GMPP Catback Exhaust - Page 4 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Robin Lawrence · 02-09-2009, 12:11 PM

Quote:

Originally Posted by AlvinT

This is Alvin from Borla Performance Industries in California. Borla will manufacturer the GMPP catback exhaust. The Borla branded parts will be slightly different. I hope this is helpful information. Thanks.

There you have it!

Thanks Alvin

Robin

Andro · 02-09-2009, 01:01 PM

Quote:

Originally Posted by AlvinT

This is Alvin from Borla Performance Industries in California. Borla will manufacturer the GMPP catback exhaust. The Borla branded parts will be slightly different. I hope this is helpful information. Thanks.

Quote:

Originally Posted by Robin Lawrence

There you have it!

Thanks Alvin

Robin

It's confirmed Thanks Guys

Mr Twisty · 02-09-2009, 01:34 PM

Slightly different??? WTF u mean???

Just kidding, thanks for the info.

(slightly fifferent deserves a whole new conspiracy theory thread

)

*radz28* · 02-09-2009, 01:39 PM

Quote:

Originally Posted by Robin Lawrence

There you have it!

Thanks Alvin

Robin

Quote:

Originally Posted by AlvinT

This is Alvin from Borla Performance Industries in California. Borla will manufacturer the GMPP catback exhaust. The Borla branded parts will be slightly different. I hope this is helpful information. Thanks.

Quote:

Originally Posted by Andro

It's confirmed Thanks Guys

Quote:

Originally Posted by MisterCamaro69

Slightly different??? WTF u mean???

Just kidding, thanks for the info.

(slightly fifferent deserves a whole new conspiracy theory thread

)

Thanks for the info' and I hope it was okay to post here. I wonder what the differences are.

bobby35ny · 02-09-2009, 01:50 PM

Thanks for the info Alvin and Robin!!

Do either system produce the dreaded "Drone"

=bobby

Rodrunner · 02-09-2009, 01:52 PM

Quote:

Originally Posted by MisterCamaro69

Slightly different??? WTF u mean???

Just kidding, thanks for the info.

(slightly fifferent deserves a whole new conspiracy theory thread

)

And I'm just about bored enough to start it. So....the tips are going to be bowtie shaped?

EDIT: Where are my manners...Thank You Alvin and Robin...you're the best!!!

playhard67 · 02-09-2009, 03:00 PM

Alvin and Robin, thanks for your help.

ArcAngel · 02-09-2009, 03:03 PM

no the tips have a bowtie stamp on the top for reference see LS7 camaro

spd98 · 02-09-2009, 05:17 PM

They will of course be built by the lowest bidder! Lol Most of the GMPP parts are built by a variety of aftermarket sources. These guy's almost always make them different than thier own aftermarket kits. I personally know magnaflow has made some of the GMPP kits and they sounded different and were a lot cheaper than the official magnaflow kit. A vendor has to run a buisness and make a profit to justify it's existance.

All that said I'll be going the corsa route again and anyone wanting a catback for power needs to rethink things.

Mr Twisty · 02-09-2009, 05:26 PM

Quote:

Originally Posted by spd98

They will of course be built by the lowest bidder! .

You're not serious...are you?

Robert91RS · 02-09-2009, 05:43 PM

Robin, I would like to appologize for some of the responses you got. Uncalled for here and we are honored to have your input. Some of us need to be more thoughtful of who we are speeking to here before we post.

themossman · 02-09-2009, 06:01 PM

Quote:

Originally Posted by Robert91RS

Robin, I would like to appologize for some of the responses you got. Uncalled for here and we are honored to have your input. Some of us need to be more thoughtful of who we are speeking to here before we post.

That's pretty brash to apologize for other people...especially considering Robins response. I too thought it was a bit curt and dismissive...regardless of who it came from. We are the customers, and it is our money that is being spent...why wouldn't we care?

When it comes to exhaust...it can be very personal...Borla is know for it's distinctive sound...

Previously I had not considered the GMPP exhaust...but if it's Borla it'll find it's way back into the running.

Robin- I read your subsequent emails and see that your tone was not intended...so I don't direct any frustration at you. Sometimes it's hard to communicate tone in text...and we all appeared to take your text at 'face' value, sans tone.

Robert91RS · 02-09-2009, 07:55 PM

Quote:

Originally Posted by themossman

That's pretty brash to apologize for other people...especially considering Robins response. I too thought it was a bit curt and dismissive...regardless of who it came from. We are the customers, and it is our money that is being spent...why wouldn't we care?

I didn't single anyone out so please don't be offended. However, I've spoke to Robin here on several occasions and know him to be anything but rude. Furthermore I think it is a privilege to come here and speak with great people like Robin, Scott, John and the other loyalist at GM. Robin has nothing to sell us, and our frustrations and strong anticipation for this car should not be taken out on him. What a loss it would be to lose such a valuable resource such as Robin because someone didn't know. Yes I was "brash," but to be completely honest I was also embarrassed at some of the post that followed his. Just to be clear, I think the OP's question was entirely valid and that Robin was simply misunderstood.

bobby35ny · 02-09-2009, 10:29 PM

Here ya go, Borla interview saying they have been playing with the 2010 Camaro for a long time and they are making the exhaust. Day late dollar short, LOL

http://www.borla.com/films/main.aspx?video_id=5

-bobby

02-09-2009, 01:50 PM	#47
bobby35ny Drives: 18 ZL1 A10 Join Date: Nov 2008 Location: South East, FL Posts: 3,023	Thanks for the info Alvin and Robin!! Do either system produce the dreaded "Drone" =bobby __________________ 2017 ZL1 M6 Bog City, 2013 ZL1 M6, 2010 2SS M6 ZL1::J-E-T-S JETS JETS JETS

02-09-2009, 03:00 PM	#49
playhard67 come to poppa Drives: 67RS,09 Harley FLHX Join Date: Jun 2008 Location: Maryland Posts: 1,098	Alvin and Robin, thanks for your help. __________________ Cancelled the 2010 SS/RS (for now) and bought this instead (2009 Harley FLHX)

02-09-2009, 03:03 PM	#50
ArcAngel Drives: 07 Black Cobalt SS/SC Join Date: Aug 2006 Location: Manalapan-NJ Posts: 2,872	no the tips have a bowtie stamp on the top for reference see LS7 camaro __________________ Through HIM you believe in GOD, who raised HIM from the dead and Glorified him..

02-09-2009, 10:29 PM	#56
bobby35ny Drives: 18 ZL1 A10 Join Date: Nov 2008 Location: South East, FL Posts: 3,023	Here ya go, Borla interview saying they have been playing with the 2010 Camaro for a long time and they are making the exhaust. Day late dollar short, LOL http://www.borla.com/films/main.aspx?video_id=5 -bobby __________________ 2017 ZL1 M6 Bog City, 2013 ZL1 M6, 2010 2SS M6 ZL1::J-E-T-S JETS JETS JETS

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
catback exhaust question?	pinkcamaro10	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	88	04-06-2009 05:55 PM
questions about catback exhaust	babyjulie83	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	11	02-10-2009 02:52 PM
GMPP headers, intake, catback??	ArcAngel	5th Gen Camaro SS LS LT General Discussions	61	01-31-2009 05:41 PM
original catback or accesories catback exhaust for v6	cosmin haraga	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	8	01-14-2009 05:46 AM
EXHAUST SYSTEMS - Which Ones Better N WHY ?	kamisxy	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	57	12-13-2008 10:28 AM

02-09-2009, 01:34 PM	#45
Mr Twisty Drives: the 2nd amendment home Join Date: May 2008 Location: OK Posts: 14,763	Slightly different??? WTF u mean??? Just kidding, thanks for the info. (slightly fifferent deserves a whole new conspiracy theory thread )

02-09-2009, 05:17 PM	#51
spd98 Drives: had a goat Join Date: Aug 2008 Location: atlanta, ga Posts: 351	They will of course be built by the lowest bidder! Lol Most of the GMPP parts are built by a variety of aftermarket sources. These guy's almost always make them different than thier own aftermarket kits. I personally know magnaflow has made some of the GMPP kits and they sounded different and were a lot cheaper than the official magnaflow kit. A vendor has to run a buisness and make a profit to justify it's existance. All that said I'll be going the corsa route again and anyone wanting a catback for power needs to rethink things.

02-09-2009, 05:43 PM	#53
Robert91RS Drives: Everywhere Join Date: Jun 2008 Location: TX Posts: 852	Robin, I would like to appologize for some of the responses you got. Uncalled for here and we are honored to have your input. Some of us need to be more thoughtful of who we are speeking to here before we post.