OHIO CAMARO ENTHUSIASTS/OWNERS REPORT HERE - Page 372 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

nak3dsnake · 03-20-2011, 03:34 PM

ABL is in the dash. Don't know if any adjustments will need to be made until it gets dark. Will post pics later tonight.

IROCanSS · 03-20-2011, 04:32 PM

getting it in is the easy part. its getting the light EVEN all the way accross. Thats what F'ed me up. I had a thin spot in the middle and really wide, bright spot near the passenger edge. Not acceptable.

photonfury · 03-20-2011, 05:16 PM

Quote:

Originally Posted by nak3dsnake

ABL is in the dash. Don't know if any adjustments will need to be made until it gets dark. Will post pics later tonight.

Yes, please share some pics, i'd like to do this to mine at some point. I'm just not going to have Jason do it.

I ended up ordering the LED interior replacment bulbs and the footwell lights from ebay for 17 bucks total. We'll see how they come out.

IROCanSS · 03-20-2011, 05:33 PM

Quote:

Originally Posted by photonfury

Yes, please share some pics, i'd like to do this to mine at some point. I'm just not going to have Jason do it.

GOOD MOVE!

I can do a lot of things... this is not one of the them!

nak3dsnake · 03-20-2011, 10:27 PM

Got the ABL in, everything is great except the position of the panels. I haven't quite got the spacing right, especially on the drivers side panel. I'm also going to tape off the bottom and sides so that the light only shows at the top and not around the sides.

IROCanSS · 03-20-2011, 10:31 PM

See... now the fun begins. No offense here but I got mine better than that and still ripped it out.. I am a total perfectionist! Good luck, keeping fiddling with it. I have seen ones that are PERFECT... I just couldnt get it.

nak3dsnake · 03-20-2011, 10:43 PM

I'm having issues with the adhesive tape on the panels too, not sticking right. That's why its so uneven. The panels pulled completely away from the clips when I tried to pull them off. I'm going to buy some double sided 3M and re-tape it all. Use it as a spacer too.

EarliestMemory · 03-21-2011, 06:23 PM

Hey everyone, no exciting mods going on here, but I figured might as well give the thread a bump... my husband did an oil change on the Camaro today and had some fun!

Usually he does this in front of the neighbors' house - these are right in (and coming out of) our driveway...

IROCanSS · 03-21-2011, 07:20 PM

Nice! Your limited slip is working perfectly!

Mine choaked once... I did the same thing as the second pic and it was a one wheel peel... BOOO!

EarliestMemory · 03-21-2011, 07:45 PM

Quote:

Originally Posted by jrhaus76

Nice! Your limited slip is working perfectly!

Mine choaked once... I did the same thing as the second pic and it was a one wheel peel... BOOO!

LOL! My husband went down the street, and did what you described... he was so disappointed!

He says there's a reason why he doesn't drive my car often. I said, "Yeah, we'd be spending a fortune in tires!"

IROCanSS · 03-21-2011, 07:58 PM

Quote:

Originally Posted by EarliestMemory

LOL! My husband went down the street, and did what you described... he was so disappointed!

He says there's a reason why he doesn't drive my car often. I said, "Yeah, we'd be spending a fortune in tires!"

I was too! I did it in front of a few people that were egging me on. One has a G8 GT with the LS2 and I failed! LOL

cntryman77 · 03-22-2011, 10:17 AM

ugh, one more day...tomorrow I'm heading to NC...woohooo

SEOhioSS · 03-22-2011, 09:54 PM

Quote:

Originally Posted by jrhaus76

What's that white 92ish Cavalier 4 door getting done? New cam?

Thats not a cavalier. Its a 90's Galant VR4. Actually very cool cars. They had the Turbo Eclipse engine in them and all wheel drive. That car is probably getting some mean motor work done to it.

IROCanSS · 03-22-2011, 09:59 PM

Quote:

Originally Posted by SEOhioSS

Thats not a cavalier. Its a 90's Galant VR4. Actually very cool cars. They had the Turbo Eclipse engine in them and all wheel drive. That car is probably getting some mean motor work done to it.

HOLY CRAP MAN!!! Good freakin call.

I had to go back and look. You're right.

With that said... pretty said that I... someone who is very much into cars can mistake it that easily!

03-20-2011, 10:27 PM	#5199
nak3dsnake Drives: 2010 Camaro IBM 2LT/RS M6 Join Date: Sep 2009 Location: Columbus, OH Posts: 2,282 View My Garage	Got the ABL in, everything is great except the position of the panels. I haven't quite got the spacing right, especially on the drivers side panel. I'm also going to tape off the bottom and sides so that the light only shows at the top and not around the sides. Last edited by nak3dsnake; 03-20-2011 at 10:43 PM.

03-21-2011, 06:23 PM	#5202
EarliestMemory RED HT RS Drives: 10 VR 2LT/RS Camaro, 06 Harley Join Date: Oct 2008 Location: Dayton, OH Posts: 577 View My Garage	Oil change = too much fun Hey everyone, no exciting mods going on here, but I figured might as well give the thread a bump... my husband did an oil change on the Camaro today and had some fun! Usually he does this in front of the neighbors' house - these are right in (and coming out of) our driveway... Attached Images __________________

03-22-2011, 10:17 AM	#5206
cntryman77 Drives: 2010 Camaro LS Join Date: Mar 2010 Location: Newton Falls, OH Posts: 1,092	ugh, one more day...tomorrow I'm heading to NC...woohooo __________________ My build thread: http://www.camaro5.com/forums/showthread.php?t=126631

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Songs About Camaros (for your driving pleasure)	Emjay	5th Gen Camaro SS LS LT General Discussions	74	12-18-2014 01:42 AM
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 08:33 PM
CNN: Camaro: From sketchpad to street - The rebirth of a muscle car ...	Gatecrasher	5th Gen Camaro SS LS LT General Discussions	49	10-05-2009 04:33 PM
UPCOMING CAMARO IMPORTANT DATES	CamaroScotty	5th Gen Camaro SS LS LT General Discussions	125	01-11-2009 01:31 AM
Camaro Accessories from SEMA	FenwickHockey65	5th Gen Camaro SS LS LT General Discussions	1	11-03-2008 03:25 PM

03-20-2011, 03:34 PM	#5195
nak3dsnake Drives: 2010 Camaro IBM 2LT/RS M6 Join Date: Sep 2009 Location: Columbus, OH Posts: 2,282 View My Garage	ABL is in the dash. Don't know if any adjustments will need to be made until it gets dark. Will post pics later tonight.

03-20-2011, 04:32 PM	#5196
IROCanSS Account Suspended Drives: 89 IROC 350 Join Date: Mar 2009 Location: Back roads, southern Ohio Posts: 12,504 View My Garage	getting it in is the easy part. its getting the light EVEN all the way accross. Thats what F'ed me up. I had a thin spot in the middle and really wide, bright spot near the passenger edge. Not acceptable.

03-20-2011, 10:31 PM	#5200
IROCanSS Account Suspended Drives: 89 IROC 350 Join Date: Mar 2009 Location: Back roads, southern Ohio Posts: 12,504 View My Garage	See... now the fun begins. No offense here but I got mine better than that and still ripped it out.. I am a total perfectionist! Good luck, keeping fiddling with it. I have seen ones that are PERFECT... I just couldnt get it.

03-20-2011, 10:43 PM	#5201
nak3dsnake Drives: 2010 Camaro IBM 2LT/RS M6 Join Date: Sep 2009 Location: Columbus, OH Posts: 2,282 View My Garage	I'm having issues with the adhesive tape on the panels too, not sticking right. That's why its so uneven. The panels pulled completely away from the clips when I tried to pull them off. I'm going to buy some double sided 3M and re-tape it all. Use it as a spacer too.

03-21-2011, 07:20 PM	#5203
IROCanSS Account Suspended Drives: 89 IROC 350 Join Date: Mar 2009 Location: Back roads, southern Ohio Posts: 12,504 View My Garage	Nice! Your limited slip is working perfectly! Mine choaked once... I did the same thing as the second pic and it was a one wheel peel... BOOO!