Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Bigwormgraphix
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > General Camaro Forums > Regional Forums > USA - Texas


Reply
 
Thread Tools
Old 04-25-2011, 03:58 AM   #1121
COPZ
 
COPZ's Avatar
 
Drives: 2011 SYNERGY GREEN 1SS
Join Date: Dec 2010
Location: TEMPLE, TX
Posts: 140
Quote:
Originally Posted by Invidia View Post
Side note:

I was SOOOOOO close to getting my hands on some SGM door panels... JUST THE PANELS... but some bastard on ebay outbid me in the last 10 secs.... back to the drawing board
I saw those on ebay and thought what a good deal. Very seldom would you see the actual panels with the ABL pulled from a Synergy Green car. Sucks that you got outbid. I was going to bid just to have a extra set but did not. Keep trying and I will be on the look out for ya!
__________________
2011 Synergy Green 1SS/RS LS3
Synergy Green door panels along with dash trim.
SLP Headers, SLP X-Pipe, and SLP LM1.
Vararam CAI
SLP Wheels
SLP Splitter
ZL1 Grill, Rockers and Spoiler
Complete 2013 Hot Wheels conversion
COPZ is offline   Reply With Quote
Old 04-25-2011, 04:00 AM   #1122
COPZ
 
COPZ's Avatar
 
Drives: 2011 SYNERGY GREEN 1SS
Join Date: Dec 2010
Location: TEMPLE, TX
Posts: 140
I am in on the calender idea. May would be the month I would like. I see where Invidia likes May also so just put both the Syngery cars with May and Mia can just pose with both of them!
__________________
2011 Synergy Green 1SS/RS LS3
Synergy Green door panels along with dash trim.
SLP Headers, SLP X-Pipe, and SLP LM1.
Vararam CAI
SLP Wheels
SLP Splitter
ZL1 Grill, Rockers and Spoiler
Complete 2013 Hot Wheels conversion
COPZ is offline   Reply With Quote
Old 04-25-2011, 08:50 AM   #1123
NoSyT
It's a Three Six, Vee Six
 
NoSyT's Avatar
 
Drives: '12 AGM 2LT/RS & '14 Silverado LTZ
Join Date: Feb 2011
Location: Fort Leonard Wood, MO
Posts: 981
Quote:
Originally Posted by Invidia View Post
Side note:

I was SOOOOOO close to getting my hands on some SGM door panels... JUST THE PANELS... but some bastard on ebay outbid me in the last 10 secs.... back to the drawing board
You got hit by an ebay sniper! The ebay automatic bidding helps prevent that. Set it at you absolute max your willing to pay and you can snipe the snipers when they pull the last second bid.

I have to admit that I've sniped a few things on ebay in my day!
NoSyT is offline   Reply With Quote
Old 04-25-2011, 11:20 AM   #1124
RdRokt
 
RdRokt's Avatar
 
Drives: 2010 2SS RS
Join Date: Oct 2010
Location: Killeen, TX
Posts: 355
Send a message via Yahoo to RdRokt
Mia you need to find a fieldnof flowers for a backdrop. That would be saweeeeeet
__________________
RdRokt is offline   Reply With Quote
Old 04-25-2011, 11:45 AM   #1125
kunk1963
Inferno SS
 
kunk1963's Avatar
 
Drives: 2011 Inferno 2SS/RS
Join Date: Oct 2010
Location: Harker Heights, TX
Posts: 496
Hey Everyone, Hope all's having a Better day than I.... Well Just wanted to put in my .2 Cents on the Calendars which is an Awesome Idea but We need to set up an Actual meeting to discuss it all because if it's all done on here, things will get lost in translation etc.. Maybe we could all get together for Dinner one night (Besides a Fri Night) for whom ever wants to be in it to Really Discuss all the Issues, Aspects and Cost... Kunk
__________________

2012 Centennial Edition Corvette
2011 Summit White 2LT/RS
2011 Merlot Street Glide
2013 IOM ZL1 A6 w/Black Wheels, Order Pending
USAF Retired & Lovin Life one day at a time!!!!
kunk1963 is offline   Reply With Quote
Old 04-25-2011, 12:05 PM   #1126
Invidia
 
Invidia's Avatar
 
Drives: 2011 Synergy Green Camaro 2LT/RS
Join Date: Feb 2011
Location: Killeen, TX
Posts: 122
Send a message via Yahoo to Invidia
Quote:
Originally Posted by RdRokt View Post
Mia you need to find a fieldnof flowers for a backdrop. That would be saweeeeeet
This is now your mission: a field of flowers!!! I like the thought of both the RS and SS posing together...

March could even be our month since it has St. Patty's Day in it...

But I do agree that we need to sit down and have a talk about the calender to hash out whatever details and price and whatnot.
Invidia is offline   Reply With Quote
Old 04-25-2011, 02:30 PM   #1127
RdRokt
 
RdRokt's Avatar
 
Drives: 2010 2SS RS
Join Date: Oct 2010
Location: Killeen, TX
Posts: 355
Send a message via Yahoo to RdRokt
Your heritage grill needs to hurry up and get here!
__________________
RdRokt is offline   Reply With Quote
Old 04-25-2011, 04:09 PM   #1128
import_killa

 
import_killa's Avatar
 
Drives: 2SS IBM
Join Date: Jan 2010
Location: fort hood texas
Posts: 857
Quote:
Originally Posted by Invidia View Post
This is now your mission: a field of flowers!!! I like the thought of both the RS and SS posing together...

March could even be our month since it has St. Patty's Day in it...

But I do agree that we need to sit down and have a talk about the calender to hash out whatever details and price and whatnot.
Well we are all gonna be sitting and eating this Friday we can discuss it then if y'all like
__________________
1 7/8 AR headers, roto-fab CAI with radiator, fuse box, and valve cover, cam, upgraded fuel system with 85lb injectors, under drive pulley, TVS 2300 S/C, muffler delete, aftermarket wheels, AAC headlights fogs sidemarkers footwell dome and trunk lights.....That's 659.9 RWHP 611.9RWTQ

T
import_killa is offline   Reply With Quote
Old 04-25-2011, 04:13 PM   #1129
import_killa

 
import_killa's Avatar
 
Drives: 2SS IBM
Join Date: Jan 2010
Location: fort hood texas
Posts: 857
Well I got up early this morning and went to 21st cause it seemed that my car had lost its tune or it was just missing a little. I thought it was a miss and when he hooked it up the tune was still the same but they did find a cracked plastic hose that Connell said they fixed but didnt. They fixed it and I ordered 1000hp axels and clutch also pfadt drop springs. Maybe when everything gets in I can get a lift back since they'll need a cpl days to do it all.


Jlugo that black 1st gen that has been there well they finished it all up and it made 800rwhp


They also had another 5th Gen in there that someone bought used and it was modded he blew the tranny. 21st said that the auto tranny's aren't aren't holding up to the power like the manuals. Matt, the guy who did my build, said he couldnt believe that my clutch is holding up to the Hp im pushing. I told him when I jump on it the car will try to suck the clutch to the floor thats why im upgrading it
__________________
1 7/8 AR headers, roto-fab CAI with radiator, fuse box, and valve cover, cam, upgraded fuel system with 85lb injectors, under drive pulley, TVS 2300 S/C, muffler delete, aftermarket wheels, AAC headlights fogs sidemarkers footwell dome and trunk lights.....That's 659.9 RWHP 611.9RWTQ

T

Last edited by import_killa; 04-25-2011 at 04:30 PM.
import_killa is offline   Reply With Quote
Old 04-25-2011, 04:21 PM   #1130
RdRokt
 
RdRokt's Avatar
 
Drives: 2010 2SS RS
Join Date: Oct 2010
Location: Killeen, TX
Posts: 355
Send a message via Yahoo to RdRokt
Hey jeff next time you head up to 21st let me know, id like to tag along. Never been to their shop before
__________________
RdRokt is offline   Reply With Quote
Old 04-25-2011, 04:26 PM   #1131
import_killa

 
import_killa's Avatar
 
Drives: 2SS IBM
Join Date: Jan 2010
Location: fort hood texas
Posts: 857
Quote:
Originally Posted by RdRokt View Post
Hey jeff next time you head up to 21st let me know, id like to tag along. Never been to their shop before
ok sounds good you will like their shop and the people that work there. Very clean shop and the guys know their stuff and are very friendly. They also let you stand in the shop and watch them work on your car not many places do that. To me that confidence in their abilities
__________________
1 7/8 AR headers, roto-fab CAI with radiator, fuse box, and valve cover, cam, upgraded fuel system with 85lb injectors, under drive pulley, TVS 2300 S/C, muffler delete, aftermarket wheels, AAC headlights fogs sidemarkers footwell dome and trunk lights.....That's 659.9 RWHP 611.9RWTQ

T
import_killa is offline   Reply With Quote
Old 04-25-2011, 05:05 PM   #1132
kunk1963
Inferno SS
 
kunk1963's Avatar
 
Drives: 2011 Inferno 2SS/RS
Join Date: Oct 2010
Location: Harker Heights, TX
Posts: 496
[QUOTE=import_killa;3139935]Well I got up early this morning and went to 21st cause it seemed that my car had lost its tune or it was just missing a little. I thought it was a miss and when he hooked it up the tune was still the same but they did find a cracked plastic hose that Connell said they fixed but didnt. They fixed it and I ordered 1000hp axels and clutch also pfadt drop springs. Maybe when everything gets in I can get a lift back since they'll need a cpl days to do it all.


I knew it wouldn't take U that long to Drop it Jeff
__________________

2012 Centennial Edition Corvette
2011 Summit White 2LT/RS
2011 Merlot Street Glide
2013 IOM ZL1 A6 w/Black Wheels, Order Pending
USAF Retired & Lovin Life one day at a time!!!!
kunk1963 is offline   Reply With Quote
Old 04-25-2011, 05:08 PM   #1133
import_killa

 
import_killa's Avatar
 
Drives: 2SS IBM
Join Date: Jan 2010
Location: fort hood texas
Posts: 857
[/QUOTE]I knew it wouldn't take U that long to Drop it Jeff [/QUOTE]

nope to much air gets under it at 160-180
Did you and Jligo use the pfadt deop springs if so i can get those now and we can do em
__________________
1 7/8 AR headers, roto-fab CAI with radiator, fuse box, and valve cover, cam, upgraded fuel system with 85lb injectors, under drive pulley, TVS 2300 S/C, muffler delete, aftermarket wheels, AAC headlights fogs sidemarkers footwell dome and trunk lights.....That's 659.9 RWHP 611.9RWTQ

T
import_killa is offline   Reply With Quote
Old 04-25-2011, 05:16 PM   #1134
kunk1963
Inferno SS
 
kunk1963's Avatar
 
Drives: 2011 Inferno 2SS/RS
Join Date: Oct 2010
Location: Harker Heights, TX
Posts: 496
nope to much air gets under it at 160-180
Did you and Jligo use the pfadt deop springs if so i can get those now and we can do em[/QUOTE]

I bet!! Mine R the Pfadt Springs, I think Lugo's R Eibach Springs... Yeah we can do them, tools needed R 18mm, 21mm,& 24mm Sockets /Ratchet- Wrenches. Luckily Lugo had one 18mm wrench and I had a Big Crescent Wrench... It took us about 3.5-4 hrs...
__________________

2012 Centennial Edition Corvette
2011 Summit White 2LT/RS
2011 Merlot Street Glide
2013 IOM ZL1 A6 w/Black Wheels, Order Pending
USAF Retired & Lovin Life one day at a time!!!!
kunk1963 is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
C5 Owners Roll At Atlanta Motor Speedway musclecargirl USA - Southeast 48 10-18-2010 03:35 PM
Great Texas Dealer!!!!!! PonyMan USA - Texas 1 08-27-2010 09:00 AM
C5 Texas State croyal1974 USA - Texas 1 04-22-2010 08:47 AM
FAST FRIDAYS at Texas Motorplex Jekyll-N-Hyde USA - Texas 1 06-25-2009 02:30 PM
Texas Auto Writers Association hands 2010 Camaro the "2009 Car of Texas Award" Tran 5th Gen Camaro SS LS LT General Discussions 26 05-04-2009 10:13 PM


All times are GMT -5. The time now is 04:33 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2026, vBulletin Solutions, Inc.