Big Flow Exhaust LT Headers.... Anyone running these yet? - Page 8 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

camarohead · 12-30-2010, 05:53 PM

Here is the dyno sheet.

plumber84 · 12-30-2010, 06:02 PM

Quote:

Originally Posted by mikeSS

i will sell you my GMPP street mufflers, for a very good price. deep and non- harsh sound. let me know

Used parts on my new 2011 Camaro, no way.

But thanks anyway.

plumber84 · 12-30-2010, 06:09 PM

http://www.vararam.com/camaro-ramair-unit2.htm

Is anyone using the Vararam air intake? If so, how do you like it and did you dyno it?

mikeSS · 12-30-2010, 06:51 PM

kind of surprised how quiet

camarohead · 12-30-2010, 07:16 PM

Quote:

Originally Posted by mikeSS

kind of surprised how quiet

well we all know how video does not do it justice. wanted no drone and be neighborhood friendly. its the perfect combo for me. believe me, its not quiet.

mikeSS · 12-30-2010, 07:19 PM

Quote:

Originally Posted by camarohead

well we all know how video does not do it justice. wanted no drone and be neighborhood friendly. its the perfect combo for me. believe me, its not quiet.

i believe you, headers with no cats, have to be loud some how. what RPM were you reving to

tonystark · 12-30-2010, 10:52 PM

Quote:

Originally Posted by camarohead

Here is the dyno sheet.

Darn good HP #'s!!!! Sounds good tooooo!

*mlee* · 12-31-2010, 07:00 PM

Quote:

Originally Posted by BowenSS1

Sound clip of idle please!!!!!!!
Debating on these was told by A.R.D sound
like arh and kooks......

You're really not going to be able to tell the difference in sound... The Axle back part will determine that...

Quote:

Originally Posted by tonystark

Darn good HP #'s!!!! Sounds good tooooo!

+1 and Daaayum they look sweet too...

tonystark · 01-03-2011, 08:47 PM

Where are those dyno results and install pics? Did you keep your stock mufflers?

tonystark · 01-03-2011, 09:47 PM

Found them!

Quote:

Originally Posted by camarohead

Here is the dyno sheet.

plumber84 · 01-05-2011, 09:21 AM

Headers arrived 1/3/11

I visually inspected them and I can see where the bending tool indented the piping a little. Plus there is a little grit (looks like fine sand under the finish) here and there near the welds. Is this normal for stainless steel?

tonystark · 01-05-2011, 04:51 PM

From my "very little" welding experience I know that when your welding something and it is on a steel welding table that is grounded if any part of the object is not grounded good it will spark between the table and the object causing that small spark burn mark or sand grit type imperfection that looks like slag but its not. Its pretty normal for hand made stuff!

plumber84 · 01-06-2011, 04:05 PM

I took some pictures of the inside of my new headers. Also, tried to get a picture of the outside "sand pimples" They are just under the flash reflection in the last picture.
Also, a picture of the inside of the cat.

I tried to upload pictures but it said I did not have a "security token"

How do I get one???

I got it. I could only upload 2 at a time. It did not like uploading 6 at a time.

xxlbeerz · 01-06-2011, 05:06 PM

Push manage attachments here, or upload to photobucket and link.

12-30-2010, 05:53 PM	#99
camarohead Drives: 2010 ss rs ls3 red-white rallys Join Date: Oct 2008 Location: Mississippi Posts: 729	Here is the dyno sheet. Attached Images __________________ eps cam 226/234 lsa 113+2, bfe 1 7/8 headers, rotofab cai, katech oil pump, 444 rwhp, 411 rwtq, eps tune, Blanchard performance install

12-30-2010, 06:09 PM	#101
plumber84 Duke Drives: Millennium Falcon Join Date: Nov 2010 Location: NJ Posts: 116	Vararam Air Intake http://www.vararam.com/camaro-ramair-unit2.htm Is anyone using the Vararam air intake? If so, how do you like it and did you dyno it?

01-03-2011, 08:47 PM	#107
tonystark Drives: 2010 Camaro SS Join Date: Oct 2010 Location: Houston Posts: 52	pics Where are those dyno results and install pics? Did you keep your stock mufflers?

01-05-2011, 09:21 AM	#109
plumber84 Duke Drives: Millennium Falcon Join Date: Nov 2010 Location: NJ Posts: 116	BFE Headers Headers arrived 1/3/11 I visually inspected them and I can see where the bending tool indented the piping a little. Plus there is a little grit (looks like fine sand under the finish) here and there near the welds. Is this normal for stainless steel? Last edited by plumber84; 01-05-2011 at 10:19 AM.

01-06-2011, 04:05 PM	#111
plumber84 Duke Drives: Millennium Falcon Join Date: Nov 2010 Location: NJ Posts: 116	BFE Headers I took some pictures of the inside of my new headers. Also, tried to get a picture of the outside "sand pimples" They are just under the flash reflection in the last picture. Also, a picture of the inside of the cat. I tried to upload pictures but it said I did not have a "security token" How do I get one??? I got it. I could only upload 2 at a time. It did not like uploading 6 at a time. Attached Images Last edited by plumber84; 01-06-2011 at 09:57 PM.

12-30-2010, 06:51 PM	#102
mikeSS Drives: 2015 c7 Join Date: Nov 2009 Location: MI Posts: 7,462	kind of surprised how quiet

01-05-2011, 04:51 PM	#110
tonystark Drives: 2010 Camaro SS Join Date: Oct 2010 Location: Houston Posts: 52	From my "very little" welding experience I know that when your welding something and it is on a steel welding table that is grounded if any part of the object is not grounded good it will spark between the table and the object causing that small spark burn mark or sand grit type imperfection that looks like slag but its not. Its pretty normal for hand made stuff!

01-06-2011, 05:06 PM	#112
xxlbeerz Drives: 2010 Black on Black Join Date: Oct 2010 Location: Houston, TX Posts: 533	Push manage attachments here, or upload to photobucket and link.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Kooks LT 1 7/8" headers, no cats, Doug Thorley Catback Exhaust Video Clip!	Captain McFunk	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	8	09-20-2010 04:54 PM
ARH Headers + Corsa Catback vs. ARH Full Header-back Exhaust	RedJewel2SS	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	11	06-17-2010 03:46 PM
LT Headers + Cat Back Exhaust	SamSS	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	5	02-15-2010 08:00 PM
My SS is at Kook's right now getting headers and high flow race exhaust and X pipe	Badger	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	83	06-30-2009 01:22 PM