BBK Long Tube Headers & Magnaflow Exhaust (sound video) - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

PoorMansCamaro · 06-11-2010, 04:13 PM

Quote:

Originally Posted by darwin

i forgot to ask you, did you get this with ceramic coating or just stainless.

sorry to butt in, but i'm bored! lol it's ceramic, here's a quote from him in another thread...

Quote:

Originally Posted by OUR BEE

Yeah Ceramic coating is the way to go.

darwin · 06-12-2010, 02:49 PM

i guess i will probably go with ceramic then. i was just gonna go with stainless steel. i will wait till you get your video up so i can listen to it. i think the corsa sounds the best for cat backs. i just got my car back from the shop so now i am ready to do things to it. some elderly guy hit me on my side a month ago.

PoorMansCamaro · 06-12-2010, 03:17 PM

Ouch! That sucks!

Ok, my email says the exhaust will ship between june10-15. So hopefully I can get a vid up next week or weekend.

darwin · 06-13-2010, 07:13 PM

sounds good to me, i am on this thread every day so i will be looking out for it.

2010 SSRS · 06-13-2010, 07:17 PM

sounds very good

WHIPPLECHARGED · 08-24-2010, 01:25 AM

Finally updated with some new videos of outside the car. Edited the first post so feel free to take a listen.

KMPrenger · 08-24-2010, 01:39 PM

Quote:

Originally Posted by OUR BEE

Finally updated with some new videos of outside the car. Edited the first post so feel free to take a listen.

Sweet, can't wait to give them a listen once I get home!

Iwantone2 · 08-24-2010, 02:38 PM

DAMN!!!! That sounds really good!!!

KMPrenger · 08-24-2010, 06:35 PM

Just got to give them a good listen and they sound great! I just love the sound those BBKs provide and yours is my favorite setup thus far. The only other one that makes me grin as much is the BBK + Pypes cat-back video, but only on start up and small revs....other than that, its just too much for me!

So I noticed you removed your cold start and reving video. Are you planning on doing a new one? Cause I really enjoyed that video to! I'd like to keep a link of it on the sticky if it is ok with you, but just let me know.

Are you still having to reset the CEL every once in awhile?

WHIPPLECHARGED · 08-24-2010, 11:57 PM

Quote:

Originally Posted by KMPrenger

Just got to give them a good listen and they sound great! I just love the sound those BBKs provide and yours is my favorite setup thus far. The only other one that makes me grin as much is the BBK + Pypes cat-back video, but only on start up and small revs....other than that, its just too much for me!

So I noticed you removed your cold start and reving video. Are you planning on doing a new one? Cause I really enjoyed that video to! I'd like to keep a link of it on the sticky if it is ok with you, but just let me know.

Are you still having to reset the CEL every once in awhile?

Thanks: Being your favorite exhaust system is a big compliment since it is coming from you. You are probably the only one on C5 who has listened to every exhaust clip that has been posted in this forum, since you are the creator of the exhaust STICKY.

I did remove the cold start because I'm not satisfied with the quality of the video, since it had a background noise that interfered with the sound. You can keep it in the sticky, but I will be redoing the video with no background noise. Will have it posted in a couple days.

My CEL has not been on lately, but I have been monitoring my rear sensors. They are reading too rich... should be reading .5 volts and they are at .8 volts. I will be modifying the non foulers I installed. Going to drill one out so the sensor will mount flush and then going to add a third one. Don't know if its going to help lower the voltage, but it is worth a try.

usa1camaro1969 · 08-25-2010, 12:03 AM

What are you using to monitor the rear sensors and reset the CEL's?
Let us know how the third non-fouler and mod works out. I really want these headers but really don't want to get forced into a tune yet.

PoorMansCamaro · 08-25-2010, 12:47 AM

OUR BEE, do you mind meeting me somewhere within the next day or two to read my o2 sensor with whatever it is your using? And if my CEL is on, maybe check to see if they are the same code as yours?

WHIPPLECHARGED · 08-25-2010, 10:27 AM

Quote:

Originally Posted by usa1camaro1969

What are you using to monitor the rear sensors and reset the CEL's?
Let us know how the third non-fouler and mod works out. I really want these headers but really don't want to get forced into a tune yet.

Electronic Specialties diagnostic tool (ES910 Scan Buddy). Has around 15 live data parameters that you can monitor.

WHIPPLECHARGED · 08-25-2010, 10:28 AM

Quote:

Originally Posted by PoorMansCamaro

OUR BEE, do you mind meeting me somewhere within the next day or two to read my o2 sensor with whatever it is your using? And if my CEL is on, maybe check to see if they are the same code as yours?

PM your # and I'll give you a call.

06-12-2010, 03:17 PM	#17
PoorMansCamaro Drives: Really Slow Join Date: Apr 2010 Location: PA Posts: 57,201	Ouch! That sucks! Ok, my email says the exhaust will ship between june10-15. So hopefully I can get a vid up next week or weekend. __________________

06-13-2010, 07:17 PM	#19
2010 SSRS Drives: 3 V8 Camaros Join Date: May 2009 Location: The Ocean State Posts: 111,186 View My Garage	sounds very good __________________ Jannetty Racing JRE Street Package

08-24-2010, 01:25 AM	#20
WHIPPLECHARGED Drives: 2011 1SS Join Date: Mar 2010 Location: Vegas Posts: 736	Finally updated with some new videos of outside the car. Edited the first post so feel free to take a listen. __________________

08-24-2010, 02:38 PM	#22
Iwantone2 Voice Of The Voiceless Drives: CGM 1SS RS Join Date: Feb 2009 Location: OC Cali Posts: 9,610 View My Garage	DAMN!!!! That sounds really good!!! __________________

08-24-2010, 06:35 PM	#23
KMPrenger Drives: 16 Camaro SS, 15 Colorado Join Date: May 2009 Location: Jefferson City, Missouri Posts: 13,967	Just got to give them a good listen and they sound great! I just love the sound those BBKs provide and yours is my favorite setup thus far. The only other one that makes me grin as much is the BBK + Pypes cat-back video, but only on start up and small revs....other than that, its just too much for me! So I noticed you removed your cold start and reving video. Are you planning on doing a new one? Cause I really enjoyed that video to! I'd like to keep a link of it on the sticky if it is ok with you, but just let me know. Are you still having to reset the CEL every once in awhile? __________________ 2016 Camaro 1SS - 8-speed - NPP - Black bowties 2010 Camaro 1LT V6 (Sold. I will miss her!)

06-12-2010, 02:49 PM	#16
darwin Drives: 1SS/RS 2010 Camaro Join Date: Jan 2010 Location: Cape May, NJ Posts: 57	i guess i will probably go with ceramic then. i was just gonna go with stainless steel. i will wait till you get your video up so i can listen to it. i think the corsa sounds the best for cat backs. i just got my car back from the shop so now i am ready to do things to it. some elderly guy hit me on my side a month ago.

06-13-2010, 07:13 PM	#18
darwin Drives: 1SS/RS 2010 Camaro Join Date: Jan 2010 Location: Cape May, NJ Posts: 57	sounds good to me, i am on this thread every day so i will be looking out for it.

08-25-2010, 12:03 AM	#25
usa1camaro1969 Back on the dino-juice Drives: '10 LS + a few more Join Date: May 2010 Location: Texas Posts: 1,641	What are you using to monitor the rear sensors and reset the CEL's? Let us know how the third non-fouler and mod works out. I really want these headers but really don't want to get forced into a tune yet.

08-25-2010, 12:47 AM	#26
PoorMansCamaro Drives: Really Slow Join Date: Apr 2010 Location: PA Posts: 57,201	OUR BEE, do you mind meeting me somewhere within the next day or two to read my o2 sensor with whatever it is your using? And if my CEL is on, maybe check to see if they are the same code as yours? __________________