Elite Engineering Catch Can install - Page 5 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

10aSSee D · 09-06-2010, 08:11 PM

Quote:

Originally Posted by Darth_Emma

I dropped my car off at IPS Motorsports on Friday. They said they hope to have it finished by the end of the day today (Monday) and then dyno the car tomorrow. I should be able to get some video on the dyno and bring it home tomorrow if all goes as planned.

Hope you get your ride back on time. Post up when she's done.

Elite Engineering · 09-09-2010, 09:04 AM

Quote:

Originally Posted by Darth_Emma

I will tomorrow! My maggie and EE catch can are being installed right now.

Let us know what you think

Darth_Emma · 09-09-2010, 09:08 AM

Quote:

Originally Posted by Elite Engineering

Let us know what you think

I will, but I guess you should know that the tubing you provide is fine for a stock car, but not the right length for a car with a Maggie. The shop had to special order another piece of tubing to make it work. So, I have to wait an extra couple of days to get my car back. I'm hoping to get it today.

I know you can't anticipate every possible option when you package your catch cans, but I'm posting this info for those who may have blowers and want to use your catch can.

Elite Engineering · 09-09-2010, 09:51 AM

Quote:

Originally Posted by Darth_Emma

I will, but I guess you should know that the tubing you provide is fine for a stock car, but not the right length for a car with a Maggie. The shop had to special order another piece of tubing to make it work. So, I have to wait an extra couple of days to get my car back. I'm hoping to get it today.

I know you can't anticipate every possible option when you package your catch cans, but I'm posting this info for those who may have blowers and want to use your catch can.

Thanks for the information. It should be a standard 3/8" SAE30R7 available at any auto parts store.

mikeSS · 09-09-2010, 11:20 AM

Quote:

Originally Posted by Elite Engineering

Thanks for the information. It should be a standard 3/8" SAE30R7 available at any auto parts store.

hey elite, is there anyway i can buy from you using pay pal... ? i went to your site and its not pay pal....

10aSSee D · 09-09-2010, 05:48 PM

Quote:

Originally Posted by Darth_Emma

I will, but I guess you should know that the tubing you provide is fine for a stock car, but not the right length for a car with a Maggie. The shop had to special order another piece of tubing to make it work. So, I have to wait an extra couple of days to get my car back. I'm hoping to get it today.

I know you can't anticipate every possible option when you package your catch cans, but I'm posting this info for those who may have blowers and want to use your catch can.

Thanks for the hose info. Post up when you get it back and let us know the details. Thanks for your help.

Elite Engineering · 11-12-2010, 08:36 AM

Quote:

Originally Posted by Darth_Emma

I will tomorrow! My maggie and EE catch can are being installed right now.

How did the install go? Any problems?

TBone · 11-13-2010, 07:08 PM

I installed mine today. I got the blue one and it looks great.

Thanks,
T.

GJG · 11-13-2010, 07:14 PM

installed a Maggie and moved mine to the driver side

*mlee* · 11-13-2010, 07:15 PM

Be sure and put some blue loc tight on the 2 allen head screws that hold the can to the bracket. They tend to back out... I lost one... but picked up an exact replacement at Home Depot.

GJG · 11-13-2010, 07:20 PM

will do....thanks!!!

JHL88 · 11-14-2010, 08:46 AM

geeze... i thought my intake was easier to put on than my catch can... took more time anyway

10aSSee D · 11-14-2010, 09:47 AM

Quote:

Originally Posted by GJG

installed a Maggie and moved mine to the driver side

That looks really good!!! How did you mount it on the driver side? I would like to do mine the same way.

GJG · 11-14-2010, 10:57 AM

thanks!

i fabricated some 1/8" aluminum angle for a mounting bracket and used the original air box stud to mount it between the fender and CAI box.

fyi....when you bolt the can to the angle use 3 or 4 stainless washers on each bolt as standoffs between the can and the angle.

11-13-2010, 07:08 PM	#64
TBone Negative Camber Junkie Drives: 2010 1SS LS3/6MN ABM 1 of 23 Join Date: May 2009 Location: ChiTown, IL Posts: 1,824	I installed mine today. I got the blue one and it looks great. Thanks, T. __________________ "Horsepower is something that looks great in a Magazine article, but suspension is what actually gets you around the track fast.." Jack Olsen The drag strip is like sniffing glue, it's cheap, it's a decent buzz, it doesn't last long and they are all the same. Road racing is like China White Heroin, the buzz is stronger, the high lasts for hours, it's extremely addictive and they are all different. I can't wait for my next Track fix. DA HAWKS OWN DA CUP!!!!!

11-13-2010, 07:14 PM	#65
GJG Drives: 2SS Join Date: Apr 2009 Location: Beaumont, Tx Posts: 871	installed a Maggie and moved mine to the driver side __________________ Sleep well America.....my MARINE has your back......

11-13-2010, 07:15 PM	#66
mlee CamaroFans.com Drives: ZLE & ZR2 Join Date: Oct 2008 Location: Conroe, TX Posts: 38,058	Be sure and put some blue loc tight on the 2 allen head screws that hold the can to the bracket. They tend to back out... I lost one... but picked up an exact replacement at Home Depot. __________________

11-13-2010, 07:20 PM	#67
GJG Drives: 2SS Join Date: Apr 2009 Location: Beaumont, Tx Posts: 871	will do....thanks!!! __________________ Sleep well America.....my MARINE has your back......

11-14-2010, 08:46 AM	#68
JHL88 Drives: 02 z06 Join Date: Oct 2009 Location: Virginia/south carolina Posts: 416	geeze... i thought my intake was easier to put on than my catch can... took more time anyway __________________ 1997 RS wrecked 1998 Z28 sold 10 SS sold 2002 torch redc5z06 - sold :( '13 z71 4x4 - DD www.fquick.com/JHL88

11-14-2010, 10:57 AM	#70
GJG Drives: 2SS Join Date: Apr 2009 Location: Beaumont, Tx Posts: 871	thanks! i fabricated some 1/8" aluminum angle for a mounting bracket and used the original air box stud to mount it between the fender and CAI box. fyi....when you bolt the can to the angle use 3 or 4 stainless washers on each bolt as standoffs between the can and the angle. __________________ Sleep well America.....my MARINE has your back......

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Complete ******** install from a Novice	Susantroy1	Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum	63	07-31-2015 01:25 PM
My JL 12" and JL 250 amp install VIDEO AND PIX!	TAG UR IT	Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum	55	02-12-2011 01:03 AM
4.10 or 3.73 Gear & Install Kit Combo	Apex Paul	Transmission / Driveline	21	08-21-2010 01:55 PM
SW Ohio mod day #2	heinzd01	USA - Great Lakes	473	05-28-2010 11:41 AM
DIY : Install catback on 2010 Camaro SS	Nine Ball	Camaro DIY & HOW-TO instructions & discussions	3	08-09-2009 04:36 PM