El Paso Chapter of Camaro5 - Page 110 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

CamaroApa · 05-19-2011, 10:42 PM

Quote:

Originally Posted by mws444

Aw Man....Still carless. I am going to give ADM a call today and see what is going on with it. It will probably be at least two more weeks to get the paint work done.
Cant wait to jump back into the local scene with my baby!

what you getting done to it brotha??

mws444 · 05-20-2011, 07:15 AM

Quote:

Originally Posted by CamaroApa

what you getting done to it brotha??

New chrome Maggie after losing mine at the fest. Also going with a race gas tune for 111 octane. Finally starting to do some appearance mods, to make it stand out a little. Going to add some ghost stipes.

PIANOMN · 05-20-2011, 09:06 AM

Quote:

Originally Posted by K1SSRSS

Do you happen to know if Ivan is open on the weekends, also where is his shop located, I am planning on heading up this weekend. I hope I can at least pick up an exaust system or get one installed if I happen to take the car up. Thanks.

Ivan is always open lol! Sending you a more detailed PM....

viper1cobra · 05-20-2011, 11:54 AM

Quote:

Originally Posted by mws444

New chrome Maggie after losing mine at the fest. Also going with a race gas tune for 111 octane. Finally starting to do some appearance mods, to make it stand out a little. Going to add some ghost stipes.

Is that what happened on the Track or later?

viper1cobra · 05-20-2011, 12:48 PM

Quote:

Originally Posted by CamaroApa

anyone getting together this weekend....

What did you have in mind?

jose1003 · 05-21-2011, 02:37 PM

Quote:

Originally Posted by Gigachip

if you dont mind, what happened?

also, where would you recommend?

first it started with my bodykit took about 3 months to arrive, charf=ge one price then wanted to exchange for more money then with under body lighting, had order nitrous from him good didn't pay up front so just canceled it

but that was 9 years ago, that i know they closed the store for some time due to many people having the same problem

guess they opened it again, hope they give better service
let me know about your experience there

Quote:

Originally Posted by Char1ieone

Now, was it the shop or the euro that was the bad experience? OOOOOOOOH, that's right I went there hahaha!

Lol, had a nice eclipse

mws444 · 05-21-2011, 08:00 PM

Quote:

Originally Posted by viper1cobra

Is that what happened on the Track or later?

Yep, thought it was a tire, heck we all looked it over including the engine no one noticed. I knew something was wrong when I did a run on the strip, Lingenfelter guys spent about 20 minutes on it til they noticed the rear drive belt and the pulley off.
Oh well, good time for more mods and to build a better car!

viper1cobra · 05-24-2011, 10:19 AM

Quote:

Originally Posted by mws444

Yep, thought it was a tire, heck we all looked it over including the engine no one noticed. I knew something was wrong when I did a run on the strip, Lingenfelter guys spent about 20 minutes on it til they noticed the rear drive belt and the pulley off.
Oh well, good time for more mods and to build a better car!

Good luck, and Happy Modding.

Bigger, Better, Faster, and Stronger

Char1ieone · 05-26-2011, 09:22 AM

Hey, is anyone up to do a cookout next Saturday on the 4th? We can all meet up with eachother and drive to a park either in LC or EP and grill some burgers, hot dogs and such.

mws444 · 05-26-2011, 07:39 PM

Finally got my dyno report back, looks ike my car just went up on the fun scale! Going to have to wait on the paint though, kinda running out of time. I have to be in Houston next weekend so I figure I might as well run up to Dallas and get my car then swing down to Houston. They are having a Camaro show in Kemah on Sat.....so you know I gotta go!

viper1cobra · 05-27-2011, 10:04 AM

Quote:

Originally Posted by Char1ieone

Hey, is anyone up to do a cookout next Saturday on the 4th? We can all meet up with eachother and drive to a park either in LC or EP and grill some burgers, hot dogs and such.

That is my Son's Graduation.

Quote:

Originally Posted by mws444

Finally got my dyno report back, looks ike my car just went up on the fun scale! Going to have to wait on the paint though, kinda running out of time. I have to be in Houston next weekend so I figure I might as well run up to Dallas and get my car then swing down to Houston. They are having a Camaro show in Kemah on Sat.....so you know I gotta go!

Have fun, and take care. Good Luck in the Car Show.

ADM Performance is where everyone in Texas goes for Supercharging needs.

PIANOMN · 05-27-2011, 06:49 PM

Quote:

Originally Posted by Char1ieone

Hey, is anyone up to do a cookout next Saturday on the 4th? We can all meet up with eachother and drive to a park either in LC or EP and grill some burgers, hot dogs and such.

I may show up if you guys do something! Keep me posted!

viper1cobra · 06-01-2011, 10:00 AM

Quote:

Originally Posted by Char1ieone

Hey, is anyone up to do a cookout next Saturday on the 4th? We can all meet up with eachother and drive to a park either in LC or EP and grill some burgers, hot dogs and such.

What time are you meeting?

I may be able to make it if it is after noon.

nacho478 · 06-01-2011, 05:53 PM

I know you all were talking about Saturday but because of my work schedule Sundays work better for me. Just throwing that out there for the next time.

05-26-2011, 07:39 PM	#1536
mws444 Drives: 701 RWHP Lingenfelter/Pedders Beast Join Date: Apr 2009 Location: El Paso Posts: 2,973	Finally got my dyno report back, looks ike my car just went up on the fun scale! Going to have to wait on the paint though, kinda running out of time. I have to be in Houston next weekend so I figure I might as well run up to Dallas and get my car then swing down to Houston. They are having a Camaro show in Kemah on Sat.....so you know I gotta go! Attached Images __________________ Lingenfelter forged balanced and blueprinted LS3, Maggie TVS 2300 LPE 9.5" Rearend 3.73,LPE dual disk clutch,10/14 rib belt drive, MTI shifter,RPM Level VI,Corsa stainless cat back, Racing Brake Rotors, LPE calipers, LPE twin fuel pumps, American Racing long tube headers, GT9 cam Port and polished heads and an ADM majic tune. 701 RWHP,Fully Pedderized w/complete bushings and Sportsryder Supercar Remote resevior coilovers. CCW 505t's Nitto Invo's and DR's Beware of the LPE Brotherhood!

06-01-2011, 05:53 PM	#1540
nacho478 Drives: 2011 2SS/RS Join Date: Apr 2011 Location: San Antonio, TX Posts: 7	I know you all were talking about Saturday but because of my work schedule Sundays work better for me. Just throwing that out there for the next time. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
South East Camaro5 Chapter Meet	GTAHVIT	USA - Southeast	238	05-25-2010 05:01 PM
What VIN is yours?	UCF w00t	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	346	03-29-2010 06:55 PM
Laws Protecting Consumers for Aftermarket Parts	strauchpete	Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum	9	01-17-2010 09:31 AM
IMPORTANT Part 1 Warranty Disputes	Zeus	Camaro Issues / Problems \| Warranty Discussions \| TSB and Recalls	11	08-25-2009 12:37 PM
Pre-packaged chap11, sounds like a good plan	Design1stCode2nd	General Automotive + Other Cars Discussion	2	11-26-2008 11:03 PM

05-26-2011, 09:22 AM	#1535
Char1ieone Fear the Red Bow Tie Drives: 2010 Black Camaro 2SS/RS LS3 Join Date: Jun 2009 Location: La Mesa/Las Cruces, NM & El Paso, TX Posts: 1,762 View My Garage	Hey, is anyone up to do a cookout next Saturday on the 4th? We can all meet up with eachother and drive to a park either in LC or EP and grill some burgers, hot dogs and such.