X1 + X2 Harness Interest - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Racer606 · 08-10-2010, 05:55 PM

Any updates on possibly getting all three harnesses available?

badazss · 08-10-2010, 05:56 PM

count me in
I'd be in for an X1, X2

Topdown · 08-10-2010, 06:03 PM

is all this specific to the Boston System?

I was planning on putting a system in my non-BA 1SS but figured I would grab the signal as close to the head unit as possible to keep the signal cleaner... so grabbing the signal from the 6x9 in the trunk is not a good solution for me.

2010SSRSM6 · 08-11-2010, 01:40 PM

Quote:

Originally Posted by Topdown

is all this specific to the Boston System?

I was planning on putting a system in my non-BA 1SS but figured I would grab the signal as close to the head unit as possible to keep the signal cleaner... so grabbing the signal from the 6x9 in the trunk is not a good solution for me.

I believe it is specific to the BA system since there isn't an amp in the trunk for the non BA system.

Moriartii · 08-11-2010, 02:08 PM

Yes I think it is specific to the BA system. I am not sure where this went as once the X3 connector came out I hadnt heard much on the other two, especially since the initial cost outlay was alot for Steve.

I just read in another part of this forum that Visteon went out of business (that is who makes the BA amp) maybe this will cause a different solution to be implemented?
Cheers
K

BlueGrill · 08-12-2010, 01:25 AM

yeah count me in for X2 and I would even grab the X1 too, to support the cause. Already have X3 from Steve. And I was hinting to Steve for X2 in my last post a couple days ago....

2010SSRSM6 · 08-12-2010, 12:42 PM

Quote:

Originally Posted by Steve@********

I could actually have the harness built without those wires (center speaker and rear tweets), but I'd probably get someone bitchin that they need to be able to wire up the center speaker for whatever reason so it's best to have all wires present.

I bet you could build it any way you want and you would get them sold.

I don't think the center channel is required. Most of us have disconnected it anyway.

Rear 6x9's should be used for fill only and don't need to be amplified. Set up the harness for front tweeter and mid-driver and get those bad boy's out.

PLEASE!!!!!!!!!!

southpawblues · 08-27-2010, 04:03 PM

Where do I sign? :-) X1 and X2

08-10-2010, 05:56 PM	#30
badazss SS-500HP Drives: 2010 Camaro 2SS/RS RJT Join Date: Jul 2010 Location: Cranberry Twp Pa Posts: 401 View My Garage	count me in I'd be in for an X1, X2 __________________ 2ssrs m6 Red jewel tintcoat Daily Driver 05 silverado ext cab z71 My Build Journal http://www.camaro5.com/forums/showthread.php?t=103089

08-10-2010, 06:03 PM	#31
Topdown The wait is over! Drives: 2010 Camaro, IOM, L99, Auto Join Date: Mar 2010 Location: Washington Posts: 1,081	is all this specific to the Boston System? I was planning on putting a system in my non-BA 1SS but figured I would grab the signal as close to the head unit as possible to keep the signal cleaner... so grabbing the signal from the 6x9 in the trunk is not a good solution for me. __________________ Ordered - 4/17/2010 Delivered - 5/29/2010 AlphaDamp CLD Mat - Get more Sound Deadening with less Sound Deadener

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2010 Camaro RS DRL wireless harness interest	fieldgoal00	Exterior Parts & Accessories	9	04-09-2010 02:30 PM

08-10-2010, 05:55 PM	#29
Racer606 Drives: '10 Camaro SS/RS, '03 Mini Cooper S Join Date: May 2009 Location: Charlotte, NC Posts: 80 View My Garage	Any updates on possibly getting all three harnesses available?

08-11-2010, 02:08 PM	#33
Moriartii Drives: 11 IOM 2SS/RS M6 w/Hurst Join Date: Nov 2009 Location: Austin Texas Posts: 1,269	Yes I think it is specific to the BA system. I am not sure where this went as once the X3 connector came out I hadnt heard much on the other two, especially since the initial cost outlay was alot for Steve. I just read in another part of this forum that Visteon went out of business (that is who makes the BA amp) maybe this will cause a different solution to be implemented? Cheers K

08-12-2010, 01:25 AM	#34
BlueGrill Drives: 2010 Camaro Join Date: Aug 2010 Location: Arizona Posts: 12	yeah count me in for X2 and I would even grab the X1 too, to support the cause. Already have X3 from Steve. And I was hinting to Steve for X2 in my last post a couple days ago....

08-27-2010, 04:03 PM	#36
southpawblues Drives: 2SS, RS,IOM,Tan leath. DEC 09 Join Date: Aug 2009 Location: Normal, IL Posts: 35	Where do I sign? :-) X1 and X2