![]() |
|
|
#1 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2017 Mosaic Bk ZL1 M6 Join Date: Jul 2009
Location: South of Raleigh, NC
Posts: 9,618
|
Wheel backspacing
Can someone tell me the stock wheel backspacing front and rear for the SS?
Yes, I've done a search and only found offset in Wiki. I can't measure myself because the car is in storage. Thanks
__________________
|
|
|
|
|
|
#2 |
|
Master of All Things
Drives: '26 Corvette Stingray Join Date: Jul 2009
Location: Southeast of Houston, Texas
Posts: 22,714
|
I have a new pair in the box at home.....if you are still needing the info this afternoon, I will take one out of the box and measure it for you.
__________________
|
|
|
|
|
|
#3 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 1969 & 2016 Camaro SS Join Date: Oct 2008
Location: Houston, TX
Posts: 3,849
|
If you have the widths and offsets, you can use this site to calculate backspacing.
http://www.autolounge.net/calculators/tirespacing.html Tony
__________________
Fquick.com/NineBall
|
|
|
|
|
|
#4 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2017 Mosaic Bk ZL1 M6 Join Date: Jul 2009
Location: South of Raleigh, NC
Posts: 9,618
|
Thanks guys. I am looking at American Racing Villian and Tire Rack shows an 8.5 width for the front and and 10 inch for the rear. The offset for both is 38. Backspacing according to the American racing website is 6.25 front and 7.00 rear. By the calculator Nine Ball sent, stock backspacing is 5.87 front and 6.57 rear, with offsets being 35 front and 40 rear. Just wanted to make sure these wheels work before I buy them. The numbers seem OK to me, except a 10 inch rear may be getting borderline, but hell, I had a '67 with L60s on a 6.75 inch wheel. Do you think I'm OK ordering these wheels? They are 20s by the way.
__________________
|
|
|
|
|
|
#5 |
|
Master of All Things
Drives: '26 Corvette Stingray Join Date: Jul 2009
Location: Southeast of Houston, Texas
Posts: 22,714
|
When I got home, as promised, I got one of my new REAR factory stock 20's and physically measured it, the backspacing on the REARS of the stock 20's is 6.625" (6 5/8") on the money.
__________________
|
|
|
|
|
|
|
|
![]() |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Wheel studs with more threads - solution I used | Blue70SS | Wheels and Tires Talk Sponsored by The Tire Rack | 7 | 03-01-2011 03:55 PM |
| Rear Wheel Hub Removal....Help! | blazzin1 | V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) | 9 | 02-15-2011 02:23 PM |
| Tires loosing pressure | joepitt | Wheels and Tires Talk Sponsored by The Tire Rack | 22 | 12-11-2010 06:00 PM |
| 2010 Camaro Wheel Locks Caution... | willie2323 | Wheels and Tires Talk Sponsored by The Tire Rack | 3 | 06-20-2010 10:41 AM |
| Anybody know for sure the wheel backspacing??? | the rich dude | Wheels and Tires Talk Sponsored by The Tire Rack | 0 | 09-23-2009 05:45 PM |