Where's the best place around Ft. Lewis... - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Revenant · 07-31-2010, 04:45 PM

Thanks for the info. Someone else recommended Parkland. I'll prolly see what they have or maybe just order my own.

Iroczlover · 07-31-2010, 04:48 PM

our club still has dealing with them for parts since we have a discount through them lol.

Revenant · 07-31-2010, 04:50 PM

Wow, just checked the photos section of your PNWCC group, very nice rides.

Revenant · 07-31-2010, 04:53 PM

I'm looking to get a 2010 CGM 1SS. I'm hoping to get it for 29,000 to 30,000 cash. Hopefully since i'm paying cash, i'll have some leverage.

Iroczlover · 07-31-2010, 04:53 PM

Quote:

Originally Posted by Revenant

Wow, just checked the photos section of your PNWCC group, very nice rides.

thanks lol,
still have lot more pictures to go in there, & this week is reno so there will be more pictures on it.

Iroczlover · 07-31-2010, 04:56 PM

Quote:

Originally Posted by Revenant

I'm looking to get a 2010 CGM 1SS. I'm hoping to get it for 29,000 to 30,000 cash. Hopefully since i'm paying cash, i'll have some leverage.

check out Craigslist, alot of the dealerships in the area put their cars on there.

Iroczlover · 07-31-2010, 05:04 PM

just went through some of the dealerships websites, i saw this one @ good Chevrolet which is in Kent http://www.goodchevrolet.com/invento...rent=1&size=10

Revenant · 07-31-2010, 05:13 PM

Neeeat, I submited a message for that dealship, thank you very much IrocZlover girl. = )

Iroczlover · 07-31-2010, 05:15 PM

Quote:

Originally Posted by Revenant

Neeeat, I submited a message for that dealship, thank you very much IrocZlover girl. = )

lol Heck I am army bratt that married up to Airforce lol. lol I have lived in this area most of my life lol. I am good at searching out information

Revenant · 07-31-2010, 05:19 PM

Quote:

Originally Posted by Iroczlover

lol Heck I am army bratt that married up to Airforce lol. lol I have lived in this area most of my life lol. I am good at searching out information

I appreciate all your help. Hopefully i'll meet you and your husband at one of those camaro get togethers.

Iroczlover · 07-31-2010, 05:23 PM

Quote:

Originally Posted by Revenant

I appreciate all your help. Hopefully i'll meet you and your husband at one of those camaro get togethers.

well theres still some shows going on through out sept & you will have some time off when you get back. lol

Revenant · 07-31-2010, 05:26 PM

Quote:

Originally Posted by Iroczlover

well theres still some shows going on through out sept & you will have some time off when you get back. lol

Sounds good to me, hopefully i'll be there in a CGM SS with black stripes. I have many mods in mind that will have to wait though. Starting with a PFADT suspension.

SSmoothie · 07-31-2010, 11:13 PM

I bought mine at Titus Will in Olympia and had a good experience, paid 1000 under MSRP with my Credit Union discount.

firestone_ss · 07-31-2010, 11:48 PM

if your looking to have lowering springs put in, most shops can do it,ive done 2 sets of eibachs,both on SS camaros with a 1inch drop turned out great,just find a reputable place and go in and chat with the techs, in my shop there are a few of us that do this kind of work on our own cars and customers cars we also have a couple of really exp. sales guys that know there stuff,if your in the south hill area come look us up.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Local tire place messed up my paint, need advice	philipdistefano	5th Gen Camaro SS LS LT General Discussions	35	04-21-2010 08:12 AM
L99 all over the place!	2SSARMY	Dragstrip and Launch Techniques Discussion	24	04-20-2010 11:51 PM
Wheres a good place in North NJ to get a Maggie installed	stealth camaro	USA - NY / NJ / PA	13	04-15-2010 07:24 AM
"There's no place like Kansas."	The_Blur	USA - Rockies / Midwest	1	10-18-2009 10:30 PM
Looking for a place to go hunting	ZZcamaro	Off-topic Discussions	11	10-07-2009 12:53 PM

07-31-2010, 04:45 PM	#15
Revenant Drives: '11 1SS LS3 and '90 240sx hatch. Join Date: Jul 2010 Location: Tacoma, WA Posts: 308	Thanks for the info. Someone else recommended Parkland. I'll prolly see what they have or maybe just order my own.

07-31-2010, 04:48 PM	#16
Iroczlover The Krazzy bytch Drives: Which car I have 9 vehicles? Join Date: Jun 2008 Location: Yelm, wa, Hell if I think about it to much Posts: 7,918	our club still has dealing with them for parts since we have a discount through them lol.

07-31-2010, 04:50 PM	#17
Revenant Drives: '11 1SS LS3 and '90 240sx hatch. Join Date: Jul 2010 Location: Tacoma, WA Posts: 308	Wow, just checked the photos section of your PNWCC group, very nice rides.

07-31-2010, 04:53 PM	#18
Revenant Drives: '11 1SS LS3 and '90 240sx hatch. Join Date: Jul 2010 Location: Tacoma, WA Posts: 308	I'm looking to get a 2010 CGM 1SS. I'm hoping to get it for 29,000 to 30,000 cash. Hopefully since i'm paying cash, i'll have some leverage.

07-31-2010, 05:04 PM	#21
Iroczlover The Krazzy bytch Drives: Which car I have 9 vehicles? Join Date: Jun 2008 Location: Yelm, wa, Hell if I think about it to much Posts: 7,918	just went through some of the dealerships websites, i saw this one @ good Chevrolet which is in Kent http://www.goodchevrolet.com/invento...rent=1&size=10

07-31-2010, 05:13 PM	#22
Revenant Drives: '11 1SS LS3 and '90 240sx hatch. Join Date: Jul 2010 Location: Tacoma, WA Posts: 308	Neeeat, I submited a message for that dealship, thank you very much IrocZlover girl. = )

07-31-2010, 11:13 PM	#27
SSmoothie Drives: 2010 Camaro 2SS/RS 6SP Blk/Blk Join Date: Aug 2009 Location: WA Posts: 920 View My Garage	I bought mine at Titus Will in Olympia and had a good experience, paid 1000 under MSRP with my Credit Union discount.

07-31-2010, 11:48 PM	#28
firestone_ss Drives: 2010 camaro ss Join Date: May 2009 Location: Tacoma WA Posts: 779	if your looking to have lowering springs put in, most shops can do it,ive done 2 sets of eibachs,both on SS camaros with a 1inch drop turned out great,just find a reputable place and go in and chat with the techs, in my shop there are a few of us that do this kind of work on our own cars and customers cars we also have a couple of really exp. sales guys that know there stuff,if your in the south hill area come look us up.