OUR BLOWER CAM MAKES 445 RWHP N/A - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

JANNETTYRACING · 08-24-2010, 09:50 AM

I was pretty pleased to see our blower cam make 445 RWHP naturally asparated.

We have a custom Bob, who is building up to our Street Killer Package a step at a time.

Albeit it is a little down on torque compared to our NA Cam.

Our N/A cam is a real torque monster.

Ted.

sspaul · 08-24-2010, 09:54 AM

so what are the specs on both cams?

BUMBLE-B-TUNA · 08-24-2010, 10:30 AM

Hey Ted,

What kind of power/torque does your N/A cam put out?

JANNETTYRACING · 08-24-2010, 10:52 AM

Quote:

Originally Posted by sspaul

so what are the specs on both cams?

Specs come in the box LOL

JANNETTYRACING · 08-24-2010, 10:53 AM

Quote:

Originally Posted by BUMBLE-B-TUNA

Hey Ted,

What kind of power/torque does your N/A cam put out?

445 with 430 torque, cool Idle, Great driveability.

Ted.

Treefrog · 08-24-2010, 11:22 AM

I see where that cam package requires your 415rhp street package installed.. So, the cam package adds 30rhp? Am I missing something or this is considered normal?

I'm looking to install a cam in my Ls3.. Also some LT headers..

JANNETTYRACING · 08-24-2010, 11:30 AM

Quote:

Originally Posted by Treefrog

I see where that cam package requires your 415rhp street package installed.. So, the cam package adds 30rhp? Am I missing something or this is considered normal?

I'm looking to install a cam in my Ls3.. Also some LT headers..

That is Correct, Like other mods if we did cam alone we would see greater gains but when you start stacking mods the gains get smaller.

This Is Normal on Our Dyno and with our Closed Hood Testing Procedures, open hood is probably worth another 10 HP with the Airaid open top box.

Also There are Bigger Cams that will make more Peak Power but at the expense of Idle quality, and driveability, bucking at low speeds etc.

445 RWHP Ain't No Joke, this car is Quick.

That is 70+ RWHP over stock on an Already very impressive engine.

Ted.

CamaroSS8491 · 08-24-2010, 11:39 AM

Quote:

Originally Posted by JANNETTYRACING

That is Correct, Like other mods if we did cam alone we would see greater gains but when you start stacking mods the gains get smaller.

This Is Normal on Our Dyno and with our Closed Hood Testing Procedures, open hood is probably worth another 10 HP with the Airaid open top box.

Also There are Bigger Cams that will make more Peak Power but at the expense of Idle quality, and driveability, bucking at low speeds etc.

445 RWHP Ain't No Joke, this car is Quick.

That is 70+ RWHP over stock on an Already very impressive engine.

Ted.

Whats the longevity of the motor with a cam like this? If your not abusing the power.

JANNETTYRACING · 08-24-2010, 11:58 AM

Quote:

Originally Posted by CamaroSS8491

Whats the longevity of the motor with a cam like this? If your not abusing the power.

Same As Stock as we upgrade all the matching valvetrain components.

Ted.

2010 SSRS · 08-24-2010, 12:08 PM

what are the numbers on the L99 street package with a cam install ?

sspaul · 08-24-2010, 12:10 PM

Quote:

Originally Posted by 2010 SSRS

what are the numbers on the L99 street package with a cam install ?

i would think some where around 415-420 rwhp. i could be wrong

JANNETTYRACING · 08-24-2010, 12:20 PM

Quote:

Originally Posted by 2010 SSRS

what are the numbers on the L99 street package with a cam install ?

Cam on an L99 would be a big variable, depending on if you go with a drop in L99 cam or an LS3 conversion and cam package, and it would still make a little less power due to the lower compression.

Ted.

Treefrog · 08-24-2010, 12:22 PM

Quote:

Originally Posted by JANNETTYRACING

That is Correct, Like other mods if we did cam alone we would see greater gains but when you start stacking mods the gains get smaller.

This Is Normal on Our Dyno and with our Closed Hood Testing Procedures, open hood is probably worth another 10 HP with the Airaid open top box.

Also There are Bigger Cams that will make more Peak Power but at the expense of Idle quality, and driveability, bucking at low speeds etc.

445 RWHP Ain't No Joke, this car is Quick.

That is 70+ RWHP over stock on an Already very impressive engine.

Ted.

Would you say this cam gives the cammed idle impression? You say it does not give up idle quality, can you requalify that statement? I'm wanting that cam'd idle sound for certain.. Don't mind a little shake with my milk..

JANNETTYRACING · 08-24-2010, 01:00 PM

Quote:

Originally Posted by Treefrog

Would you say this cam gives the cammed idle impression? You say it does not give up idle quality, can you requalify that statement? I'm wanting that cam'd idle sound for certain.. Don't mind a little shake with my milk..

I has the Cool Cam sound with out the too big of a cam poor driveability concerns.

08-24-2010, 09:50 AM	#1
JANNETTYRACING Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009 Location: ON THE DYNO WATERBURY CT. Posts: 15,427	OUR BLOWER CAM MAKES 445 RWHP N/A I was pretty pleased to see our blower cam make 445 RWHP naturally asparated. We have a custom Bob, who is building up to our Street Killer Package a step at a time. Albeit it is a little down on torque compared to our NA Cam. Our N/A cam is a real torque monster. Ted. __________________ www.jannettyracing.com Celebrating 39 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com

08-24-2010, 09:54 AM	#2
sspaul Drives: 2010 ss camaro, imperial blue Join Date: Sep 2009 Location: new orleans Posts: 939	so what are the specs on both cams? __________________ my youtube my facebook www.myspace.com/1djchampagne www.twitter.com/1djchampagne mods: borla long tube headers, borla atak catback, lingenfelter gt-9 cam, ported heads, ecs base kit running 11 psi on top end, 1" bmr drop spring, aam 3.70 gears, ported throttle body, 160* thermorstat, lethal racing tune 750/641 rwhp/rwtq

08-24-2010, 12:08 PM	#10
2010 SSRS Drives: 3 V8 Camaros Join Date: May 2009 Location: The Ocean State Posts: 111,186 View My Garage	what are the numbers on the L99 street package with a cam install ? __________________ Jannetty Racing JRE Street Package

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cam basics	CamaroSpike23	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	76	11-25-2015 12:42 PM

08-24-2010, 10:30 AM	#3
BUMBLE-B-TUNA Drives: 2010 SS Join Date: Nov 2009 Location: Lake Cowichan BC, Canada/Buckeye AZ Posts: 417 View My Garage	Hey Ted, What kind of power/torque does your N/A cam put out?

08-24-2010, 11:22 AM	#6
Treefrog U235 is fun! Drives: CGM 2SS/M6 Join Date: Apr 2009 Location: Florence, AL Posts: 403	I see where that cam package requires your 415rhp street package installed.. So, the cam package adds 30rhp? Am I missing something or this is considered normal? I'm looking to install a cam in my Ls3.. Also some LT headers..