CarID Carbon Fiber Interior Trim Kit - Page 5 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

CatiaJockey · 01-17-2011, 06:03 PM

Thanks, glad to hear it, its an awesome kit.

TaylorRyanSS · 01-17-2011, 06:05 PM

Quote:

Originally Posted by CatiaJockey

Thanks, glad to hear it, its an awesome kit.

Yeah, I would love to have actual replacements parts in carbon fiber but they are so expensive.

CatiaJockey · 01-17-2011, 06:07 PM

Quote:

Originally Posted by TaylorRyanSS

Yeah, I would love to have actual replacements parts in carbon fiber but they are so expensive.

Agreed, this kit is as close as I'll get.

SSMOKINHOT · 01-17-2011, 10:33 PM

I have the real red and black (RRBCF) CF from Car id ....it is black carbon fiber and red kevlar. The colors match the RJT perfectly!!!

SummoneR · 01-18-2011, 03:18 AM

HALFFAST
The blue looks dark, how close is it really to the Aqua Blue Metallic?

Tom D · 01-23-2011, 01:09 AM

This just convinced me. I will be getting this kit real soon.

Quote:

Originally Posted by SSMOKINHOT

I have the real red and black (RRBCF) CF from Car id ....it is black carbon fiber and red kevlar. The colors match the RJT perfectly!!!

TheColorBlack · 01-23-2011, 02:15 AM

Am I the only one not diggin the stickers.

Seriously...if you guys like carbon fiber so much...why not take the trims out and do a carbon fiber wrap.

All you need is a heat gun

TaylorRyanSS · 01-23-2011, 02:34 AM

Quote:

Originally Posted by TheColorBlack

Am I the only one not diggin the stickers.

Seriously...if you guys like carbon fiber so much...why not take the trims out and do a carbon fiber wrap.

All you need is a heat gun

These are real carbon fiber overlays... a carbon fiber wrap would be just using vinyl. The 3M Di Noc vinyl looks really good, but these "stickers" are actual carbon fiber with an adhesive backing.

SSMOKINHOT · 01-23-2011, 08:16 AM

Quote:

Originally Posted by Tom D

This just convinced me. I will be getting this kit real soon.

Glad I could convince you!!!

Quote:

Originally Posted by TaylorRyanSS

These are real carbon fiber overlays... a carbon fiber wrap would be just using vinyl. The 3M Di Noc vinyl looks really good, but these "stickers" are actual carbon fiber with an adhesive backing.

Right, they are real carbon fiber overlays, not some cheesy sticker! And they look FANTASTIC!! Everyone who sees mine cannot tell it is an overlay at all. And the fit is so perfect they ask if the car came with it.

CatiaJockey · 01-23-2011, 10:43 AM

Quote:

Originally Posted by TheColorBlack

Am I the only one not diggin the stickers.

Seriously...if you guys like carbon fiber so much...why not take the trims out and do a carbon fiber wrap.

All you need is a heat gun

The thickness and finish of these are far superior to a wrap. It looks incredible in person.

Tom D · 01-23-2011, 03:40 PM

Just placed my order for this. Not sure I will use all the pieces but there are some that I will use for sure. And the coupon code still works. Thanks for putting up the photos of the RJT colors. Do you have any more of the other pieces? And where they hard to place on?

GB EB · 01-23-2011, 07:54 PM

Quote:

Originally Posted by Tom D

Just placed my order for this. Not sure I will use all the pieces but there are some that I will use for sure. And the coupon code still works. Thanks for putting up the photos of the RJT colors. Do you have any more of the other pieces? And where they hard to place on?

true.....

we got 3 kits for a total coverage and it seems each passing day one more piece we decide is "too much" and take it off.

SSMOKINHOT · 01-23-2011, 10:01 PM

Quote:

Originally Posted by Tom D

Just placed my order for this. Not sure I will use all the pieces but there are some that I will use for sure. And the coupon code still works. Thanks for putting up the photos of the RJT colors. Do you have any more of the other pieces? And where they hard to place on?

I too only installed key pieces. They were EXTREMELY EASY to install!!! The pieces fit perfectly!!

Here are some more pics:

Here is a pic to show how well it matches the exterior:

Installation in progress...don't mind the messy floor board!

xpanda305x · 01-23-2011, 10:09 PM

pmed u a question

01-17-2011, 06:03 PM	#57
CatiaJockey Drives: 2010 2LT RS Join Date: Mar 2008 Location: Ocean Springs, Ms Posts: 2,799 View My Garage	Thanks, glad to hear it, its an awesome kit. __________________

01-17-2011, 10:33 PM	#60
SSMOKINHOT obseSSed Drives: 2010 Camaro 2SS/RS Join Date: May 2010 Location: In the garage doing mods!! Posts: 1,596 View My Garage	I have the real red and black (RRBCF) CF from Car id ....it is black carbon fiber and red kevlar. The colors match the RJT perfectly!!! __________________ Proud to be COTW 12/19/11 My build thread -----> http://www.camaro5.com/forums/showthread.php?t=140034

01-18-2011, 03:18 AM	#61
SummoneR Paul Drives: '10 2SS/RS M6 "Marauder" Join Date: Mar 2009 Location: NOR*CAL Posts: 6,230	HALFFAST The blue looks dark, how close is it really to the Aqua Blue Metallic? __________________

01-23-2011, 03:40 PM	#67
Tom D Drives: 10 Camaro SS/RS RJT Join Date: Dec 2009 Location: Ventura, Ca Posts: 415 View My Garage	Just placed my order for this. Not sure I will use all the pieces but there are some that I will use for sure. And the coupon code still works. Thanks for putting up the photos of the RJT colors. Do you have any more of the other pieces? And where they hard to place on? __________________ 2010 2SS/RS RJT, ADM CAI, Borla Shorties, Borla "S" Cat Back, Edelbrock E-Force Supercharger, GMS Wires, GMS Rear Trailing Arms, GMS Rotors, GMS End Links, GMS Tunnel Brace, GMS Rear Tie Rods, GMS 1G Suspension Package, GMS Stage 3 CNC ported heads, GMS Spec'd R12 Custom Ground Camshaft, Snow Meth Injection, GMS Custom Tuned, Norris Catch Can, MTI Brake Lines, Pfadt Coilovers, Sway Bars, Camber Kit, and Rear LCA Reinforcement, , AAC Footwell, Trunk, DRL and Dome LED Lighting, Technostalgia Tail Lights, RED B/A Pedals, Kompression Custom Wheels with Nitto tires, 621RWHP/584RWTQ

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
EXTERIOR & PHYSICAL	Milk 1027	Wiki	5	09-15-2010 04:40 PM
Carbon Fiber Cowl Hood, Trunk, and more! PHASTEK Peformance	Sean@Phastek	Exterior Parts & Accessories	3	01-29-2010 03:44 PM
Carbon Fiber Camaro Hood- Gauging interest	smoknc6z06	Exterior Parts & Accessories	9	11-25-2009 09:45 PM
Real Carbon Fiber Shift Knob Finished!!! (Picture Inside)	dsvcustoms	Interior Parts & Accessories	27	09-24-2009 06:37 PM

01-23-2011, 02:15 AM	#63
TheColorBlack Drives: Black 2011 LS Join Date: Jan 2011 Location: San Jose, CA Posts: 140	Am I the only one not diggin the stickers. Seriously...if you guys like carbon fiber so much...why not take the trims out and do a carbon fiber wrap. All you need is a heat gun

01-23-2011, 10:09 PM	#70
xpanda305x Banned Drives: Dark Knight Join Date: Nov 2009 Location: Gunshine State Posts: 3,150 View My Garage	pmed u a question