El Paso Chapter of Camaro5 - Page 95 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

mws444 · 03-29-2011, 08:25 PM

Quote:

Originally Posted by viper1cobra

Vince, I took this when I placed the card on your car.

+1 Vince your car is looking great! Those wheels Pop!

SSRS2010 · 03-29-2011, 08:40 PM

Quote:

Originally Posted by viper1cobra

NP. We had fun, and it was for a good cause.

Thanks Guys for coming out

PIANOMN · 03-29-2011, 09:12 PM

Quote:

Originally Posted by viper1cobra

Where did you get them?

Online or Local.

I have been thinking about changing my wheels also, and those wheels were on my short list along with Foose.

found them on bestwheeldeals.com they are a vender on this site as well

got a great deal on wheels plus tires and tpms, mounted and balenced, shipping was free and fast.

Quote:

Originally Posted by mws444

+1 Vince your car is looking great! Those wheels Pop!

Thanks! The cruise to c5Fest is the next time I will probably get the chance to see evryone

viper1cobra · 03-29-2011, 10:53 PM

[QUOTE=PIANOMN;3027180]found them on bestwheeldeals.com they are a vender on this site as well

got a great deal on wheels plus tires and tpms, mounted and balenced, shipping was free and fast.

Great.

I was also looking at them as a possible vendor for mine.

mws444 · 03-30-2011, 07:30 AM

Take a look at what Perry over at ptswheels.com has. He is a sponser here and located in Roswell. Great guy, and good prices! He has the new Weld wheels for a 17" slick that will clear our big brakes.

jose1003 · 03-30-2011, 12:12 PM

yo eric what time r u planning to go trinity site,
still debating if we want to attend
talk to wife

viper1cobra · 03-30-2011, 04:25 PM

Quote:

Originally Posted by jose1003

yo eric what time r u planning to go trinity site,
still debating if we want to attend
talk to wife

We are leaving EP around 0500 in AM, as it is 4 hr trip one way. Gate opens at 0800, and closes at 1400.

We also want to beat the caravan coming from Tularosa that leaves at 0800. If we are lucky we will get there and finish by the time the Tularosa caravan arrives.

Call me if you are interested in going and we can set a time to meet.

viper1cobra · 03-30-2011, 04:26 PM

Quote:

Originally Posted by mws444

Take a look at what Perry over at ptswheels.com has. He is a sponser here and located in Roswell. Great guy, and good prices! He has the new Weld wheels for a 17" slick that will clear our big brakes.

I have spoke with him, and he was getting me prices, and then never called me back.

mws444 · 03-31-2011, 06:05 AM

Quote:

Originally Posted by viper1cobra

I have spoke with him, and he was getting me prices, and then never called me back.

Wow, he must have forgatten you. He said he is doing a new website and swamped. He is going to have his Dad drive my wheels over from Roswell, if they make it in time so I will have them. He really appears to be a go getter kind guy, who will go out of his way for a customer. Give him another try, tell him I sent you over.

viper1cobra · 04-01-2011, 01:15 PM

Quote:

Originally Posted by mws444

Wow, he must have forgatten you. He said he is doing a new website and swamped. He is going to have his Dad drive my wheels over from Roswell, if they make it in time so I will have them. He really appears to be a go getter kind guy, who will go out of his way for a customer. Give him another try, tell him I sent you over.

I will keep him in mind, however I was able to get a better price through a local dealer, on the same wheels that he had quoted me. That was before he stopped contacting me.

mws444 · 04-01-2011, 11:13 PM

Quote:

Originally Posted by viper1cobra

I will keep him in mind, however I was able to get a better price through a local dealer, on the same wheels that he had quoted me. That was before he stopped contacting me.

Understood!

Looks like my car just might be ready in time for the Fest! Still alot that could happen but right now it looks good. Of course the overnite freight bil is going to be nasty!

Now if my new Weld wheels and Hoosier full bias slicks make it.....

mws444 · 04-01-2011, 11:14 PM

Just thought of another dealer, have you tried Forrest Tire? I know the owner there and he is a great guy!

viper1cobra · 04-03-2011, 02:11 PM

Quote:

Originally Posted by mws444

Understood!

Looks like my car just might be ready in time for the Fest! Still alot that could happen but right now it looks good. Of course the overnite freight bil is going to be nasty!

Now if my new Weld wheels and Hoosier full bias slicks make it.....

That is great.

I hope it all works out for you.

Quote:

Originally Posted by mws444

Just thought of another dealer, have you tried Forrest Tire? I know the owner there and he is a great guy!

No, I have not tried Forrest Tire yet. Where are they located?

mws444 · 04-04-2011, 07:17 AM

They have an old commercial store on the North-South freeway off Diana, and another new much nicer consumer driven store on 7440 N. Mesa.

03-29-2011, 10:53 PM	#1320
viper1cobra Member Club Elite #131 Drives: 2017 50th Anniversary H50 2SS Join Date: May 2009 Location: Far West TEXAS Posts: 1,729 View My Garage	[QUOTE=PIANOMN;3027180]found them on bestwheeldeals.com they are a vender on this site as well got a great deal on wheels plus tires and tpms, mounted and balenced, shipping was free and fast. Great. I was also looking at them as a possible vendor for mine. __________________

03-30-2011, 07:30 AM	#1321
mws444 Drives: 701 RWHP Lingenfelter/Pedders Beast Join Date: Apr 2009 Location: El Paso Posts: 2,973	Take a look at what Perry over at ptswheels.com has. He is a sponser here and located in Roswell. Great guy, and good prices! He has the new Weld wheels for a 17" slick that will clear our big brakes. __________________ Lingenfelter forged balanced and blueprinted LS3, Maggie TVS 2300 LPE 9.5" Rearend 3.73,LPE dual disk clutch,10/14 rib belt drive, MTI shifter,RPM Level VI,Corsa stainless cat back, Racing Brake Rotors, LPE calipers, LPE twin fuel pumps, American Racing long tube headers, GT9 cam Port and polished heads and an ADM majic tune. 701 RWHP,Fully Pedderized w/complete bushings and Sportsryder Supercar Remote resevior coilovers. CCW 505t's Nitto Invo's and DR's Beware of the LPE Brotherhood!

03-30-2011, 12:12 PM	#1322
jose1003 Drives: 2010 Camaro 2SS Cyber Gray Join Date: Jul 2009 Location: El Paso, Texas Posts: 1,132	yo eric what time r u planning to go trinity site, still debating if we want to attend talk to wife __________________

04-01-2011, 11:14 PM	#1328
mws444 Drives: 701 RWHP Lingenfelter/Pedders Beast Join Date: Apr 2009 Location: El Paso Posts: 2,973	Just thought of another dealer, have you tried Forrest Tire? I know the owner there and he is a great guy! __________________ Lingenfelter forged balanced and blueprinted LS3, Maggie TVS 2300 LPE 9.5" Rearend 3.73,LPE dual disk clutch,10/14 rib belt drive, MTI shifter,RPM Level VI,Corsa stainless cat back, Racing Brake Rotors, LPE calipers, LPE twin fuel pumps, American Racing long tube headers, GT9 cam Port and polished heads and an ADM majic tune. 701 RWHP,Fully Pedderized w/complete bushings and Sportsryder Supercar Remote resevior coilovers. CCW 505t's Nitto Invo's and DR's Beware of the LPE Brotherhood!

04-04-2011, 07:17 AM	#1330
mws444 Drives: 701 RWHP Lingenfelter/Pedders Beast Join Date: Apr 2009 Location: El Paso Posts: 2,973	They have an old commercial store on the North-South freeway off Diana, and another new much nicer consumer driven store on 7440 N. Mesa. __________________ Lingenfelter forged balanced and blueprinted LS3, Maggie TVS 2300 LPE 9.5" Rearend 3.73,LPE dual disk clutch,10/14 rib belt drive, MTI shifter,RPM Level VI,Corsa stainless cat back, Racing Brake Rotors, LPE calipers, LPE twin fuel pumps, American Racing long tube headers, GT9 cam Port and polished heads and an ADM majic tune. 701 RWHP,Fully Pedderized w/complete bushings and Sportsryder Supercar Remote resevior coilovers. CCW 505t's Nitto Invo's and DR's Beware of the LPE Brotherhood!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
South East Camaro5 Chapter Meet	GTAHVIT	USA - Southeast	238	05-25-2010 05:01 PM
What VIN is yours?	UCF w00t	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	346	03-29-2010 06:55 PM
Laws Protecting Consumers for Aftermarket Parts	strauchpete	Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum	9	01-17-2010 09:31 AM
IMPORTANT Part 1 Warranty Disputes	Zeus	Camaro Issues / Problems \| Warranty Discussions \| TSB and Recalls	11	08-25-2009 12:37 PM
Pre-packaged chap11, sounds like a good plan	Design1stCode2nd	General Automotive + Other Cars Discussion	2	11-26-2008 11:03 PM