Just finished my supercharger build... - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Silver Ice · 05-29-2011, 03:37 AM

Sweet

Z_Rocks · 05-29-2011, 11:21 AM

Quote:

Originally Posted by SSCeejay

I am a little worried to bring it out to the strip club right now.

Whaaaaat? No strip club?

old motorhead · 05-29-2011, 03:40 PM

Gorgeous. If the wife sees that, me and bank acct are in trouble

Cam specs and what size pulley are you running?

MRGOODWRENCH3 · 05-29-2011, 05:23 PM

The pulley is stock size, 7psi. Cam specs are undisclosed.

bob vogel · 05-29-2011, 05:35 PM

very clean looking car. you'll have fun with that one. i can hear the guy in the corvett know " ok look at the white camro ha ha" then as you blow his doors off...." what the f was that"

Z_Rocks · 05-29-2011, 05:40 PM

Quote:

Originally Posted by SSCeejay

And I couldnt be happier. The raw power and acceleration is jaw dropping to say the least, and the installation by 2edge performance in Costa Mesa, California was top notch. Chris at 2Edge is a great guy to work with and really knows his stuff. I posted this not really to show off, but more out of respect for the incredible work that he did. I also wanted to thank Mike over at Rotofab as well for his help in getting all of the custom painted parts out so quickly. They are incredible. What I decided to go with is:

Magnusson TVS 2300 Supercharger
TSP cam
Rotofab Air intake
JBA long tube headers
Flowmaster American Thunder exhaust
Snow Performance Methanol injection stage II kit
Kenne Bell Boost A Pump
Custom 2Edge performance spark plug wires
Techafx Hose Relocation Kit
Windshield Washer relocation kit
Custom painted Rotofab Engine covers
Custom painted Rotofab Radiator cover
Custom dyno tune

The final dyno pull resulted in 540 rwhp and 547 lbs/trq with 7 psi of boost. I was hoping to break the 600 hp mark and I am sure that I could if I went with a smaller pulley and bumped the boost up to 9 psi, however I am running on the stock internals and decided to play it safe.

For whatever reason, my favorite part of the car is to get a friend in the passanger seat without them really knowing what I did and listen to their reaction. Usually its a "what the hell" as the tires break loose in second gear. Anyways, I am glad to have joined the supercharged club! I will post some pics of the build a little later because the guys at 2edge deserve to show off their work!

The build is slated to be featured in Fastest Cars magazine as they had a photographer there documenting the build. Thanks for reading and enjoying the build with me!

Are you doing 100% meth or 50/50?

MRGOODWRENCH3 · 05-29-2011, 07:23 PM

The mix is 49% Meth, 51% water. I installed the dual nozzle kit to have the ability to adjust the injector sizes.

calbert1999 · 05-31-2011, 01:50 AM

Nice setup.

2010SSRSM6 · 05-31-2011, 01:00 PM

Is this an LS3 or L99 car? Did you have the covers and already have them painted or did 2Edge take care of that too?

SSCeejay · 05-31-2011, 06:21 PM

Quote:

Originally Posted by 2010SSRSM6

Is this an LS3 or L99 car? Did you have the covers and already have them painted or did 2Edge take care of that too?

It is an LS3 car. I handled the covers on my own because I wanted them to be painted a specific way. However Chris at 2edge was more than willing to order them for me if I wanted him to. I did have them delivered directly to his shop for installation.

2010SSRSM6 · 05-31-2011, 06:44 PM

Quote:

Originally Posted by SSCeejay

It is an LS3 car. I handled the covers on my own because I wanted them to be painted a specific way. However Chris at 2edge was more than willing to order them for me if I wanted him to. I did have them delivered directly to his shop for installation.

Looks amazing and thanks for the info!

GEEo · 05-31-2011, 06:47 PM

Looks great man!

Roto-fab 1 · 06-02-2011, 08:44 AM

That's a super clean looking install! I really like the white under the hood. Thanks for making our products part of your package.

Steves · 06-02-2011, 10:05 AM

Congrats, mine is at Pacific Fabrication getting her maggie fix. Will be taking it up to synergy for a tune and dyne right after

05-29-2011, 03:37 AM	#15
Silver Ice Drives: 2010 Camaro 2ss-rs Join Date: Jan 2010 Location: RI Posts: 845 View My Garage	Sweet __________________ Pfadt drop springs, Pfadt sway bars Pfadt end links Pfadt rear tie rods Pfadt rear trailing arms Pfadt rear lower control arm reinforcement bracket Kooks Long tube headers and high flow cats Airaid Cold air intake Magnaflow catback exhaust Mti short throw shifter Jannetty tune

05-31-2011, 01:50 AM	#22
calbert1999 Camaro SS Lover Drives: 2010 Camaro 2SS/RS Black IOM Join Date: Jun 2010 Location: Toronto, Ontario (Canada) Posts: 2,862	Nice setup. __________________ 2010 Camaro SS, P1SC SuperCharged Livernois LSX429ci., 1 7/8" LT Headers, full 3" MBRP exhaust, SPI built/tuned, a total

05-31-2011, 01:00 PM	#23
2010SSRSM6 Drives: My wife crazy with my C5 usage. Join Date: Apr 2009 Location: DFW Posts: 6,553 View My Garage	Is this an LS3 or L99 car? Did you have the covers and already have them painted or did 2Edge take care of that too? __________________ UNDER CONSTRUCTION......again......

06-02-2011, 10:05 AM	#28
Steves Drives: 2011 Camaro SS RS Join Date: Jan 2011 Location: Gilroy, Ca Posts: 31	Congrats, mine is at Pacific Fabrication getting her maggie fix. Will be taking it up to synergy for a tune and dyne right after __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Torq's latest Whipple Supercharger build, big power inside!	Erik@Torq	Forced Induction - V8	62	01-06-2012 12:01 PM
The 2011+ Mustang Thread	GatorBlue371	General Automotive + Other Cars Discussion	11874	08-23-2011 01:30 PM
For Us Camaro VSixers... D3Cadillac Just Completed SuperCharger for 3.6L :435HP/430lb	Cmicasa the Great XvX	Forced Induction - V6	46	01-29-2011 12:24 PM
First Ever Kenne Bell Supercharger Install Special!!!	Total_Perf_Eng	Forced Induction	10	03-08-2010 11:24 AM
Vortech Supercharger Systems for 2010 Camaro Official Release	Brian@Vortech	Forced Induction - V8	98	02-20-2010 12:04 AM

05-29-2011, 03:40 PM	#17
old motorhead Drives: Maggie blown LS3 vette Join Date: Aug 2009 Location: SE TX Posts: 1,490	Gorgeous. If the wife sees that, me and bank acct are in trouble Cam specs and what size pulley are you running?

05-29-2011, 05:23 PM	#18
MRGOODWRENCH3 Account Suspended Drives: 2010 Camaro 2SS/RS Join Date: Feb 2011 Location: Park City, Utah Posts: 670 View My Garage	The pulley is stock size, 7psi. Cam specs are undisclosed.

05-29-2011, 05:35 PM	#19
bob vogel Drives: 2010 rs ss Join Date: Jan 2010 Location: calif Posts: 796	very clean looking car. you'll have fun with that one. i can hear the guy in the corvett know " ok look at the white camro ha ha" then as you blow his doors off...." what the f was that"

05-29-2011, 07:23 PM	#21
MRGOODWRENCH3 Account Suspended Drives: 2010 Camaro 2SS/RS Join Date: Feb 2011 Location: Park City, Utah Posts: 670 View My Garage	The mix is 49% Meth, 51% water. I installed the dual nozzle kit to have the ability to adjust the injector sizes.

05-31-2011, 06:47 PM	#26
GEEo OKCamaros Drives: 4 banger Diesel Join Date: Mar 2010 Location: Philippines Posts: 4,572	Looks great man!

06-02-2011, 08:44 AM	#27
Roto-fab 1 Drives: 16 Camaro SS w/ Roto-fab CAI Join Date: May 2009 Location: Arizona Posts: 2,682	That's a super clean looking install! I really like the white under the hood. Thanks for making our products part of your package.