Rear Diffuser removal guide? - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

2SSRS@Gen5diy · 09-30-2010, 11:49 PM

Quote:

Originally Posted by daphatgrant

Keep me updated as this may be the reason I am taking mine off

.

2nd Diffuser - Part # 92218169 - $65

Tips - Magnaflow 35169 Stainless Steel dual out - $130

I got a second set of tips and am going that way Will have a pic up in a day or 3.LOL

RipperFox · 10-01-2010, 12:10 AM

The ground effects intallation guide has pics and description in it. I have it. I'm at work at the moment and cant post it. You could search for it. I got it off of here.

TaylorRyanSS · 10-01-2010, 12:14 AM

Quote:

Originally Posted by brantley847

I am sure I am in the minority, but I actually like the diffuser with its factory color. I actually think it even looks good with the lighter tone vehicles...obviously with my IBM or black it's hardly noticable.

They look better unpainted imo When they are body colored it makes the back end look like a bubble butt lol

RipperFox · 10-01-2010, 12:19 AM

http://www.camaro5.com/forums/attach...5&d=1262884735

GFX instructions. Acrobat required.

2SSRS@Gen5diy · 10-01-2010, 12:24 AM

Quote:

Originally Posted by TaylorRyan74

They look better unpainted imo When they are body colored it makes the back end look like a bubble butt lol

Well If you guys have a 100K to 200K we can keep it the same unpainted color it is now, Or after the mod's are done to it we can paint it flat blk for $20 To $40.

ssmike · 10-01-2010, 10:20 AM

Quote:

Originally Posted by 2SSRS

I got a second set of tips and am going that way Will have a pic up in a day or 3.LOL

I would like to do the dual tips on each side also. Please show us when you're done and post a DIY if possible! Thanks!

2SSRS@Gen5diy · 10-01-2010, 11:26 AM

Will do have one side cut now and reshaping it as soon as i like it i will start a DYI on it.

jlpearl · 10-20-2010, 11:46 AM

I tried to get the diffuser off last night. I removed the 7mm screws and pulled quite hard on the diffuser but the top would not separate from the rear bumper cover. Can someone provide the angle/direction and location that they are pulling from. It seems that I should just pull straight back from the bumper cover, but I had no luck. I am in NH and the bumper was in a shop at around 60*. Maybe a warmer setting would help but IDK?

10-01-2010, 12:10 AM	#16
RipperFox Grrr!!! Drives: BLK/IOM '11 2SS/RS Join Date: Jul 2010 Location: OK Posts: 380 View My Garage	The ground effects intallation guide has pics and description in it. I have it. I'm at work at the moment and cant post it. You could search for it. I got it off of here. __________________ Rules for ordering a car. 1. Dealers are liars 2. Buy off the lot 3. See rule #1

10-01-2010, 12:19 AM	#18
RipperFox Grrr!!! Drives: BLK/IOM '11 2SS/RS Join Date: Jul 2010 Location: OK Posts: 380 View My Garage	http://www.camaro5.com/forums/attach...5&d=1262884735 GFX instructions. Acrobat required. __________________ Rules for ordering a car. 1. Dealers are liars 2. Buy off the lot 3. See rule #1

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
5th Gen Suspension -- The Book	JusticePete	Suspension / Brakes / Chassis	151	05-07-2015 06:52 PM
** Rear Spoiler and Rear Diffuser Now On Sale ***	SicMSP	Exterior Parts & Accessories	9	10-20-2010 05:13 PM
NEW GFX front and Rear diffuser**SOLD**	Z2869	Exterior Parts & Accessories	15	09-21-2010 04:52 PM
Removal of rear bumper	khislop007	Cosmetics and Lighting Modification Discussions	16	08-09-2010 04:52 PM
UPCOMING CAMARO IMPORTANT DATES	CamaroScotty	5th Gen Camaro SS LS LT General Discussions	125	01-11-2009 01:31 AM

10-01-2010, 11:26 AM	#21
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,728 View My Garage	Will do have one side cut now and reshaping it as soon as i like it i will start a DYI on it.

10-20-2010, 11:46 AM	#22
jlpearl Performance-Dyno.com Drives: 2013 Camaro ZL1 Join Date: Mar 2010 Location: Loudon, NH Posts: 57	I tried to get the diffuser off last night. I removed the 7mm screws and pulled quite hard on the diffuser but the top would not separate from the rear bumper cover. Can someone provide the angle/direction and location that they are pulling from. It seems that I should just pull straight back from the bumper cover, but I had no luck. I am in NH and the bumper was in a shop at around 60*. Maybe a warmer setting would help but IDK?