SW Ohio Spring 2011 Mod Day & Car Show - Page 4 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Darth_Emma · 03-06-2011, 11:46 AM

I ordered the MPD1 spoiler. Shardik2SS just put one on his car and it looks great.
http://www.camaro5.com/forums/showthread.php?t=96112

The stock spoiler is ok, but not great and I hadn't seen one I liked until I saw the MPD1.

IROCanSS · 03-06-2011, 12:30 PM

Quote:

Originally Posted by Darth_Emma

I ordered the MPD1 spoiler. Shardik2SS just put one on his car and it looks great.
http://www.camaro5.com/forums/showthread.php?t=96112

The stock spoiler is ok, but not great and I hadn't seen one I liked until I saw the MPD1.

I agree his spoiler is awesome! too bad he's an a$$hole

and I agree with you somewhat... you were nicer than I would have been, I think the stock spoiler is sort of ugly... too small. With that said, I feel the others are a bit big for my liking. I really dig the convertible spoiler. Subtlely different. I am just betting its expensive since it has the antenna intergrated.

As far as Mod Day goes... I am sure we can manage a spoiler install. Its only 6 bolts.

Bonemaro · 03-06-2011, 01:40 PM

Quote:

and a panel popper tool to get the backing off the trunk lid).

All you need is a fork from the kitchen. Fits arounds the plastic and pop them right off, zero damage. We can have that trunk lid backing off in 2 minutes time

Bonemaro · 03-06-2011, 01:43 PM

Quote:

Originally Posted by jrhaus76

I like the $99 one.... If you are going to order one, anyone, get with me... maybe we can save on shipping if you just order 2. We can install them on Mod Day. I don't care on color as long as its black.

Black sounds cool to me as well, you can add me to the list. Now tell me... what are the cons to having a catch can?

Darth_Emma · 03-06-2011, 01:46 PM

Quote:

Originally Posted by Bonemaro

All you need is a fork from the kitchen. Fits arounds the plastic and pop them right off, zero damage. We can have that trunk lid backing off in 2 minutes time

Thanks. I was just making an excuse to wait until mod day to put it on. I'm sure I could do it at home, but it's more fun when there is a peanut gallery.

I just ordered the spoiler today, so it'll be a couple of weeks before I have it.

The company that sells it recommends putting a couple of beads of silicone under the spoiler when mouting it to stop it from scratching the paint on the trunk lid. I'll need to get some silicone.

Darth_Emma · 03-06-2011, 01:46 PM

Quote:

Originally Posted by Bonemaro

Black sounds cool to me as well, you can add me to the list. Now tell me... what are the cons to having a catch can?

I really don't think there is a down side except for the expense of buying one.

gahammerle · 03-06-2011, 01:55 PM

Quote:

Originally Posted by photonfury

Looking for an oil catch can and i think i've limited down to these 3

billet prototypes
http://shop.billetprototypes.com/pro...&categoryId=66

Billet Depot
http://www.billetdepot.com/chevrolet...camaro-10.html

RX Performance
http://www.camaro5.com/forums/showthread.php?t=109416

Any opinions????

My RX performance can was delivered yesterday. Paint quality could be better, but it is good enough for being under the hood of my daily driver. I got the IOM can.

gahammerle · 03-06-2011, 01:57 PM

Quote:

Originally Posted by Darth_Emma

The stock spoiler is ok, but not great and I hadn't seen one I liked until I saw the MPD1.

The MPD1 is my favorite, but I am still on the fence about adding a spoiler. The no-spoiler look is growing on me.

WadeWilson · 03-06-2011, 03:28 PM

Quote:

Originally Posted by jrhaus76

I agree his spoiler is awesome! too bad he's an a$$hole

Hey Haus I resemble that remark!!

IROCanSS · 03-06-2011, 03:42 PM

Bwahahaha!

photonfury · 03-06-2011, 03:55 PM

The $99 dollar catch can only comes in a satin or polished finish. The billet proto in black with black fittings and black braided hose comes to $130 each before shipping. I've emailed them on a shipping quote.
The kit would look like this install, http://www.camaro5.com/forums/showthread.php?t=86524
What do you think?

IROCanSS · 03-06-2011, 04:03 PM

Well, if the $99 one is only in satin or polished, I'd pick satin. I am not a bling engine guy and my engine is filthy... darn gravel roads! Its enough work keeping the outside and interior clean. The engine bay isnt the cleanist and I could paint it if need be.

I say lets go the cheap route. Thoughts? Also looks like bonemaro wants in too... did you ask for a quote for 3? Thanks!

photonfury · 03-06-2011, 04:18 PM

Yeah, i asked for a shipping quote on 3 of the billet proto's.

Noone else on the forum is talking about the billet depot one, pretty much the RX, billet proto and elite are the ones typically listed.
I don't mind giving them a shot though.

BoneMaro are you still interested in a satin one?
Is anyone else interested in getting in on this order? I can contact them and see if we can get some sort of a deal.

IROCanSS · 03-06-2011, 04:22 PM

Whatever you think is best. Just let me know what I owe you. I'll bring you cash to mod day if that works.

View Poll Results: Preferred days for a Mod Day & Car Show
04/02/11 Sat	10	37.04%
04/03/11 Sun	6	22.22%
04/09/11 Sat	6	22.22%
04/10/11 Sun	6	22.22%
04/23/11 Sat	9	33.33%
04/24/11 Sun	3	11.11%
04/30/11 Sat	10	37.04%
05/01/11 Sun	7	25.93%
05/07/11 Sat	17	62.96%
05/08/11 Sun	5	18.52%
05/14/11 Sat	10	37.04%
05/15/11 Sun	5	18.52%
Multiple Choice Poll. Voters: 27. You may not vote on this poll

03-06-2011, 03:55 PM	#53
photonfury I wanna go fast!!!! Drives: 2010 SS/RS Inferno Orange Metallic Join Date: Dec 2010 Location: Fennville, MI Posts: 332 View My Garage	The $99 dollar catch can only comes in a satin or polished finish. The billet proto in black with black fittings and black braided hose comes to $130 each before shipping. I've emailed them on a shipping quote. The kit would look like this install, http://www.camaro5.com/forums/showthread.php?t=86524 What do you think? __________________ Proud Member Dayton Camaro Club (DCC) http://www.camaro5.com/forums/group.php?groupid=412 And on Facebook https://www.facebook.com/groups/DaytonCamaroClub/

03-06-2011, 04:18 PM	#55
photonfury I wanna go fast!!!! Drives: 2010 SS/RS Inferno Orange Metallic Join Date: Dec 2010 Location: Fennville, MI Posts: 332 View My Garage	Yeah, i asked for a shipping quote on 3 of the billet proto's. Noone else on the forum is talking about the billet depot one, pretty much the RX, billet proto and elite are the ones typically listed. I don't mind giving them a shot though. BoneMaro are you still interested in a satin one? Is anyone else interested in getting in on this order? I can contact them and see if we can get some sort of a deal. __________________ Proud Member Dayton Camaro Club (DCC) http://www.camaro5.com/forums/group.php?groupid=412 And on Facebook https://www.facebook.com/groups/DaytonCamaroClub/

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Chevy Street Cruise to open Super Chevy Show Weekend in Houston	Houston Raceway	USA - Texas	0	08-08-2010 08:11 AM
USMA Michigan Nationals Charity Car Show	philthy	USA - Great Lakes	6	07-23-2010 02:49 PM
SW Ohio mod day #2	heinzd01	USA - Great Lakes	473	05-28-2010 11:41 AM
#4768 - Delivered and Made Ready the Right Way!	Number_9	5th Gen Camaro SS LS LT General Discussions	62	07-16-2009 02:42 AM

03-06-2011, 11:46 AM	#43
Darth_Emma Psssssssssshhhhhhhhhhhhh! Drives: under contruction Join Date: Nov 2009 Location: Marysville, Ohio Posts: 12,996 View My Garage	I ordered the MPD1 spoiler. Shardik2SS just put one on his car and it looks great. http://www.camaro5.com/forums/showthread.php?t=96112 The stock spoiler is ok, but not great and I hadn't seen one I liked until I saw the MPD1.

03-06-2011, 03:42 PM	#52
IROCanSS Account Suspended Drives: 89 IROC 350 Join Date: Mar 2009 Location: Back roads, southern Ohio Posts: 12,504 View My Garage	Bwahahaha!

03-06-2011, 04:03 PM	#54
IROCanSS Account Suspended Drives: 89 IROC 350 Join Date: Mar 2009 Location: Back roads, southern Ohio Posts: 12,504 View My Garage	Well, if the $99 one is only in satin or polished, I'd pick satin. I am not a bling engine guy and my engine is filthy... darn gravel roads! Its enough work keeping the outside and interior clean. The engine bay isnt the cleanist and I could paint it if need be. I say lets go the cheap route. Thoughts? Also looks like bonemaro wants in too... did you ask for a quote for 3? Thanks!

03-06-2011, 04:22 PM	#56
IROCanSS Account Suspended Drives: 89 IROC 350 Join Date: Mar 2009 Location: Back roads, southern Ohio Posts: 12,504 View My Garage	Whatever you think is best. Just let me know what I owe you. I'll bring you cash to mod day if that works.