HUD for the 2010 Camaro Owners????? - Page 7 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

thebrainhart · 07-17-2010, 08:08 PM

I'm mostly posting so I can subscribe...

But will the HUD computer be able to communicate fine with the other modules, so it knows what to display?

I'm a Dodge/Chrysler/Jeep tech, and in the Chrysler world, each module talks to the other along the bus lines, but each of those modules need to know to send that info. Are the other modules in a 2010 able to talk to a 2011 HUD module, or can you program them to do so?

Great work, and thank you for always taking the initiative to do these things to make the best car in the world even better!

2SSRS@Gen5diy · 07-17-2010, 09:16 PM

Quote:

Originally Posted by thebrainhart

I'm mostly posting so I can subscribe...

But will the HUD computer be able to communicate fine with the other modules, so it knows what to display?

I'm a Dodge/Chrysler/Jeep tech, and in the Chrysler world, each module talks to the other along the bus lines, but each of those modules need to know to send that info. Are the other modules in a 2010 able to talk to a 2011 HUD module, or can you program them to do so?

Great work, and thank you for always taking the initiative to do these things to make the best car in the world even better!

That is a good question, GM dos the same i think as Chrysler, on this car all the instruments talk on the same Bus line, And it is the same on the 2010 and 2011, That is why i think it will not need to be programed, If i remember right the 4 pack gauges did not need to be programed, If that is right then no need for programing.

Hope that help's you out, I made a temp let for cutting out the switch opening in the dash will get it done in the morning as its to hot out side right now, I will post some pic's later in the day.

Here are 4 pic's of the temp let i made for cutting out the opening, Its that thin blue paper you see on top of the book.

SummoneR · 07-17-2010, 09:22 PM

Your really going to cut it into the dash before you find out if it works? I'd mock it up and see if it worked before I'd cut my dash up. Just my opinion is all

Quote:

Originally Posted by 2SSRS

I looked in to the price of the windshields the 2011 have with and without HUD
windshields, But the funny part is there the same price.

Good to know, less reason for my insurance company to bock at me replacing it with a 2011 window.

2SSRS@Gen5diy · 07-17-2010, 09:33 PM

Quote:

Originally Posted by SummoneR

Your really going to cut it into the dash before you find out if it works? I'd mock it up and see if it worked before I'd cut my dash up. Just my opinion is all

Good to know, less reason for my insurance company to bock at me replacing it with a 2011 window.

Life is fool of risk, And if you take no risk how do you know if you are alive, I heard that some where. LOL

Besides if it doesn't work the switch will look Cool in the dash.

SummoneR · 07-17-2010, 09:38 PM

Quote:

Originally Posted by 2SSRS

Life is fool of risk, And if you take no risk how do you know if you are alive, I heard that some where. LOL

Besides if it doesn't work the switch will look Cool in the dash.

Nice.

2SSRS@Gen5diy · 07-17-2010, 10:23 PM

So i got bored and cut the dash to fit the switch in the dash. here you go 2 pic before and after.

Chewy · 07-18-2010, 10:46 AM

looks good so far!

waiting for more updates

pauljbouda · 07-19-2010, 12:50 PM

im liking what im hearing so far!

Ivan @ Southwest Speed · 07-23-2010, 03:10 AM

IN FOR THE SUB!!!

Keep up the good work.
Ivan

LS3SSRS · 07-23-2010, 04:10 AM

subscribed! if this works i'm in on this mod. thanks for stepping up!

strauchpete · 07-23-2010, 10:54 AM

Not sure if this has been said but the under dash already has the cut out and mounting for the factory HUD

2SSRS@Gen5diy · 07-23-2010, 10:56 AM

Thank you, Yes i posted i pic last week that all the space is there, But TY

nvusmcsgt · 07-23-2010, 12:16 PM

Can't wait to see the final verdict on this project.

Kendell347 · 07-23-2010, 12:25 PM

Subscribed

07-17-2010, 08:08 PM	#85
thebrainhart Drives: '10 Camaro 2SS/RS CGM LS3 A6 Join Date: May 2009 Location: Bountiful, UT Posts: 683	I'm mostly posting so I can subscribe... But will the HUD computer be able to communicate fine with the other modules, so it knows what to display? I'm a Dodge/Chrysler/Jeep tech, and in the Chrysler world, each module talks to the other along the bus lines, but each of those modules need to know to send that info. Are the other modules in a 2010 able to talk to a 2011 HUD module, or can you program them to do so? Great work, and thank you for always taking the initiative to do these things to make the best car in the world even better! __________________ - 2010 Camaro 2SS/RS CGM LS3 A6 "Lurch" - FLYNGSS - Some ProCharger, Alky, CompCams, Brian Tooley, Holley, Livernois, K&N, Ridetech, DSS, Kooks, JDP Motorsports, Pfadt, BMR, Prothane, Weld, M&H, Mickey Thompson, RKSport, Elite, Garys, Defenderworx, Anvil, etc.

07-17-2010, 10:23 PM	#90
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,728 View My Garage	So i got bored and cut the dash to fit the switch in the dash. here you go 2 pic before and after. Attached Images

07-18-2010, 10:46 AM	#91
Chewy My boredom isn't safe Drives: 2010 SS Camaro Join Date: Sep 2008 Location: Jacksonville, FL Posts: 1,224 View My Garage	looks good so far! waiting for more updates __________________

07-19-2010, 12:50 PM	#92
pauljbouda Drives: 2010 Camaro 2SS/RS Blk/Blk Join Date: Jul 2009 Location: Jacksonville Fl Posts: 104	im liking what im hearing so far! __________________ 1100, Preliminary order accepted 07-15-09 NMHH54 3000, Accepted by production control 09-10-09 (TPW 09-28-09) 3100, Order available to sequence 09-16-09 3300, Scheduled for production 09-18-09 3400, Broadcast - Being Built 09-26-09 3800, Produced - Built- has VIN 10-07-09 #53797 5000, Delivered to the dealer 10-19-09 Home on 10-20-09!!

07-23-2010, 04:10 AM	#94
LS3SSRS Drives: 2010 IBM SS/RS Join Date: Oct 2008 Location: Edmonton, Alberta Posts: 805	subscribed! if this works i'm in on this mod. thanks for stepping up! __________________ sold 2010 2SS/RS, 6spd manual, imperial blue metallic w/black leather Blacked out tail/signal lights, 5% rear tint, 20% sides, Dynomax Bullet mufflers, Barton short throw shifter, Clear Image offroad downpipes

07-23-2010, 03:10 AM	#93
Ivan @ Southwest Speed Drives: '15 Z06, '01 NBM SS, '97 SS Join Date: May 2009 Location: Rio Rancho, NM Posts: 12,161	IN FOR THE SUB!!! Keep up the good work. Ivan

07-23-2010, 10:54 AM	#95
strauchpete Account Suspended Drives: 2010 Camaro 1LT Join Date: Dec 2009 Location: Sedalia, Missouri Posts: 338 View My Garage	Not sure if this has been said but the under dash already has the cut out and mounting for the factory HUD

07-23-2010, 10:56 AM	#96
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,728 View My Garage	Thank you, Yes i posted i pic last week that all the space is there, But TY

07-23-2010, 12:16 PM	#97
nvusmcsgt Drives: 2010 Camaro SS Yellow Join Date: Jun 2010 Location: Reno, NV Posts: 60	Can't wait to see the final verdict on this project.

07-23-2010, 12:25 PM	#98
Kendell347 Doc Drives: BLACKOUT & Fifty Join Date: Jul 2009 Location: Long Island, NY Posts: 1,580 View My Garage	Subscribed __________________ 1100-7/20/2009 * 6000-2/4/10 Proud Owner of Autographed Litho # 1282010 Camaro 2 SS/RS - BLACKOUT & 2017 Camaro 2 SS - 50th Anniversary #894 WWW. NY5THGEN.COM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Does the v6 have enough power?	cstproductions	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	305	08-29-2012 10:27 PM
Ambient lighting (ABL) - the FINAL update = LIMITED TO DOOR PANELS	CamaroScotty	5th Gen Camaro SS LS LT General Discussions	338	04-15-2009 06:33 PM
Answeres to questions I have stumbled on	dieseldave24v	5th Gen Camaro SS LS LT General Discussions	13	02-23-2009 07:56 PM