Front License Plate Bracket Mod. Texas - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

CYBER69 · 01-05-2011, 10:56 PM

Couldn't you use a couple of good Magnets hidden in the lower grille?

overhaulengines · 01-06-2011, 09:09 AM

Quote:

Originally Posted by CYBER69

Couldn't you use a couple of good Magnets hidden in the lower grille?

Hi. Well there are many things I could have used. But what I did use is what I had just sitting there. They work perfect for me. Have u tried magnets? Please explain how this would work for us? Were do u get ur magnets from? Thx for ur input

CYBER69 · 01-06-2011, 10:10 AM

Haven't tried anything yet... just strolled across this thread, and thought ... Magnets. I will try it out in the future and let you know how it works... probably going to pick up at a industrial supply store.

KidKilowatt · 03-26-2011, 12:32 PM

Are the brackets attached to the grill?? Or are they just sitting in there?

overhaulengines · 03-26-2011, 12:37 PM

Quote:

Originally Posted by KidKilowatt

Are the brackets attached to the grill?? Or are they just sitting in there?

hello, i superglued the brackets i made to the back of the grill, that way i could easily remove the plate (for pics or shows) and reinstall right away. i took it off the other day for pics and put it right back on when i was done. worked perfect.

lupe

KidKilowatt · 03-26-2011, 02:04 PM

Quote:

Originally Posted by overhaulengines

hello, i superglued the brackets i made to the back of the grill, that way i could easily remove the plate (for pics or shows) and reinstall right away. i took it off the other day for pics and put it right back on when i was done. worked perfect.

lupe

Thanks,

I have an idea for a variation of your mod, from the pic, I wasn't sure how you were holding the plates on. Thanks for the help.
AL

jagan323 · 03-26-2011, 04:05 PM

you guys are lucky you can bend your plates. It's illegal to bend plates where I live =( 600 dollar fine if u cut or bend the plate. Since it legally belongs to the insurance company =(

Cool mod though

overhaulengines · 03-26-2011, 09:45 PM

Quote:

Originally Posted by jagan323

you guys are lucky you can bend your plates. It's illegal to bend plates where I live =( 600 dollar fine if u cut or bend the plate. Since it legally belongs to the insurance company =(

Cool mod though

i hope it not illegal here

jmhenry5150 · 03-27-2011, 06:37 PM

Quote:

Originally Posted by overhaulengines

i hope it not illegal here

My neighbor is a police office - specifically traffic duty - and he helped me with my mod

km9v · 04-08-2011, 04:14 PM

I use toggle bolts to hold the factory bracket in place:

(not my pic)

http://www.camaro5.com/forums/showthread.php?t=73549

overhaulengines · 04-08-2011, 07:24 PM

Now that is smooth. I like it

Lupe

ThePagelJrs · 04-21-2011, 11:49 AM

Looks great Lupe!

I removed my plate a few weeks ago but have been worried about the Houston cops getting me for it. I think I'll follow your lead with the brackets.

Thanks for posting!
Phillip

Big J · 04-25-2011, 09:40 PM

What size are the holes left behind so i can go buy some plugs.

overhaulengines · 04-25-2011, 10:11 PM

Quote:

Originally Posted by Big J

What size are the holes left behind so i can go buy some plugs.

hello bro, just trim retainers, i got them from pepboys., i went to their website, but could not find them, found them on autozones website
http://www.autozone.com/autozone/acc...uestid=1467877 the holes from the rivets are probably a little smaller than a 1/4

lupe

01-05-2011, 10:56 PM	#15
CYBER69 NEMESIS (NEMI-"SS") Drives: 2011 2SS-LS3, BLACK W/CYBER STRIPES Join Date: Nov 2010 Location: SAN DIEGO Posts: 144	Magnets? Couldn't you use a couple of good Magnets hidden in the lower grille? __________________ 1969 RS/SS Lemans Blue 396-350HP Convertible - Orig. Owner and 2011 RS/SS Black/Black Coupe - PFADT Stage-II, CAI, Richmond 4:33's, Barton Flat Stick-Short Throw, KOOK's ceramic LT's, Comp Stage II Cam, QuickTime cut-outs, Ryne Cunningham Custom Tune, Flowmaster, Heritage Grille, Eric Vaughn "widened" wheels w/ 315 Dunlops, MPD1 R.Spoiler & Dave Kahn "Buried" Cyber Grey Metallic Stripes.... 593HP / 517RWHP. [SIGPIC][/SIGPIC]

01-06-2011, 10:10 AM	#17
CYBER69 NEMESIS (NEMI-"SS") Drives: 2011 2SS-LS3, BLACK W/CYBER STRIPES Join Date: Nov 2010 Location: SAN DIEGO Posts: 144	Haven't tried anything yet... just strolled across this thread, and thought ... Magnets. I will try it out in the future and let you know how it works... probably going to pick up at a industrial supply store. __________________ 1969 RS/SS Lemans Blue 396-350HP Convertible - Orig. Owner and 2011 RS/SS Black/Black Coupe - PFADT Stage-II, CAI, Richmond 4:33's, Barton Flat Stick-Short Throw, KOOK's ceramic LT's, Comp Stage II Cam, QuickTime cut-outs, Ryne Cunningham Custom Tune, Flowmaster, Heritage Grille, Eric Vaughn "widened" wheels w/ 315 Dunlops, MPD1 R.Spoiler & Dave Kahn "Buried" Cyber Grey Metallic Stripes.... 593HP / 517RWHP. [SIGPIC][/SIGPIC]

03-26-2011, 04:05 PM	#21
jagan323 I have no life Drives: 06' Subaru STI, ex-Camaro V6 LLT Join Date: Apr 2010 Location: Top Gear Test Track Posts: 3,189	you guys are lucky you can bend your plates. It's illegal to bend plates where I live =( 600 dollar fine if u cut or bend the plate. Since it legally belongs to the insurance company =( Cool mod though __________________ List of Camaro DIY The Blog

04-25-2011, 09:40 PM	#27
Big J Drives: 2010 Camaro 2ss/rs ls3 Join Date: Aug 2010 Location: Northern Maine Posts: 203	What size are the holes left behind so i can go buy some plugs. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New! Retractable Front License Plate Frame/Holder! Hide your front license plate!	RPI Designs	Exterior Parts & Accessories	9	01-05-2016 11:06 AM
Swift Motor Sport Front License Plate Frame Install Explained	Xmicro_SS	Camaro DIY & HOW-TO instructions & discussions	44	07-06-2012 11:31 PM
Eradication of Front License Plate Requirement in Texas	USNA15	USA - Texas	6	04-20-2010 06:38 PM
Front License Plate Bracket	blackZbandit	5th Gen Camaro SS LS LT General Discussions	76	08-17-2009 06:51 PM
SB561 Repeal of front license plate law in Texas	OSU Cowboy	USA - Texas	25	06-17-2009 12:57 PM

03-26-2011, 12:32 PM	#18
KidKilowatt Drives: 2011 Camaro 2LT RS Join Date: Mar 2011 Location: Race City, NC Posts: 502	Are the brackets attached to the grill?? Or are they just sitting in there?

04-08-2011, 04:14 PM	#24
km9v Drives: 2011 Camaro SS/RS M6 Join Date: Oct 2010 Location: Beaumont, TX Posts: 421	I use toggle bolts to hold the factory bracket in place: (not my pic) http://www.camaro5.com/forums/showthread.php?t=73549

04-08-2011, 07:24 PM	#25
overhaulengines Drives: Red 2SS/RS M6 Join Date: Apr 2010 Location: San Antonio, Texas Posts: 6,207	Now that is smooth. I like it Lupe

04-21-2011, 11:49 AM	#26
ThePagelJrs Drives: 2010 Camaro 2SS/RS black/inferno Join Date: Mar 2011 Location: Houston Posts: 12 View My Garage	Looks great Lupe! I removed my plate a few weeks ago but have been worried about the Houston cops getting me for it. I think I'll follow your lead with the brackets. Thanks for posting! Phillip