20 inch Cragar style wheels? - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

NoSyT · 05-01-2011, 04:03 PM

Quote:

Originally Posted by HDRDTD

This is what I'm hoping to find in a 20" rim for both the front and rear wheels which I belive are different width's?
This site only seems to list them in 9" width only

http://www.cragarwheel.com/wheels/?i...irst=0&fid=all
Style 616B

HDRDTD, the problem you are running in to is that the Cragar 616B is a 6-spoke and 6 lug nut design. The Camaro is a 5 lug nut hub design. Even it was made in the right size, it wouldn't work because you can't bolt it on to the car.

The closest you will find are the Foose Legends and the AR Torq Thrust M as posted earlier in the thread.

HDRDTD · 05-01-2011, 04:20 PM

Quote:

Originally Posted by Dirty D

HDRDTD, the problem you are running in to is that the Cragar 616B is a 6-spoke and 6 lug nut design. The Camaro is a 5 lug nut hub design. Even it was made in the right size, it wouldn't work because you can't bolt it on to the car.

The closest you will find are the Foose Legends and the AR Torq Thrust M as posted earlier in the thread.

Thanks for the info. I didn't realise they were 6 lug.
Drat.

gahammerle · 05-01-2011, 04:28 PM

I would love to run some Cragars too. I did find some called Rocket Boosters that are similar. I want to see them in person first though.

Lakota005 · 05-01-2011, 04:32 PM

Recheck Crager Wheels I've been told that 20's are available. They make em for the Challenger and Mustang.

HDRDTD · 05-01-2011, 04:37 PM

Quote:

Originally Posted by Lakota005

Recheck Crager Wheels I've been told that 20's are available. They make em for the Challenger and Mustang.

Yes Cragar has 20x9's but for some reason I thought the wheels for a 2011 2SS/RS Vert were different width's front and back. Or am I mistaken.
I originally ordered the optional 21" Black painted wheels, and those were 20x9 front, and 20x10 rear.

If the stock 20" wheels for a 2SS/RS are 20x9 front and rear, then the Cragar's will work fine.

Oooops. I forgot (again), the Cragars are SIX bolt not the five bolt needed.

The search continues.

Fraxum · 05-01-2011, 06:17 PM

Quote:

Originally Posted by BackinBlackSS/RS

Here's my AR Torq-thrust M's

Wow. Nice. Not Crager S/Ses. But these black center TTs are really good looking on a black Camaro. I was going to search for lighter wheels but these look too good to pass up.

PercyJWellingtonIII · 05-01-2011, 07:07 PM

Quote:

Originally Posted by HDRDTD

Just got a new 2SS/RS Vert with factory wheels and tires, but I like the old fashioned Cragar wheels.
So far I haven't found anybody that has a 20" versions of the old Cragars. All I can find is up to about 17".

Does anybody make a 20" version that would fit my Vert

----------------------
I have been looking for a set for 2 months myself. But the poster talking about the ones that Nickey offers I have been eyeing those because they look pretty good. Probably will go with that when its time to replace my tires. But I am downsizing mine from 19 to 18".

BackinBlackSS/RS · 05-01-2011, 07:33 PM

Quote:

Originally Posted by Fraxum

Wow. Nice. Not Crager S/Ses. But these black center TTs are really good looking on a black Camaro. I was going to search for lighter wheels but these look too good to pass up.

Thank you. I love them.

HDRDTD · 05-01-2011, 07:37 PM

Quote:

Originally Posted by BackinBlackSS/RS

Thank you. I love them.

But they'd look even better on a triple black 11 2SS/RS Vert.

its a syn · 05-01-2011, 07:51 PM

Series 613 2 piece custom fit, don't know price but this is what i will be getting soon!!!! they are similar to the Cragar Series 612p and 612g except come in 20"

BackinBlackSS/RS · 05-01-2011, 08:02 PM

Quote:

Originally Posted by HDRDTD

But they'd look even better on a triple black 11 2SS/RS Vert.

AlohaBR · 05-01-2011, 08:54 PM

Quote:

Originally Posted by HDRDTD

Just got a new 2SS/RS Vert with factory wheels and tires, but I like the old fashioned Cragar wheels.
So far I haven't found anybody that has a 20" versions of the old Cragars. All I can find is up to about 17".

Does anybody make a 20" version that would fit my Vert

Have actually been talking to Cragar about this. They pulled the 20" they had ready for some reason and still have not decided on 18" either.
Their loss, I am looking at the American Torque Thrusts now, but really want the Cragars'.

TBone · 05-01-2011, 09:26 PM

What about these?

They are American Eagle Wheels Boss STYLE 338. They have 20's and 18's.

When I was ordering my TTM's @ Discount tire My guy showed these to me.

T.

its a syn · 05-01-2011, 09:48 PM

cragarwheel.comcheck out the 2-piece S/S soft lip all aluminum

05-01-2011, 04:28 PM	#17
gahammerle Drives: 2010 Camaro LS M6 Inferno Orange Join Date: May 2010 Location: Lebanon, OH Posts: 1,673	I would love to run some Cragars too. I did find some called Rocket Boosters that are similar. I want to see them in person first though. __________________ Gordy Injen CAI / Solo Mach-X LLT / Solo High-flow res-cats / Barton short shifter / RX Catch Can / RPI Gills / 35% tint / LED Footwell Lighting Front & Rear / Pedders Street 1 / Pedders steering rack bushing / SS struts / Pfadt drop springs / VMax Ported Throttle Body / Spohn Toe Rods / Spohn Trailing Arms / Trifecta Tune / MACE 25mm Intake Spacers Find me on Facebook: http://www.facebook.com/gahammerle

05-01-2011, 04:32 PM	#18
Lakota005 Drives: 2010 Terrain Join Date: Oct 2010 Location: Tucson,AZ Posts: 15	Crager SS Wheels Recheck Crager Wheels I've been told that 20's are available. They make em for the Challenger and Mustang.

05-01-2011, 07:51 PM	#24
its a syn B.O.D. 02/16/10 Drives: 2010 SGM Sp. Edition 2017 RS Conver Join Date: Jun 2010 Location: Albia,Iowa Posts: 3,959 View My Garage	Series 613 2 piece custom fit, don't know price but this is what i will be getting soon!!!! they are similar to the Cragar Series 612p and 612g except come in 20" __________________

05-01-2011, 09:26 PM	#27
TBone Negative Camber Junkie Drives: 2010 1SS LS3/6MN ABM 1 of 23 Join Date: May 2009 Location: ChiTown, IL Posts: 1,824	What about these? They are American Eagle Wheels Boss STYLE 338. They have 20's and 18's. When I was ordering my TTM's @ Discount tire My guy showed these to me. T. __________________ "Horsepower is something that looks great in a Magazine article, but suspension is what actually gets you around the track fast.." Jack Olsen The drag strip is like sniffing glue, it's cheap, it's a decent buzz, it doesn't last long and they are all the same. Road racing is like China White Heroin, the buzz is stronger, the high lasts for hours, it's extremely addictive and they are all different. I can't wait for my next Track fix. DA HAWKS OWN DA CUP!!!!!

05-01-2011, 09:48 PM	#28
its a syn B.O.D. 02/16/10 Drives: 2010 SGM Sp. Edition 2017 RS Conver Join Date: Jun 2010 Location: Albia,Iowa Posts: 3,959 View My Garage	cragarwheel.comcheck out the 2-piece S/S soft lip all aluminum __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What song are you listening to right now	Muscle Master	Off-topic Discussions	6760	11-08-2025 02:54 AM
18" inch wheels fit on ss?	Jakefeb3	Wheels and Tires Talk Sponsored by The Tire Rack	29	02-03-2020 03:22 PM
20 inch polished wheels	atti2ude	Wheels / Tires	21	04-28-2010 12:54 PM
3 18 inch Heritage steel wheels for sale.	camaro guy	Wheels and Tires Talk Sponsored by The Tire Rack	0	03-02-2010 10:28 PM
OEM style wheels	jamesc1123	Wheels and Tires Talk Sponsored by The Tire Rack	1	09-25-2009 05:27 PM