Ram air heat extractor Hood - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

TRC-SS · 06-30-2011, 10:43 AM

Sweet, thanks...I like that. Its not too much different that stock (lines and height wise) but looks great with the vents and scoop

garcmol · 06-30-2011, 10:48 AM

Quote:

Originally Posted by TRC-SS

Sweet, thanks...I like that. Its not too much different that stock (lines and height wise) but looks great with the vents and scoop

A word of caution though. The cowl sits taller and rakes a little further back than the stock hood. So if you lift the wipers to clean the windshield or to change them the wiper arms will hit the cowl. The driver side is easy to move over the hood without touching, but there is no way to lift the passenger side wiper arm more than about an inch. Still enough room to clean and change a wiper though.

Oh and check out Mindz build thread. He has the same hood and pictures from about every angle imaginable.

FL1CK · 06-30-2011, 05:12 PM

TL;DR

Quote:

Originally Posted by Mindz

Since you're "salty"...here you go:

forplay · 06-30-2011, 05:23 PM

Quote:

Originally Posted by garcmol

A word of caution though. The cowl sits taller and rakes a little further back than the stock hood. So if you lift the wipers to clean the windshield or to change them the wiper arms will hit the cowl. The driver side is easy to move over the hood without touching, but there is no way to lift the passenger side wiper arm more than about an inch. Still enough room to clean and change a wiper though.

Oh and check out Mindz build thread. He has the same hood and pictures from about every angle imaginable.

Good info..thanks..

Seleya · 06-30-2011, 07:01 PM

just got mine back today..

*Mindz* · 06-30-2011, 07:39 PM

Quote:

Originally Posted by Seleya

just got mine back today..

That doesn't look like the rk sport hood.

USMCSSGT-RET · 06-30-2011, 09:13 PM

I had mine fitted at my body shop this week. The fit was great, but the shop manager said they had to block down both sides to prep them for paint. I even checked it out and it didn't seem to come from the factory "paint ready." Even so, it looks hot already...can't wait to get it back!

Seleya · 06-30-2011, 09:46 PM

sorry... was in the wrong place :(

*Mindz* · 06-30-2011, 09:55 PM

Not a bad thing. Looks great, but I was like

forplay · 06-30-2011, 11:08 PM

nothing comes paint ready unless your blind and have no use of your hands.!!!

.. just 2 more days and ill be stylin that hood....looks mean..sounds mean...and is mean !!! lmao

garcmol · 07-01-2011, 09:43 AM

Quote:

Originally Posted by forplay

nothing comes paint ready unless your blind and have no use of your hands.!!!

.. just 2 more days and ill be stylin that hood....looks mean..sounds mean...and is mean !!! lmao

Very cool. I think this hood will look great on the synergy green!

06-30-2011, 10:43 AM	#29
TRC-SS 700RWHP-650TQ Drives: 2011 Forged LS3 Supercharged/Cammed Join Date: Aug 2010 Location: Shrewsbury Massachusetts Posts: 5,269 View My Garage	Sweet, thanks...I like that. Its not too much different that stock (lines and height wise) but looks great with the vents and scoop __________________ View Build HERE>>>>>MY 2011 2SS/RS JOURNAL

06-30-2011, 07:01 PM	#33
Seleya Drives: 1974 camaro 2011 rally yellow Join Date: Aug 2010 Location: arkansas Posts: 18	just got mine back today.. Attached Images

06-30-2011, 09:13 PM	#35
USMCSSGT-RET Drives: '14 SIM 2LT/RS Vert Join Date: Aug 2010 Location: Concord, NC Posts: 1,412	I had mine fitted at my body shop this week. The fit was great, but the shop manager said they had to block down both sides to prep them for paint. I even checked it out and it didn't seem to come from the factory "paint ready." Even so, it looks hot already...can't wait to get it back! __________________

06-30-2011, 09:55 PM	#37
Mindz E.B.A.H. Drives: you wild... Join Date: Mar 2007 Location: In the happy padded room wearing a jacket that makes me hug myself... Posts: 18,420	Not a bad thing. Looks great, but I was like __________________ Blue Rush, 2010 SS [Car of the Week 3/22/2010] Traded in on...ZLZBUBB, 2013 ZL1

06-30-2011, 11:08 PM	#38
forplay Drives: 2011 2SS/RS LS3 Join Date: Apr 2011 Location: ohio Posts: 141	nothing comes paint ready unless your blind and have no use of your hands.!!!.. just 2 more days and ill be stylin that hood....looks mean..sounds mean...and is mean !!! lmao __________________ 2011 SS/RS M6 Synergy green 559RWHP...530RWTQ Mods: Maggie supercharger...LS9X Twin disk clutch..85lb Fast inj..ZL1 Fuel pump..,MSD BAP..Roto-Fab cold air..Hotchkis max chassis brace, strut brace,, sway bars front and rear ,HD end links.adj toe link,lower control arm,,trailing arm,, Norris catch can..XS Power 1 7/8 ss lt headers..3" cat delete..3"X pipe..XS 3" mufflers. Hurst shifter.. Lowering springs..22" Foose wheels. Boost/vac ..Fuel pressure gauge..GPS stereo Head unit, all speakers and amp 4 10" subs..Ram air hood.heat extractors .Custom leather interior.Escort 9500ci..

06-30-2011, 09:46 PM	#36
Seleya Drives: 1974 camaro 2011 rally yellow Join Date: Aug 2010 Location: arkansas Posts: 18	sorry... was in the wrong place :(

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
MPD1 "Z/28 style" ram air hood	Eric-MPD1.com	Exterior Parts & Accessories	665	09-10-2014 07:42 AM
Cold Air Inductions Intake System! ADM Performance Cold Air Scoop! & Packages!	AutoAgenda	V8 Bolt-Ons & Tunes	438	11-23-2013 11:49 PM
Roto-Fab \| Engine Covers - S/C \| Fuse Relay Cover \| Radiator Cover \| Billet Oil Cap+	AutoAgenda	Exterior Parts & Accessories	14	02-06-2013 09:43 PM
What do all the abbreviations mean?	CrzyGamr2	5th Gen Camaro SS LS LT General Discussions	77	12-07-2012 05:34 AM
K&N AirCharger and Typhoon System \| Best Prices \| Free Shipping!	JDP Motorsports	V8 Bolt-Ons & Tunes	175	09-04-2012 03:40 PM