![]() |
![]() |
#1 |
I have no life
Drives: 06' Subaru STI, ex-Camaro V6 LLT Join Date: Apr 2010
Location: Top Gear Test Track
Posts: 3,189
|
Injen, is this normal?
Hi guys,
I was painting my engine cover today, and I realized the Oil diffuser that came with the Injen seems to be leaking? There is no visible dripping... but it seems that it isn't completely sealed or something. Is anyone else having this problem? How should I solve this? =( In the image, look closely at the oil diffuser... it is covered in oil. If this is normal, I won't worry about it. ![]()
__________________
|
![]() |
![]() |
![]() |
#2 |
The Milano
Drives: 2017 Firefly ShipWorks Join Date: Jun 2010
Location: Chicagoland (Crown Point, IN)
Posts: 1,877
|
Mine had some oil around the bottom of the nipple going into the air intake. It was hard to see but I could feel it and wipe it off with my finger.
__________________
My first Love. She was called "Miss Carriage" (still cry when I think about her)
383, Muncie 4 speed, custom linkage mated to hurst short throw shifter. |
![]() |
![]() |
![]() |
#3 |
I have no life
Drives: 06' Subaru STI, ex-Camaro V6 LLT Join Date: Apr 2010
Location: Top Gear Test Track
Posts: 3,189
|
interesting... Do you have the Injen CAI as well? I am worried if this is normal or not for the Injen =p. I looked in the engine bay a bit closer now, and I realized it HAS dripped before... it left a drip mark near my front support beam.
__________________
|
![]() |
![]() |
![]() |
#4 |
The Milano
Drives: 2017 Firefly ShipWorks Join Date: Jun 2010
Location: Chicagoland (Crown Point, IN)
Posts: 1,877
|
Yep injen just like yours. I used liquid electric tape to seal min where it meats the intake. I must have missed a spot underneath where I could not see.
__________________
My first Love. She was called "Miss Carriage" (still cry when I think about her)
383, Muncie 4 speed, custom linkage mated to hurst short throw shifter. |
![]() |
![]() |
![]() |
#5 | |
![]() Drives: 2010 1LT RS Join Date: Jul 2010
Location: Arkansas
Posts: 51
|
Quote:
I've always had Injen products - but this just seems like crap. The whole product is quality except for this fitting - just a piece of rubber hose shoved in there ... doesn't lock in / seal / or anything. Mine doesn't even fit tight. Of course Injen didn't write back. Oh well. |
|
![]() |
![]() |
![]() |
#6 |
![]() Drives: '10 Camaro LS - M6 Join Date: Mar 2010
Location: Arlington, VA
Posts: 550
|
Does the new Injen short ram intake have the same problem?
Would a gasket sealant fix it? http://www.autozone.com/autozone/acc...er=526665_0_0_
__________________
|
![]() |
![]() |
![]() |
#7 |
B.O.D. 02/16/10
Drives: 2010 SGM Sp. Edition 2017 RS Conver Join Date: Jun 2010
Location: Albia,Iowa
Posts: 3,959
|
hey guys thinking of getting one of these very soon, other than this problem how do you like it performance wise? does it improve sound,deeper or higher?
|
![]() |
![]() |
![]() |
#8 | |
![]() Drives: 2010 1LT RS Join Date: Jul 2010
Location: Arkansas
Posts: 51
|
Quote:
I didn't notice any performance increase. The sound is awesome. My MPG went to crap. Babying the car around I still get crap mileage... but it sounds good. |
|
![]() |
![]() |
![]() |
#9 |
B.O.D. 02/16/10
Drives: 2010 SGM Sp. Edition 2017 RS Conver Join Date: Jun 2010
Location: Albia,Iowa
Posts: 3,959
|
|
![]() |
![]() |
![]() |
#10 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 16 Camaro SS, 15 Colorado Join Date: May 2009
Location: Jefferson City, Missouri
Posts: 13,949
|
Quote:
oh wells..good luck!
__________________
2016 Camaro 1SS - 8-speed - NPP - Black bowties
2010 Camaro 1LT V6 (Sold. I will miss her!) |
|
![]() |
![]() |
![]() |
#11 |
I have no life
Drives: 06' Subaru STI, ex-Camaro V6 LLT Join Date: Apr 2010
Location: Top Gear Test Track
Posts: 3,189
|
seriously guys? I call thread jacked >=( I was asking about the problem! No one ELSE has the problem except formare and 1naylor?
I supposed a sealant would fix it... but why fix something that is Injen's fault? I need to confirm if this is fine or not. If not, Injen will be hearing from me for sure.
__________________
|
![]() |
![]() |
![]() |
#12 |
![]() Drives: v6 manual n shit' Join Date: Sep 2010
Location: SoCal
Posts: 48
|
|
![]() |
![]() |
![]() |
#13 | |
![]() Drives: '10 Camaro LS - M6 Join Date: Mar 2010
Location: Arlington, VA
Posts: 550
|
Quote:
There is an Injen rep on the forum (username: Injen Technology - http://www.camaro5.com/forums/member.php?u=30298). Hopefully he/she will answer soon.
__________________
|
|
![]() |
![]() |
![]() |
#14 |
![]() Drives: 2010 1LT RS Join Date: Jul 2010
Location: Arkansas
Posts: 51
|
|
![]() |
![]() |
|
|
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Bypass valve on Injen? | Cro | Camaro V6 LLT Engine, Exhaust, and Bolt-Ons | 6 | 07-24-2013 11:54 AM |
v6john and/or Other Injen users... | jagan323 | Camaro V6 LLT Engine, Exhaust, and Bolt-Ons | 20 | 07-05-2010 07:52 PM |
Scrming's Airaid and Injen Dyno results... | scrming | Camaro V6 LLT Engine, Exhaust, and Bolt-Ons | 212 | 06-28-2010 03:28 PM |
Great Read and Info on Oil Weight | Banshee | Mechanical Maintenance: Break-in / Oil & Fluids / Servicing | 1 | 11-23-2009 09:03 PM |