About to purchase MRT 2.0 - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

scrming · 10-05-2010, 11:19 AM

Quote:

Originally Posted by 2010CamaroRS

its baked on...not comin off...i used a lot of diff products to try and remove it...maybe a brillo pad...but that shit can scratch the finish too so i didnt bother...

so basically your friend let the soot bake on the tip, for who know s how long and now is having a hard time getting it off.. that is certainly a very different picture than what you painted at the start...

Wonder if if something like Easy Off Oven Cleaner would work...

CamaroDreams07 · 10-05-2010, 11:42 AM

Lol your friend let it bake on and then you're claiming that's MRTs fault? If you let bird crap bake onto your paint and it etches is that a GM paint defect? Exhaust tips build up soot- all of them. If you just wipe them out with a little soapy water each time you're finished washing the car it comes right off.

Worst arguments I've heard since Tradosaurus was here.

If you actually want to fix it rather than complain, use some 0000 steel wool on the insides with some Adam's APC. Follow that up with a good metal polish, I like Mother's.

Giaquinto1989 · 10-05-2010, 11:58 AM

Quote:

Originally Posted by scrming

Just simply install the MRT and enjoy!! No need for tune...

Alright, great... and this system is 100% legal correct? all the have to do is cut out the mufflers? The cats are still there?

I also see this at the MRT website.... "This MRT Version 2.0 Axle-Back Exhaust (91A177) will fit the 2010 Camaro V6, RS & LS Models. MRT also offers a 2010 Camaro SS Axle-Back Exhaust System."

I know I might sound really paranoid but it is going to fit my 1LT right? Just covering all my bases before I order...

scrming · 10-05-2010, 12:09 PM

Quote:

Originally Posted by Giaquinto1989

Alright, great... and this system is 100% legal correct? all the have to do is cut out the mufflers? The cats are still there?

I also see this at the MRT website.... "This MRT Version 2.0 Axle-Back Exhaust (91A177) will fit the 2010 Camaro V6, RS & LS Models. MRT also offers a 2010 Camaro SS Axle-Back Exhaust System."

I know I might sound really paranoid but it is going to fit my 1LT right? Just covering all my bases before I order...

Yes, the cats are left intact.. you simply cut out the stock mufflers... And yes, they will fit your 1LT....

tlubeskie · 10-05-2010, 12:12 PM

2.0 is great! I have loads of folks commenting on the mean V6 sound. PS, the 2.0's sound a little deeper after I installed my K&N CAI two weeks ago! Scrming, did you notice a different tone when you installed your Injen CAI?

jagan323 · 10-05-2010, 02:06 PM

Quote:

Originally Posted by 2010CamaroRS

its baked on...not comin off...i used a lot of diff products to try and remove it...maybe a brillo pad...but that shit can scratch the finish too so i didnt bother...

Yeah, sorry, I have to say, your friend screwed up his own tips then. I had soot on my stock exhaust, i have soot on my new exhaust tips too. Just wash it every or every 2 car washes, and it will come off. I use a soft brush for my tips, and Adam's All purpose cleaner. Looks beautiful everytime =)

cnrad · 10-05-2010, 02:14 PM

Quote:

Originally Posted by scrming

Yes, the cats are left intact.. you simply cut out the stock mufflers... And yes, they will fit your 1LT....

Scrming, do you know if the v 1.0s have any problem passing smog tests?

jagan323 · 10-05-2010, 02:43 PM

shouldn't have any effect on smog tests... most of your smog is handled by your cats

dcamarom · 10-05-2010, 03:15 PM

Does anyone have a video of V 2.0 with an airaid?

cnrad · 10-05-2010, 03:16 PM

Quote:

Originally Posted by jagan323

shouldn't have any effect on smog tests... most of your smog is handled by your cats

oh alright thanks

just wanted to make sure.

Blade · 10-05-2010, 03:17 PM

OH man.....the name tradosaurus made it into this thread

So is "Pulling a Tradosaurus" an official camaro5 forum term now, whenever someone says something absolutely outlandish?

Majic · 10-05-2010, 03:42 PM

I just installed the MRT V2's today. Took less than an hour. Sound great...but no, I hve no video camera,,,sorry. They are quiet at highway speeds but sounds like an Indy car when at WOT.

Rick

Giaquinto1989 · 10-06-2010, 10:11 AM

Does anybody know where I can find instructions to install these? I am pretty sure my uncle can do this job if its easy... im not looking to pay some shop 99 an hour for no reason

scrming · 10-06-2010, 11:05 AM

Quote:

Originally Posted by Giaquinto1989

Does anybody know where I can find instructions to install these? I am pretty sure my uncle can do this job if its easy... im not looking to pay some shop 99 an hour for no reason

Here you go....

http://www.johnnystacks.com/gallery/...ck+Exhaust.pdf

10-05-2010, 11:42 AM	#16
CamaroDreams07 Drives: Slow V6 Join Date: Jun 2009 Location: East Lansing, MI Posts: 9,361 View My Garage	Lol your friend let it bake on and then you're claiming that's MRTs fault? If you let bird crap bake onto your paint and it etches is that a GM paint defect? Exhaust tips build up soot- all of them. If you just wipe them out with a little soapy water each time you're finished washing the car it comes right off. Worst arguments I've heard since Tradosaurus was here. If you actually want to fix it rather than complain, use some 0000 steel wool on the insides with some Adam's APC. Follow that up with a good metal polish, I like Mother's. __________________ [B]

10-05-2010, 02:43 PM	#22
jagan323 I have no life Drives: 06' Subaru STI, ex-Camaro V6 LLT Join Date: Apr 2010 Location: Top Gear Test Track Posts: 3,189	shouldn't have any effect on smog tests... most of your smog is handled by your cats __________________ List of Camaro DIY The Blog

10-05-2010, 03:17 PM	#25
Blade Drives: 2016 Camaro 2SS BVM Join Date: Dec 2009 Location: Charlotte Posts: 4,689 View My Garage	OH man.....the name tradosaurus made it into this thread So is "Pulling a Tradosaurus" an official camaro5 forum term now, whenever someone says something absolutely outlandish? __________________ Formerly owner of: 2012 2SS/RS Build Thread - Totaled by red light runner 2010 LT/RS Build Thread - Traded in for 2012 2SS 2007 Acura TSX 1992 Oldsmobile Achieva V6 1992 Mercury Sable

10-05-2010, 03:42 PM	#26
Majic Majic Drives: 2018 1LT Black...V6 Join Date: Aug 2010 Location: Crestview, Florida Posts: 1,596 View My Garage	Installed I just installed the MRT V2's today. Took less than an hour. Sound great...but no, I hve no video camera,,,sorry. They are quiet at highway speeds but sounds like an Indy car when at WOT. Rick

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
So... MRT Exhaust Version 2.0	scrming	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	1121	05-24-2013 05:25 PM
Where to buy MRT 2.0	Gman8	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	2	06-30-2010 12:01 PM
MRT 1.0, 2.0 or Solo...that is the question	TJ91	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	21	04-11-2010 04:06 PM
TRADE: Axle back MRT 1.0 for MRT 2.0	tradosaurus	V8 - Engine, Exhaust, Bolt-Ons, Tuning Equipment	4	03-29-2010 10:00 AM
Why use premium gas?	avro206	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	81	01-11-2010 03:38 PM

10-05-2010, 12:12 PM	#19
tlubeskie Drives: 2010 SS Silver w/Black Stripes Join Date: Jul 2009 Location: Dallas Posts: 18	2.0 is great! I have loads of folks commenting on the mean V6 sound. PS, the 2.0's sound a little deeper after I installed my K&N CAI two weeks ago! Scrming, did you notice a different tone when you installed your Injen CAI?

10-05-2010, 03:15 PM	#23
dcamarom SoCal Family Member Drives: 2010 CGM Camaro 2LT/RS Join Date: Apr 2010 Location: Moore, Ok Posts: 212 View My Garage	Does anyone have a video of V 2.0 with an airaid?

10-06-2010, 10:11 AM	#27
Giaquinto1989 Drives: 2010 Camaro 1LT Join Date: Mar 2010 Location: New Jersey Posts: 40	Does anybody know where I can find instructions to install these? I am pretty sure my uncle can do this job if its easy... im not looking to pay some shop 99 an hour for no reason