works GREAT. Now, about placing my order!! :P

I will have to check to be sure, but I think you are on my notification list

Still expecting two weeks for sale time.

dragonZ28 · 07-14-2010, 08:22 PM

We have a very good mounting system, that is reversible, if it ever needed to be, but still permanent if needed to be.

Things we will be supplying "in the box"
1) The hood bowtie customized to your specs. GM approved quality.

2) All mounting hardware included. Nothing for you to buy.

3) Very clear mounting instructions.

Things we will be supplying as part of our normal service
1) Our famous phone service if needed.

2) Very Very Very custoimizeable parts

3) Our fast production, and shipping times.

4) Reasonable prices.

Thanks for all of your good words.

formare · 07-14-2010, 08:37 PM

These folks are top notch suppliers. Really like there products and customer service is great...

LRod · 07-14-2010, 09:07 PM

Quote:

Originally Posted by Speedy One

Roger,

Please PM me as soon as they are avalible. I want one, great job fellas.

Speedy One

Please add me to your notification list as well. Thank you!

07-13-2010, 01:22 PM	#106
Dave2SSRS Drives: 2010 Camaro 2SS/RS Join Date: Mar 2010 Location: Houston, TX Posts: 487	Whatever your mounting mech. is I am sure it works GREAT. Now, about placing my order!! :P __________________ 2010 Camaro 2SS/RS Imperial Blue \| Grey two-tone Interior \| Silver racing stripes \| Magnaflow Comp Cat-back \| CAI intake \| Elite Engineering Tunnel Brace \| Richmond (Houston), TX

07-14-2010, 08:37 PM	#111
formare The Milano Drives: 2017 Firefly ShipWorks Join Date: Jun 2010 Location: Chicagoland (Crown Point, IN) Posts: 1,877 View My Garage	These folks are top notch suppliers. Really like there products and customer service is great... __________________ My first Love. She was called "Miss Carriage" (still cry when I think about her) 383, Muncie 4 speed, custom linkage mated to hurst short throw shifter.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Bowtie Modification for the Heritage Grille with SS emblem	cerberus	Cosmetics and Lighting Modification Discussions	19	11-08-2011 09:26 AM
Underhood Bowtie	Orangeshehot	Cosmetics and Lighting Modification Discussions	4	01-04-2010 05:11 PM
Billet Bowties from ChevyMall	Angelina	Cosmetics and Lighting Modification Discussions	9	10-06-2009 12:04 PM
bowtie emblem for underhood padding	oldfart1941	Cosmetics and Lighting Modification Discussions	8	07-29-2009 07:41 AM
Underhood Bowtie	fixxer56	Cosmetics and Lighting Modification Discussions	31	02-06-2009 09:19 PM

07-13-2010, 11:57 AM	#105
Ovenmitt Account Suspended Drives: 2011 RJT 1SS Join Date: Apr 2010 Location: Fort Lewis, Washington Posts: 730	A large flat washer and c-clip would be the most intelligent way to mount them, if there were small round posts on the backside of the emblem. It would be simple, unnoticeable, cheap, and removable.

07-13-2010, 07:18 PM	#107
Speedy One Drives: 2010 Camaro SS/RS Join Date: Jul 2009 Location: Montana Posts: 42	Roger, Please PM me as soon as they are avalible. I want one, great job fellas. Speedy One

07-14-2010, 08:22 PM	#110
dragonZ28 Drives: 2001 T/A, 2010 2SS/RS, 2006 Z06 Join Date: Apr 2009 Location: Lexington, KY Posts: 2,426	We have a very good mounting system, that is reversible, if it ever needed to be, but still permanent if needed to be. Things we will be supplying "in the box" 1) The hood bowtie customized to your specs. GM approved quality. 2) All mounting hardware included. Nothing for you to buy. 3) Very clear mounting instructions. Things we will be supplying as part of our normal service 1) Our famous phone service if needed. 2) Very Very Very custoimizeable parts 3) Our fast production, and shipping times. 4) Reasonable prices. Thanks for all of your good words.