Install question - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

cyberLS · 04-15-2011, 12:47 AM

I just got my eibach lowering springs installed and it seems like my car has a rake rather then sitting even like the others that i have seen? could they have switched the springs and put 1.4 in the front and 1.0 in the back. and also will it do damage to the car. It has been about three days but i havent drove it more then 20 miles since.

2010rod · 04-17-2011, 03:59 AM

Looks good to me. What kind of springs did u go with? Eibach. Got it!

caverman · 04-17-2011, 11:22 PM

I thought Eibach was 1" all around.

Here is my Hotchkis with 1" drop.

steeleshark2 · 04-18-2011, 02:30 AM

Mine are 1" all around.

Jaysin · 04-18-2011, 08:12 AM

I agree, it looks like it needs to come down in the back.

steeleshark2 · 04-18-2011, 08:22 AM

Are you on a flat surface? I do see some extra gap on the rear tire.

The Stig · 04-18-2011, 08:47 AM

Apex sells a split drop springs set (1.4 in the front and 1 in the back). Personally I like that set up more than a 1" drop all around. Either or, your car looks great.

teck · 04-24-2011, 08:02 PM

looks like its sitting up high all the way around, especially the back , id take it back to where you got it installed

04-15-2011, 12:47 AM	#1
cyberLS Drives: 2010 Cyber Grey LS Join Date: Mar 2010 Location: Santa Clara Posts: 2,224 View My Garage	Install question I just got my eibach lowering springs installed and it seems like my car has a rake rather then sitting even like the others that i have seen? could they have switched the springs and put 1.4 in the front and 1.0 in the back. and also will it do damage to the car. It has been about three days but i havent drove it more then 20 miles since.

04-17-2011, 03:59 AM	#2
2010rod JAWS Drives: 2010 2SS Silver Ice Metallic Join Date: Aug 2009 Location: Orange city Posts: 1,316 View My Garage	Looks good to me. What kind of springs did u go with? Eibach. Got it! __________________ Last edited by 2010rod; 04-18-2011 at 12:14 AM.

04-17-2011, 11:22 PM	#3
caverman Drives: '69 SS Convertible Join Date: May 2009 Location: DFW, TX Posts: 7,111	I thought Eibach was 1" all around. Here is my Hotchkis with 1" drop. Attached Images __________________ *-2010 Camaro* 2SS \| M6 \| VR w/White Stripes \| 1 3/4" KOOKS - 3" Magnaflow \| LPE 3.91 gears \| ADM tuned \| Halltech w/ADM Scoop \| Spohn/BMR Trailing Arm/Toe Rod \| BC Coilovers\| Pedders FE4 ZL1 swaybars \| Cradle/Diff/Radius Rod bushings \| VMax TB \| Morimoto Projectors \| MGW shifter \| Red Calipers Build Journal

04-18-2011, 02:30 AM	#4
steeleshark2 Drives: 2010 Transformer 1SS Camaro Join Date: Nov 2009 Location: Kingsland, Ga Posts: 2,553 View My Garage	Mine are 1" all around. __________________ Build page:http://www.camaro5.com/forums/showth...77#post3083477

04-18-2011, 08:22 AM	#6
steeleshark2 Drives: 2010 Transformer 1SS Camaro Join Date: Nov 2009 Location: Kingsland, Ga Posts: 2,553 View My Garage	Are you on a flat surface? I do see some extra gap on the rear tire. __________________ Build page:http://www.camaro5.com/forums/showth...77#post3083477 Last edited by steeleshark2; 04-18-2011 at 09:32 AM.

04-18-2011, 08:12 AM	#5
Jaysin Drives: 2015 Chevrolet SS Join Date: Jul 2010 Location: St. Louis, MO Posts: 341	I agree, it looks like it needs to come down in the back.

04-18-2011, 08:47 AM	#7
The Stig knows 2 facts about ducks Drives: ...and they're both wrong Join Date: Aug 2009 Location: The HMS Invincible Posts: 25,072 View My Garage	Apex sells a split drop springs set (1.4 in the front and 1 in the back). Personally I like that set up more than a 1" drop all around. Either or, your car looks great. __________________

04-24-2011, 08:02 PM	#8
teck Drives: 2010 v6 camaro Join Date: Dec 2009 Location: NJ Posts: 25	looks like its sitting up high all the way around, especially the back , id take it back to where you got it installed

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PFADT DROP SPRING INSTALL QUESTION ...	BLACOWT	Suspension / Brakes / Chassis	14	04-06-2011 12:48 PM
BBK header Install question Brand new 2011 2LT RS	willyd	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	8	03-14-2011 11:13 PM
Atak is on the way! Install question	zerox	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	5	07-02-2010 11:36 AM
Spring install and Bumpstop question	caverman	Suspension / Brakes / Chassis	3	12-30-2009 11:33 PM
SLP side gills...Install question	newagemuscle	Cosmetics and Lighting Modification Discussions	2	12-26-2009 02:44 PM