06-13-2011, 05:14 PM | #1 |
Its all about the U
Drives: 2010 SGM Join Date: Mar 2010
Location: Miami
Posts: 1,671
|
ACS T3 Splitter: Looking for reviews
Im about to pull the trigger on this splitter, just wanted to know from those who own it or know some one who owns it , how they feel it about it. Is it durable? ground clearance? etc etc
any input will be appreciated thanks !
__________________
|
06-14-2011, 09:32 AM | #2 |
Drives: victory red black stripes 2ss rs Join Date: Nov 2010
Location: new york
Posts: 50
|
bump ^
|
06-14-2011, 10:38 AM | #3 |
460 RWHP 420 RWTQ
|
I've put it on my IBM. I had it painted the satin black option. Fitment is good. It appears durable and the design is good.
Installation is easy, and the use of expansion pins to secure it to the fascia works well. It is solid. Overall I am pleased, but clearance is impacted greatly. I am NOT lowered and still have to be extremely careful. -Dane
__________________
|
06-14-2011, 11:50 AM | #4 | |
QATAR 2022
Drives: black cts-V coupe a6 Join Date: Apr 2010
Location: doha-qatar ( middle east )
Posts: 983
|
Quote:
|
|
06-16-2011, 11:15 PM | #5 |
Its all about the U
Drives: 2010 SGM Join Date: Mar 2010
Location: Miami
Posts: 1,671
|
.
__________________
|
06-17-2011, 01:18 PM | #6 |
Its all about the U
Drives: 2010 SGM Join Date: Mar 2010
Location: Miami
Posts: 1,671
|
My car is lowered 1.4 and feel like its very close to the ground already, I want to know if I am making a mistake by purchasing this splitter. anybody else with the splitter's input will be very much appreciated thank you
__________________
|
06-17-2011, 01:37 PM | #7 |
COTW: 12/13/10
Drives: 1969 Camaro Join Date: Feb 2008
Location: Orange County, CA
Posts: 7,880
|
I don't have it but I think you will be wasting your money. That is probably one on the lowest splitters I have seen on the Camaro. Your car is already 1.4" lowered and this will probably bring it down another inch or two. I scrape my splitter and its only like half inch lower than stock and my car is lowered 1".
__________________
"Are you one of those boys who prefer cars to women? - I'm one of those boys that appreciates a fine body, regardless of the make." 1969 CAMARO JOURNAL: http://www.camaro5.com/forums/showthread.php?t=341239 | FACEBOOK: http://www.facebook.com/taylor.ryan.apt | GRAPHIC DESIGN: www.aptdesigns.net |
06-17-2011, 01:49 PM | #8 |
QATAR 2022
Drives: black cts-V coupe a6 Join Date: Apr 2010
Location: doha-qatar ( middle east )
Posts: 983
|
don't get it if you r going that low
|
06-17-2011, 01:57 PM | #9 | |
50th Anniversary Vert
|
Quote:
I love the look, but it is too low for my taste (and I am not lowered).
__________________
|
|
06-17-2011, 02:09 PM | #10 |
Its all about the U
Drives: 2010 SGM Join Date: Mar 2010
Location: Miami
Posts: 1,671
|
:( I really like/want this splitter ahhhhhhh this blows .. moneys tight right now so to buy this splitter and see it damaged or crack would be a shame... I have the sides of the oem GFX just looking to purchase the front so I can finally install.. Im torn idk what 2 do...I could go with the oem splitter but to purchase seperate from a vendor its close to $550 shipped which is out of the question.. and not too many people have the acs one so I was looking forward to owning it.. o well ... thanks for all the input so far ..
Would still like more feedback if any1 else on here owns or heard about this splitter
__________________
|
06-17-2011, 02:44 PM | #11 |
460 RWHP 420 RWTQ
|
Okay, have good and bad news...
Bad: scraped the sh*t out of the splitter last night. I was sooooo pissed!!! Lost my focus for one second coming out a car wash back onto the street.... Good: took some 400 grit sandpaper to it and it cleaned up pretty well. I will proceed with 800 grit then 1000 and repaint. I think it will be fine, but it still makes you want to puke when it happens. Again, I stand by my earlier post, don't get this one if you are already lowered. I am at stock height with 22's on and this still happened and I am extremely careful. Good luck. -Dane
__________________
|
06-17-2011, 02:53 PM | #12 |
Drives: 2010 Camaro 2LT VR/RS CGM Rally's Join Date: May 2009
Location: Palmyra, PA
Posts: 5,675
|
i would get it acs is a great company and makes great stuff.
__________________
Email: rdurso1@yahoo.com |
06-17-2011, 03:08 PM | #13 |
Est.1775
Drives: '15 Challenger Hellcat (sold) Join Date: Sep 2009
Location: SoCal
Posts: 5,502
|
I have it and owned it twice. Not because of damage but because I sold my Camaro, then re-bought my Camaro again, lol. So yeah, twice! So that should tell you something.
It definitely adds a complete different look and yes it does lower your car. I've wanted to lower my car as well but I can't due to the lip bringing the car extremely low. ACS makes great products. I ordered mine through GarysCustomz painted Black to match the car. You won't have any regrets on pulling the trigger. |
06-17-2011, 03:17 PM | #14 |
Drives: 2011 Camaro SS2 SW and IOM Stripes Join Date: Apr 2011
Location: Baton Rouge, La
Posts: 58
|
I like the T3 with the radiator cooling version. Sounds like a bonus feature. Would like a review on that one.
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Any interest in ACS prepainted T buckets or splitter? | Trackspec Motorsports | Cosmetics and Lighting Modification Discussions | 34 | 06-18-2011 11:02 PM |
Ground Effects with ACS Composite Front Splitter | Gnarlygianni | Cosmetics and Lighting Modification Discussions | 1 | 12-29-2010 06:32 AM |
FRUSTRATION!! bad day just got worse...blow out on hwy = no ACS splitter | caper | Cosmetics and Lighting Modification Discussions | 14 | 09-29-2010 03:59 PM |
Which ACS splitter did you buy? Cooling or not cooling? | inferno35 | Cosmetics and Lighting Modification Discussions | 4 | 06-22-2010 03:52 PM |
Sneak Peak Camaro V8 ACS Front Splitter | ACS Composite | Exterior Parts & Accessories | 126 | 06-15-2010 06:58 PM |