DIY: Installing steering wheel audio and phone controls on Camaro !

[y2k king]

Originally Posted by thiggin2

Well then thats a good deal you got then . But most dealers will charge a min of 1 hr to program a module and the $50. So that could be around $150 just to program.

i know none of you live around here, but the dealer is register chevy in brooksville fl.

[LadyT_SS]

are there any chevy dealers in San Antonio or Austin that have done this?

[jeepguy_1980]

Originally Posted by LadyT_SS

are there any chevy dealers in San Antonio or Austin that have done this?

Here is the list.

Not many people have contributed, so it's not very comprehensive.

[y2k king]

Originally Posted by LadyT_SS

are there any chevy dealers in San Antonio or Austin that have done this?

i was the first one done at my dealer. i took the bulletin # with me. they looked it up and followed the instructions.

[LadyT_SS]

Originally Posted by y2k king

i was the first one done at my dealer. i took the bulletin # with me. they looked it up and followed the instructions.

Did you buy your car in San Antonio?

[y2k king]

Originally Posted by LadyT_SS

Did you buy your car in San Antonio?

no, in dade city fl.
it shouldn't matter where the dealer is, they'll have at least one tech on board that does uploads and flashes. they connect to gm and upload your car.

[slick rick]

Originally Posted by LadyT_SS

are there any chevy dealers in San Antonio or Austin that have done this?

The only confirmed dealers in Texas (as reported by other forums members) are

http://www.camaro5.com/forums/showpo...&postcount=335
http://www.camaro5.com/forums/showpo...7&postcount=14

* Friendly Chevrolet - Dallas, TX ($243)
* Allen Samuels - Waco, TX ($50.93 out the door)
* Rudolph Chevrolet - El Paso, TX (paid $141 out the door to get both PDIM, and steering wheel controls programmed)

[Daniel92]

my parents baught me a 2010 camaro ls
is there anyway i can do this modification? or is it only for the 1ss?

[ShadoChaser]

Originally Posted by Daniel92

my parents baught me a 2010 camaro ls
is there anyway i can do this modification? or is it only for the 1ss?

Yes, this can be done on the LS, I know as I have done it to mine!

[Daniel92]

how much was it?
and i went to my local dealer and they said i would need a new moduale and all this crap
can you let me know what i need to tell them

[slick rick]

Originally Posted by Daniel92

how much was it?
and i went to my local dealer and they said i would need a new moduale and all this crap
can you let me know what i need to tell them

You need the switch and harness. Look at the first post of the thread for the part numbers. Then the dealer needs to recalibrate the BCM to "activate" the switch.

[Daniel92]

or what print out from here can?

[Daniel92]

Originally Posted by slick rick

You need the switch and harness. Look at the first post of the thread for the part numbers. Then the dealer needs to recalibrate the BCM to "activate" the switch.

and this works on the ls right?

[slick rick]

Originally Posted by Daniel92

and this works on the ls right?

Yes

http://www.camaro5.com/forums/showpo...&postcount=122
http://www.camaro5.com/forums/showpo...&postcount=296