Camaro 22's replica wheels - Page 9 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

svsv · 09-24-2010, 01:29 PM

Do the 22 inch wheels fit the V6 Camaro?

BFxenon.com · 09-24-2010, 02:05 PM

yes they do

Quote:

Originally Posted by svsv

Do the 22 inch wheels fit the V6 Camaro?

Blacky · 09-29-2010, 03:30 PM

Hi BF have an litte question, i have buy the wheels direkt from
Factory Reprodutions because they have made an really Good Shipping price. Now i have an Question about the radial runout of these wheels 3 from 4 Wheels are really horrible and in one wheel we must Put nearly 200 gramms Metall that the Balancer maschine shows or says "OK":( I cant understand this , the wheels are New out of teh Box not used and now this.
But the Problem is , i cant drife more than 130 km/h because from the radial or little egg formed Wheels the complete Car is vibrating and the Stering wheel is shaking really hard. To drife on the Autobahn i can forget and my wife now is angree to drife with me because drife with this wheels feels like drifing ian wasching maschine.

Is there an trick to become the wheels OK ? i will put litte Vids here so you can say what you think.
Factory Repro.. says i should go to an Hounter Balancer, but its hard to finde here in Germany, and i dont know if an Hounter Balancer become the wheels right so that i can Drife the Car to the Limit . What you think ?

I hope anybody can Help, love the Optic and Look of the Wehhls But the felling is Bad in the moment

BFxenon.com · 09-29-2010, 06:23 PM

Im not sure how they were shipped to you, but it is possible they were damaged in s'hipping. We typically ship on a pallet over seas for that reason. Did you test all the wheels? Is it more than 1? Front or Rear? Staggered setup?

You can maybe see if there is a wheel repair shop in your area that has any input for you? It wouldnt be worth sending back to the states for exchange...

Blacky · 09-30-2010, 12:25 AM

1 wheel is Ok, and 3 Wheels are bad, Have test them yes, have Videos from all the wheels here, its my Last option to let make an Wheel repair in an Wheel repair Shop, but from new Wheels i have not think this.
The Wheels comes here in the Orignal Karton Package, in 4 Pakets. te inside was good save the Wheels have had noc sratches or so.

BFxenon.com · 09-30-2010, 10:45 AM

After you put them on a Hunter machine and they are still the same you would need to contact FR to see mwhat the next step is. It is still possible for wheels to be damaged in shipping, with no scratches.

Quote:

Originally Posted by Blacky

1 wheel is Ok, and 3 Wheels are bad, Have test them yes, have Videos from all the wheels here, its my Last option to let make an Wheel repair in an Wheel repair Shop, but from new Wheels i have not think this.
The Wheels comes here in the Orignal Karton Package, in 4 Pakets. te inside was good save the Wheels have had noc sratches or so.

Blacky · 09-30-2010, 05:21 PM

You think rally an Hunter maschine can Fix this ??
never heard from this, but i have search in the internet and i must Drife any Km to the Next Shop with this maschine, so im must be sure .
I will not spend again and again monay in this. think you can understand.

But Thanky for your Help with the TIPs

mike.nite · 09-30-2010, 05:50 PM

Blacky, the same happened to me about 2 years ago. I recieved a set of wheels from oversea.

They were in perfect condition and absolut no visible defects. Turned out that one rim has a huge dent. It looked horrible on the balancing mashine (like yours!). I was lucky that this was only on a inner lip and didn't affect the ride. I can't feel it while driving.

It's hard to believe that this happened during shipping. If the karton boxes aren't destroyed it could be a production fault.

Geh doch trotzdem mal noch zu einem Felgendoktor, vieleicht hat der noch ein Trick auf Lager. Drück dir die Daumen!

Mike

ChevyRider · 10-01-2010, 05:04 PM

BFxenon,

Can u PM me a price for the 22" machined/black wheel with a red stripe (just like the one on the white camaro you posted).
I've been searching for the right wheel since April and I think the search is over, that wheel is absolutely sick!
Thanks

FiveO · 10-26-2010, 12:40 AM

DITTO!!!!!!

BFxenon, Can u PM me a price for the 22" machined/black wheel with a red stripe (just like the one on the white camaro you posted) as well!!! I think I may have to go with these. Can you please include the price with the tires? Thanks

BlaSSt Off · 10-26-2010, 01:44 AM

Another Bump for the 22" replicas. I love mine! I put General Exclaim UHP tires on mine for under $1000. They ride and handle great.

Rodzilla13 · 10-27-2010, 01:01 AM

Can you please PM me a price for the machined without the black? 9"s up front and 10"s in the rear. Could you post any pics of the machined without black?

Thank you.

BFxenon.com · 10-27-2010, 12:16 PM

Black/Machine is still out of stock. We are expecing them in middle of next month. I will let everyone know once they arrive!

Pricing can be found on our website. BFXauto.com

CoyoteRiverRacing · 10-28-2010, 11:06 AM

Did you guys ever get a 20X10 or 20X11 wheel?

thank you
Chet

09-24-2010, 01:29 PM	#113
svsv Drives: 2011 Hyundai Sonata 2.0 Turbo Join Date: Mar 2010 Location: brownsville texas Posts: 57	Do the 22 inch wheels fit the V6 Camaro? __________________ I want to narrow the bridge between my world of ideas and my world of reality...

09-29-2010, 03:30 PM	#115
Blacky Drives: Camaro 2010 Join Date: Jan 2009 Location: Germany Posts: 308	Hi BF have an litte question, i have buy the wheels direkt from Factory Reprodutions because they have made an really Good Shipping price. Now i have an Question about the radial runout of these wheels 3 from 4 Wheels are really horrible and in one wheel we must Put nearly 200 gramms Metall that the Balancer maschine shows or says "OK":( I cant understand this , the wheels are New out of teh Box not used and now this. But the Problem is , i cant drife more than 130 km/h because from the radial or little egg formed Wheels the complete Car is vibrating and the Stering wheel is shaking really hard. To drife on the Autobahn i can forget and my wife now is angree to drife with me because drife with this wheels feels like drifing ian wasching maschine. Is there an trick to become the wheels OK ? i will put litte Vids here so you can say what you think. Factory Repro.. says i should go to an Hounter Balancer, but its hard to finde here in Germany, and i dont know if an Hounter Balancer become the wheels right so that i can Drife the Car to the Limit . What you think ? I hope anybody can Help, love the Optic and Look of the Wehhls But the felling is Bad in the moment __________________

09-30-2010, 12:25 AM	#117
Blacky Drives: Camaro 2010 Join Date: Jan 2009 Location: Germany Posts: 308	1 wheel is Ok, and 3 Wheels are bad, Have test them yes, have Videos from all the wheels here, its my Last option to let make an Wheel repair in an Wheel repair Shop, but from new Wheels i have not think this. The Wheels comes here in the Orignal Karton Package, in 4 Pakets. te inside was good save the Wheels have had noc sratches or so. __________________

09-30-2010, 05:21 PM	#119
Blacky Drives: Camaro 2010 Join Date: Jan 2009 Location: Germany Posts: 308	You think rally an Hunter maschine can Fix this ?? never heard from this, but i have search in the internet and i must Drife any Km to the Next Shop with this maschine, so im must be sure . I will not spend again and again monay in this. think you can understand. But Thanky for your Help with the TIPs __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CAMARO WIKI	Tran	Wiki	67	11-27-2024 09:02 AM
New Camaro Exterior and Interior Stainless Steel Trim Parts from RPI Designs!	RPI Designs	Exterior Parts & Accessories	30	02-20-2013 04:23 PM
Gran Turismo 5... No Camaro?	5thGenOwner	5th Gen Camaro SS LS LT General Discussions	111	12-06-2011 11:06 AM

09-29-2010, 06:23 PM	#116
BFxenon.com Account Suspended Drives: Camaro Join Date: May 2009 Location: BFxenon.com Posts: 461	Im not sure how they were shipped to you, but it is possible they were damaged in s'hipping. We typically ship on a pallet over seas for that reason. Did you test all the wheels? Is it more than 1? Front or Rear? Staggered setup? You can maybe see if there is a wheel repair shop in your area that has any input for you? It wouldnt be worth sending back to the states for exchange...

09-30-2010, 05:50 PM	#120
mike.nite Drives: 2011 2SS L99, 2010 LT RS Join Date: Mar 2010 Location: NY (USA) ZH (Switzerland) Posts: 437	Blacky, the same happened to me about 2 years ago. I recieved a set of wheels from oversea. They were in perfect condition and absolut no visible defects. Turned out that one rim has a huge dent. It looked horrible on the balancing mashine (like yours!). I was lucky that this was only on a inner lip and didn't affect the ride. I can't feel it while driving. It's hard to believe that this happened during shipping. If the karton boxes aren't destroyed it could be a production fault. Geh doch trotzdem mal noch zu einem Felgendoktor, vieleicht hat der noch ein Trick auf Lager. Drück dir die Daumen! Mike

10-01-2010, 05:04 PM	#121
ChevyRider Drives: 2010 Camaro Join Date: Oct 2010 Location: USA Posts: 24	BFxenon, Can u PM me a price for the 22" machined/black wheel with a red stripe (just like the one on the white camaro you posted). I've been searching for the right wheel since April and I think the search is over, that wheel is absolutely sick! Thanks

10-26-2010, 12:40 AM	#122
FiveO Drives: 2011 Camaro SS 6speed Manual Join Date: Sep 2010 Location: Baton Rouge, LA Posts: 128 View My Garage	DITTO!!!!!! BFxenon, Can u PM me a price for the 22" machined/black wheel with a red stripe (just like the one on the white camaro you posted) as well!!! I think I may have to go with these. Can you please include the price with the tires? Thanks

10-26-2010, 01:44 AM	#123
BlaSSt Off Drives: 2SS/RS Join Date: May 2009 Location: Texas Posts: 586	Another Bump for the 22" replicas. I love mine! I put General Exclaim UHP tires on mine for under $1000. They ride and handle great.

10-27-2010, 01:01 AM	#124
Rodzilla13 Drives: 2010 2SS/RS L99 Silver Ice Metallic Join Date: Jun 2010 Location: San Diego Posts: 8	Can you please PM me a price for the machined without the black? 9"s up front and 10"s in the rear. Could you post any pics of the machined without black? Thank you.

10-27-2010, 12:16 PM	#125
BFxenon.com Account Suspended Drives: Camaro Join Date: May 2009 Location: BFxenon.com Posts: 461	Black/Machine is still out of stock. We are expecing them in middle of next month. I will let everyone know once they arrive! Pricing can be found on our website. BFXauto.com

10-28-2010, 11:06 AM	#126
CoyoteRiverRacing Drives: 2010 Pace Car Join Date: May 2010 Location: Tucson, Arizona Posts: 87	Did you guys ever get a 20X10 or 20X11 wheel? thank you Chet