Installed my Pfadt drop springs but...

[Bbrock25]

Well my front was fine everything assembled correctly, spring setting in the correct perch etc. However my sway bar end link is sorta bent...not sure if that will effect the height on it or not?? I really hope it does so I can put a new one on and that fix my problem...I only drug it once and that was almost a year ago, and it didn't effect my height or anything on my stock springs so I'm not really sure if that's my problem. But it scraped the frame, and part of the sway bar (directly under the sway bar end link) So I'm sure that's how it got bent, as I'm the only one who has ever drove it, and that was the only time its been drug.

From ground to the bottom of the front fender on the low side/correct side (drivers side) is 28.5 inches, and on the passenger side is 29 and a quarter.


Bout to go check my rear and see if I can see anything...

[Whipped416]

installed mine this weekend with no problems at all.. didnt have to drive it..
i dont think the spring are sitting in the saddle your saddle might of turned and that will cause this.

[Bbrock25]

Well I took them back off and checked everything looks fine other then the sway bar end link...Still the passenger side is prolly 1/2 to 3/4 on an inch high sigh...So when I take it to get it aligned imma have him check everything again for me. I originally was going to have him do it, but he was gonna charge like 250 to put them on and align it lol...But I'll see what happens sigh...Thanks everyone for the help tho I appreciate it

[TJ91]

im thinking its the bushing then that caused this. Goodluck, hope you dont get raped. Im going in tomorrow to have my front spring looked at, hope they dont rape me on a price either.

[Bbrock25]

Lol I hear ya man...The guy I'm taking it to I've known for years and he wouldn't overcharge me or anything infact he's giving me a deal lol...His exact words was "I won't break you up too bad but I gotta make money" haha

[PfadtRacing]

Hey there! So definately get that endlink replaced ASAP. You're not going to cause any damage, but those endlinks should be perfectly straight to get the most effective use out of your front sway bar.

If you get a few minutes today please take a picture of your ride height, and maybe a shot with your wheels off the car. My feeling is that your car will settle over the next few days, but send us some pictures to info@pfadtracing.com and I will take a look for any installation issues that may be going on down there. There isn't a reason why your car should sit higher on one side than the other, so lets work together to get your issue taken care of!

[Bbrock25]

Yea I ordered a endlink today and it'll be here tomorrow, and I'll go take a couple pics of it when I can.

Thanks for your help man!

I'm hoping its nothing major.

[Bbrock25]

I sent ya some pics to that email.

Thanks again

[yotaman96]

You ever get this fixed? My passenger side rear has sat about 1/2" higher than my driver side ever since I installed the springs. Since I just installed new axles, I took that side apart again and checked to make sure everything was good. I can't find any issues and it still sits higher.

[OSOEZ4U2NV]

Check your tire pressure,LOL

[Whipped416]

lol... or your eyes.... as when i installed mine i thought one side was higher then another but the ground was not completely level....