Spoiler Options

[rtcat600man]

Something like this one ?

[VenomZ302]

Originally Posted by rtcat600man

Something like this one ?

In terms of the width, yes. In terms of the overall design, no. It just looks too... clunky... to me.

[Indpowr]

Here are a few shots of my ED Carbon Fiber Spoiler painted part of it.

[IMG][/IMG]



[IMG][/IMG]

[VenomZ302]

That does look awfully nice, Indpowr.

Freaking decisions...

[franknbeans]

Originally Posted by Genious

i haven't seen anyone with it either, thats why i want it. From the info i have gathered the center piece uses the original spoilers mount holes so no extra drilling has to be done. The 2 corner pieces are 3m tape but can be bolted in as well if you don't mind drilling. Even at constant high speeds the surface area is not big enough to catch enough wind to pry them loose, provided the surface was clean on application. barring some jerk purposely pulling them off they should be fine.

Sadly the entire thing is put on with 3m tape.

http://www.streetsceneeq.com/instruc.../950-70233.pdf

[55Designs]

guys hang tight because we will be introducing our spoiler by the end of next week if all goes well. I actually designed and built it all in house using clay modeling. My design looks awesome and doesnt look like an afterthought. I bought every single wing on the market for test analysis and couldnt settle for any of them.

We had to retool to make ours lighter and to eliminate the screws for the LT customers since most spoilers with holes don't line up perfect and nobody really wants to drill holes.

Photos will be posted in several sections once our sponsorship becomes active.

[55Designs]

Originally Posted by franknbeans

Sadly the entire thing is put on with 3m tape.

http://www.streetsceneeq.com/instruc.../950-70233.pdf

Proper 3M VHB is will never come off. BMW, Ferrari and many cars manufactures use this on their OEM spoilers. During a test 3 years ago a local shop installed a BMW M3 spoiler with VHB tape and attempted to pull it off even with a heat gun and nylon cord it distorted the metal on the trunk to the point it was trashed. Thats some serious adhesion if it can distort metal on a German car. I wish I had those photos still.

[Genious]

Is th 3m VHB the tape that comes with the streetscene spoiler or is it something else i should order. The instruction sheet doesn't say specifically

[camaro52010]

the 3 pieces look clunky and cumbersome to line up.
That's the old style from Chevelle and 3rd gen.

[nards444]

yeah to many just dont look like they are made for the car. I would really like the DALE JR if it was toned down a little, on top of it some of these are almost 500 bucks before paint, which is crazy

[VenomZ302]

This spoiler looks like it could be right, but I need more pictures to make my decision. Has anyone seen this one installed?
http://rpidesigns.com/shop/item.aspx?itemid=1831

This is the only installed image they have:


The picture looks like it's probably what I want, but I need to be sure before ordering...

[camaro52010]

I like this one with the fact that it wraps without 3 pieces so the issue becomes clearance to the fenders when you close the trunk and the gaskets compress? The exact thing that the 3 pieces addresses.

[

[rolnslo]

Originally Posted by VenomZ302

This spoiler looks like it could be right, but I need more pictures to make my decision. Has anyone seen this one installed?
http://rpidesigns.com/shop/item.aspx?itemid=1831

This is the only installed image they have:


The picture looks like it's probably what I want, but I need to be sure before ordering...

http://www.slponline.com/view_produc...1&BIG=100041-3

http://www.camaro5.com/forums/showth...498#post918498

[rolnslo]

Originally Posted by camaro52010

I like this one with the fact that it wraps without 3 pieces so the issue becomes clearance to the fenders when you close the trunk and the gaskets compress? The exact thing that the 3 pieces addresses.

[

This is why I like my spoiler from MPD1. There is a slight step up gap built into the spoiler for the sections that sit over the fenders. I could slam the trunk closed over and over and the spoiler won't hit the fender.