Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
dave@hennessey
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > General Camaro Forums > Regional Forums > Canada


Reply
 
Thread Tools
Old 07-17-2011, 03:27 PM   #3249
RickRay
INJACC
 
RickRay's Avatar
 
Drives: 2010 CGM 2LT/RS AUTO
Join Date: Jan 2009
Location: Montreal (South Shore)Quebec, Canada
Posts: 6,519
Question???
My rear passengers side marker just stopped working!!! So I checked it out by putting the OEM one on & it works. So then I took the drivers side one off & tried it & it didn't work either So I put the passengers side on the drivers side & it worked....!!!!!! BUT the Oem one still works on the passengers side....
So both lights work on the Drivers side & both don't work on the Passengers ...BUT the OEM light does work on the Passenger side...

Anyone have this weird situation..
__________________
Member of 'Club Elite' #70
2LT/RS Auto / Solo HFC / Solo Mach X-LLT J-Pipe / JBA Headers Shorty
CAI - Cold Air Inductions / VMAX TB / Trifecta Tune
Hotchkis Max Strut Brace / Blade Dovetail Spoiler / Elite Catch Can
ACS T3 Hood Ports / T2 Bumper Ports / T2 Splitter / ACS T1 Led Light Kit
ACS Rockers / ACS Composite Hood Liner / ACS Upper Rear Quarter Ports
ACS Front Wheel Mud Flaps / ACS Rear Wheel Mud Flaps / Vitesse Throttle Controller
Pedders Drop Suspension / BMR Lower Control Arms / Style 41 ZL1 Wheels /
Oracle Afterburners / Oracle Concept SMD Side markers
Complete SS Brembo Brakes Set
RickRay is offline   Reply With Quote
Old 07-18-2011, 12:30 PM   #3250
camarorick

 
camarorick's Avatar
 
Drives: .
Join Date: Jan 2008
Location: .
Posts: 2,166
Quote:
Originally Posted by RickRay View Post
Question???
My rear passengers side marker just stopped working!!! So I checked it out by putting the OEM one on & it works. So then I took the drivers side one off & tried it & it didn't work either So I put the passengers side on the drivers side & it worked....!!!!!! BUT the Oem one still works on the passengers side....
So both lights work on the Drivers side & both don't work on the Passengers ...BUT the OEM light does work on the Passenger side...

Anyone have this weird situation..
Would need to take a look at your plug on the car... the Stock markers might have thicker connectors, so they have better contact ?... where's the video of your new setup ???


Hey B.A.B. !!!! I have some pics of your car @ SPI.... Spoke to Alain, he said your car should be ready this week The engine bay looks B.A. Do you want me to post the pics here ?
camarorick is offline   Reply With Quote
Old 07-18-2011, 01:32 PM   #3251
RickRay
INJACC
 
RickRay's Avatar
 
Drives: 2010 CGM 2LT/RS AUTO
Join Date: Jan 2009
Location: Montreal (South Shore)Quebec, Canada
Posts: 6,519
Quote:
Originally Posted by camarorick View Post
Would need to take a look at your plug on the car... the Stock markers might have thicker connectors, so they have better contact ?... where's the video of your new setup ???
The lights worked for over a year now...
No video yet...
__________________
Member of 'Club Elite' #70
2LT/RS Auto / Solo HFC / Solo Mach X-LLT J-Pipe / JBA Headers Shorty
CAI - Cold Air Inductions / VMAX TB / Trifecta Tune
Hotchkis Max Strut Brace / Blade Dovetail Spoiler / Elite Catch Can
ACS T3 Hood Ports / T2 Bumper Ports / T2 Splitter / ACS T1 Led Light Kit
ACS Rockers / ACS Composite Hood Liner / ACS Upper Rear Quarter Ports
ACS Front Wheel Mud Flaps / ACS Rear Wheel Mud Flaps / Vitesse Throttle Controller
Pedders Drop Suspension / BMR Lower Control Arms / Style 41 ZL1 Wheels /
Oracle Afterburners / Oracle Concept SMD Side markers
Complete SS Brembo Brakes Set
RickRay is offline   Reply With Quote
Old 07-18-2011, 02:09 PM   #3252
montreal2010yellow


 
montreal2010yellow's Avatar
 
Drives: 2 LT/RS YELLOW, AUTO., VIN NO. 602
Join Date: May 2010
Location: LAVAL (10 min. north of Montreal), CANADA
Posts: 3,526
Quote:
Originally Posted by RickRay View Post
The lights worked for over a year now...
No video yet...
Are you getting an error message like sidemarker light not working....I beleive that this message should appear when a bulb is burnt or not working.
__________________
T2 Facia, ACS TL1 Hood, ACS Winglets. G5CR CAI. Hotchsic Strut Brace and more...
montreal2010yellow is offline   Reply With Quote
Old 07-18-2011, 02:28 PM   #3253
RickRay
INJACC
 
RickRay's Avatar
 
Drives: 2010 CGM 2LT/RS AUTO
Join Date: Jan 2009
Location: Montreal (South Shore)Quebec, Canada
Posts: 6,519
Quote:
Originally Posted by montreal2010yellow View Post
Are you getting an error message like sidemarker light not working....I beleive that this message should appear when a bulb is burnt or not working.
No error message....
Quote:
Originally Posted by camarorick View Post
Would need to take a look at your plug on the car... the Stock markers might have thicker connectors, so they have better contact ?... where's the video of your new setup ???
I just found out what could be the problem. When my mechanics helper swopped the rear valance..the wire broke on the rear light & he souder the wires on backwards.. ..It happens...normally it doesn't matter for OEM lights but with the LED ones there is a + & -...Now we(I) know... Later I'll do the switch..hopefully that will be the solution.
__________________
Member of 'Club Elite' #70
2LT/RS Auto / Solo HFC / Solo Mach X-LLT J-Pipe / JBA Headers Shorty
CAI - Cold Air Inductions / VMAX TB / Trifecta Tune
Hotchkis Max Strut Brace / Blade Dovetail Spoiler / Elite Catch Can
ACS T3 Hood Ports / T2 Bumper Ports / T2 Splitter / ACS T1 Led Light Kit
ACS Rockers / ACS Composite Hood Liner / ACS Upper Rear Quarter Ports
ACS Front Wheel Mud Flaps / ACS Rear Wheel Mud Flaps / Vitesse Throttle Controller
Pedders Drop Suspension / BMR Lower Control Arms / Style 41 ZL1 Wheels /
Oracle Afterburners / Oracle Concept SMD Side markers
Complete SS Brembo Brakes Set
RickRay is offline   Reply With Quote
Old 07-18-2011, 02:55 PM   #3254
camarorick

 
camarorick's Avatar
 
Drives: .
Join Date: Jan 2008
Location: .
Posts: 2,166
Quote:
Originally Posted by RickRay View Post
No error message....

I just found out what could be the problem. When my mechanics helper swopped the rear valance..the wire broke on the rear light & he souder the wires on backwards.. ..It happens...normally it doesn't matter for OEM lights but with the LED ones there is a + & -...Now we(I) know... Later I'll do the switch..hopefully that will be the solution.
Told you it was the plug.... L.E.D.'s are polarity specific
camarorick is offline   Reply With Quote
Old 07-18-2011, 04:36 PM   #3255
RickRay
INJACC
 
RickRay's Avatar
 
Drives: 2010 CGM 2LT/RS AUTO
Join Date: Jan 2009
Location: Montreal (South Shore)Quebec, Canada
Posts: 6,519
Quote:
Originally Posted by camarorick View Post
Told you it was the plug.... L.E.D.'s are polarity specific
Took 2 min to fix....I push the 2 wires out of the plug and reverse them & Voila. It works now.
__________________
Member of 'Club Elite' #70
2LT/RS Auto / Solo HFC / Solo Mach X-LLT J-Pipe / JBA Headers Shorty
CAI - Cold Air Inductions / VMAX TB / Trifecta Tune
Hotchkis Max Strut Brace / Blade Dovetail Spoiler / Elite Catch Can
ACS T3 Hood Ports / T2 Bumper Ports / T2 Splitter / ACS T1 Led Light Kit
ACS Rockers / ACS Composite Hood Liner / ACS Upper Rear Quarter Ports
ACS Front Wheel Mud Flaps / ACS Rear Wheel Mud Flaps / Vitesse Throttle Controller
Pedders Drop Suspension / BMR Lower Control Arms / Style 41 ZL1 Wheels /
Oracle Afterburners / Oracle Concept SMD Side markers
Complete SS Brembo Brakes Set
RickRay is offline   Reply With Quote
Old 07-18-2011, 04:43 PM   #3256
camarorick

 
camarorick's Avatar
 
Drives: .
Join Date: Jan 2008
Location: .
Posts: 2,166
Quote:
Originally Posted by RickRay View Post
Took 2 min to fix....I push the 2 wires out of the plug and reverse them & Voila. It works now.
camarorick is offline   Reply With Quote
Old 07-18-2011, 08:27 PM   #3257
RickRay
INJACC
 
RickRay's Avatar
 
Drives: 2010 CGM 2LT/RS AUTO
Join Date: Jan 2009
Location: Montreal (South Shore)Quebec, Canada
Posts: 6,519
Just checked my PDIM & it is:
HD = CB
SW = CC
The TSB mentions that the Cx & DA should be replaced.
for the newer Version;
DB/DD
Will go see my GM guy soon for the UPDATE
__________________
Member of 'Club Elite' #70
2LT/RS Auto / Solo HFC / Solo Mach X-LLT J-Pipe / JBA Headers Shorty
CAI - Cold Air Inductions / VMAX TB / Trifecta Tune
Hotchkis Max Strut Brace / Blade Dovetail Spoiler / Elite Catch Can
ACS T3 Hood Ports / T2 Bumper Ports / T2 Splitter / ACS T1 Led Light Kit
ACS Rockers / ACS Composite Hood Liner / ACS Upper Rear Quarter Ports
ACS Front Wheel Mud Flaps / ACS Rear Wheel Mud Flaps / Vitesse Throttle Controller
Pedders Drop Suspension / BMR Lower Control Arms / Style 41 ZL1 Wheels /
Oracle Afterburners / Oracle Concept SMD Side markers
Complete SS Brembo Brakes Set
RickRay is offline   Reply With Quote
Old 07-18-2011, 09:23 PM   #3258
camarorick

 
camarorick's Avatar
 
Drives: .
Join Date: Jan 2008
Location: .
Posts: 2,166
Quote:
Originally Posted by RickRay View Post
Just checked my PDIM & it is:
HD = CB
SW = CC
The TSB mentions that the Cx & DA should be replaced.
for the newer Version;
DB/DD
Will go see my GM guy soon for the UPDATE
I have CB/CC also... Have an appointment tomorrow morning for this. I'll let you know " wazzzz uuupppp "
camarorick is offline   Reply With Quote
Old 07-18-2011, 10:05 PM   #3259
Sasso
 
Sasso's Avatar
 
Drives: 2011 Camaro 2SS/RS Hurst M6
Join Date: Mar 2011
Location: Dollard Des Ormeaux Que
Posts: 374
What's CB/CC
Sasso is offline   Reply With Quote
Old 07-18-2011, 10:11 PM   #3260
camarorick

 
camarorick's Avatar
 
Drives: .
Join Date: Jan 2008
Location: .
Posts: 2,166
Quote:
Originally Posted by Sasso View Post
What's CB/CC
Software version of the PDIM ( USB/radio hardware connection )... see this thread for details http://www.camaro5.com/forums/showth...108097&page=27 ..... DB/DD is the latest version, and it fixes all sorts of issues with the radio !!
camarorick is offline   Reply With Quote
Old 07-18-2011, 10:57 PM   #3261
69 Rebel

 
69 Rebel's Avatar
 
Drives: 2010 IBM 2SS/RS Auto
Join Date: Apr 2010
Location: Laval, Canada
Posts: 1,542
Quote:
Originally Posted by camarorick View Post
Would need to take a look at your plug on the car... the Stock markers might have thicker connectors, so they have better contact ?... where's the video of your new setup ???


Hey B.A.B. !!!! I have some pics of your car @ SPI.... Spoke to Alain, he said your car should be ready this week The engine bay looks B.A. Do you want me to post the pics here ?
Sure go ahead
__________________
Version I
Jannetty Racing 550 RWHP Street Brawler Package,
Powered by TVS2300 Maggie
http://www.camaro5.com/forums/showthread.php?t=100385

Version II
416ci stroker/4L80e
701rwhp 750rwtq
build and tuned by
SPI-Performance
69 Rebel is offline   Reply With Quote
Old 07-19-2011, 06:50 AM   #3262
RickRay
INJACC
 
RickRay's Avatar
 
Drives: 2010 CGM 2LT/RS AUTO
Join Date: Jan 2009
Location: Montreal (South Shore)Quebec, Canada
Posts: 6,519
Quote:
Originally Posted by Sasso View Post
What's CB/CC
With the radio on press the MENU Button for agout 8 seconds & the Radio Details will come up.
__________________
Member of 'Club Elite' #70
2LT/RS Auto / Solo HFC / Solo Mach X-LLT J-Pipe / JBA Headers Shorty
CAI - Cold Air Inductions / VMAX TB / Trifecta Tune
Hotchkis Max Strut Brace / Blade Dovetail Spoiler / Elite Catch Can
ACS T3 Hood Ports / T2 Bumper Ports / T2 Splitter / ACS T1 Led Light Kit
ACS Rockers / ACS Composite Hood Liner / ACS Upper Rear Quarter Ports
ACS Front Wheel Mud Flaps / ACS Rear Wheel Mud Flaps / Vitesse Throttle Controller
Pedders Drop Suspension / BMR Lower Control Arms / Style 41 ZL1 Wheels /
Oracle Afterburners / Oracle Concept SMD Side markers
Complete SS Brembo Brakes Set
RickRay is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
2nd meet & greet South West FL paultheman2007 USA - Southeast 3 07-06-2011 12:46 AM
2nd Annual Buyers & Builders Oshawa Meet & Greet - August 20-22 CanadianCamaro Canada 1575 11-26-2010 03:02 PM
HUGE Orange County Horsepower Meet, Greet, & PCH Cruise 03/07/10 redracer1 USA - California 18 03-09-2010 03:58 PM
Weekly MEET & GREET on Fridays - LAVAL RickRay Canada 94 09-26-2009 09:53 AM
Michigan FBody Meet & Greet, May 30th, Milford Michigan meissen USA - Great Lakes 23 05-30-2009 11:24 PM


All times are GMT -5. The time now is 02:22 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2026, vBulletin Solutions, Inc.