Max NOS in SS Camaro - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

nuk2 · 07-28-2011, 10:00 AM

I have a 2010 SS Camaro with the following engine mods :
- ARH Headers
- Vararam Air Intake
- Hushpower Cat-Back
- Customs tunes

I want to know the maximum NOS shot I can put without blowing my engine. I want to be safe.

Thanks

CyberPredator · 07-28-2011, 10:46 AM

150 is a good place to stop. But there are other companies besides NOS that have kits that will be a more tailored fit to your car like Nitrous outlet. I would try them over NOS.

east TX Muscle cars · 07-28-2011, 10:48 AM

we sell and install the nitrous outlet kits. they are made for the 2010+ camaro. exact fit plate kits with hard lines. love there kits. you wouldn't be disappointed if you went that route. you can spray 200-250 if you want BUT when spraying big shots so much can go wrong so fast, just like blowers at those power levels you HAVE to have a good fuel system to support it all.

we recommend 150 shots if your running basic plate kits with no safety switches or such.

nuk2 · 07-28-2011, 11:00 AM

I already got my kit. So 150shot would be safe?

Graham@N · 07-28-2011, 11:40 AM

Quote:

Originally Posted by nuk2

I already got my kit. So 150shot would be safe?

Which system? What octane are you going to run? What plugs? How much timing pulled?

I can certianly help, but I want to make sure I have all the information.

nuk2 · 07-28-2011, 11:45 AM

its a NOS Sniper system, running 94 octane, stock ls3 plug. Timming is just enough to not get a knock. We tune it by ourself at the shop with HP Tuner.
I want to buy your Nitrous Plate on your website. Does it fit with my kit?

Graham@N · 07-28-2011, 11:46 AM

Quote:

Originally Posted by nuk2

its a NOS Sniper system, running 94 octane, stock ls3 plug. Timming is just enough to not get a knock. We tune it by ourself at the shop with HP Tuner

100-125hp. It will need a br7ef plug and around 6-7* of timing pulled. That with recommended jetting would be a good starting point.

nuk2 · 07-28-2011, 12:10 PM

And is it possible to buy one of your plate? Does it fit my kit?

Heliwrench · 07-28-2011, 01:18 PM

SRT10KLLR · 07-28-2011, 01:20 PM

Their 90mm plate will fit your intake but depending on where/how you have your setup you may need new fuel and nitrous lines.

Where do you have your solenoids mounted and how long are your lines from the noids to the nozzle?

Graham@N · 07-28-2011, 01:40 PM

Quote:

Originally Posted by nuk2

And is it possible to buy one of your plate? Does it fit my kit?

Yes sir. The jetting will be different to some degree, but yes it will work fine.

Quote:

Originally Posted by SRT10KLLR

Their 90mm plate will fit your intake but depending on where/how you have your setup you may need new fuel and nitrous lines.

Where do you have your solenoids mounted and how long are your lines from the noids to the nozzle?

performance red line · 07-28-2011, 02:21 PM

Look nice, i'm looking for this too !

nuk2 · 07-28-2011, 02:25 PM

thanks and do you have it in stock or its only on order?

Detoxx03 · 07-28-2011, 02:46 PM

Your are not gonna be happy with yourself if you stick with the stock plugs. Thats why nitrous gets a bad name cause people don't know what they are doing then blame it on nitrous. Pull atleast 6* of timing and get a colder plug (ngk br7efs) please. Let us know how it goes.

07-28-2011, 10:00 AM	#1
nuk2 Drives: 2010 2SS Camaro Join Date: Jul 2011 Location: Quebec Posts: 56	Max NOS in SS Camaro I have a 2010 SS Camaro with the following engine mods : - ARH Headers - Vararam Air Intake - Hushpower Cat-Back - Customs tunes I want to know the maximum NOS shot I can put without blowing my engine. I want to be safe. Thanks

07-28-2011, 10:46 AM	#2
CyberPredator 50 Shades of Prey Drives: TT/SS Join Date: Oct 2010 Location: Between 10 and 20 PSI Posts: 777	150 is a good place to stop. But there are other companies besides NOS that have kits that will be a more tailored fit to your car like Nitrous outlet. I would try them over NOS. __________________ Futral Motorsports built and tuned

07-28-2011, 01:18 PM	#9
Heliwrench Drives: 2010 Black 1SS Join Date: Aug 2009 Location: Langley BC Posts: 666	__________________ 2010 Black 1SS LS3 M6 Power: Kook's 1 7/8" Long Tubes and 3" Exhaust, Injen Full Length CAI, Jannetty Tune Drivetrain: MGW Short Shifter, Street Slayer Twin Clutch, DSS 1 Piece Aluminum Driveshaft, DSS 1000HP Axles, BMR Pro and Delrin Diff Bushings Suspension: BMR Trailing Arms and Bushings, FE6 Swaybar Conversion With Pedders 27mm Front and 32mm Rear ZL1 Swaybars and Links Chassis: Hotchkis Chassis Max Brace, BMR Pro Cradle Bushings Exterior:: Shine by Adam's. ...and plenty more

07-28-2011, 01:20 PM	#10
SRT10KLLR Drives: 2010 Camaro 2SS/RS Join Date: Sep 2009 Location: Down South Posts: 1,497	Their 90mm plate will fit your intake but depending on where/how you have your setup you may need new fuel and nitrous lines. Where do you have your solenoids mounted and how long are your lines from the noids to the nozzle? __________________ 2005 Dodge Ram 2500 RCSB Thunder Road Hemi Sport w/STS Turbo 2004 Dodge Ram SRT-10 - Silver - Stock 2003 Chevy 1500 RCSB Stepside 400SS - 408 in now awaiting Turbo

07-28-2011, 02:21 PM	#12
performance red line Drives: buick grand national Join Date: Aug 2010 Location: valleyfield Posts: 89 View My Garage	Look nice, i'm looking for this too ! __________________ yellow baby 2SSRS and 8.90 sec v-6 buick grand national full weight car

07-28-2011, 10:48 AM	#3
east TX Muscle cars Drives: 2x 05 Vettes/65'AC cobra/68 camaro Join Date: Apr 2009 Location: LONGVIEW, TEXAS Posts: 845	we sell and install the nitrous outlet kits. they are made for the 2010+ camaro. exact fit plate kits with hard lines. love there kits. you wouldn't be disappointed if you went that route. you can spray 200-250 if you want *BUT* when spraying big shots so much can go wrong so fast, just like blowers at those power levels you HAVE to have a good fuel system to support it all. we recommend 150 shots if your running basic plate kits with no safety switches or such.

07-28-2011, 11:00 AM	#4
nuk2 Drives: 2010 2SS Camaro Join Date: Jul 2011 Location: Quebec Posts: 56	I already got my kit. So 150shot would be safe?

07-28-2011, 11:45 AM	#6
nuk2 Drives: 2010 2SS Camaro Join Date: Jul 2011 Location: Quebec Posts: 56	its a NOS Sniper system, running 94 octane, stock ls3 plug. Timming is just enough to not get a knock. We tune it by ourself at the shop with HP Tuner. I want to buy your Nitrous Plate on your website. Does it fit with my kit?

07-28-2011, 12:10 PM	#8
nuk2 Drives: 2010 2SS Camaro Join Date: Jul 2011 Location: Quebec Posts: 56	And is it possible to buy one of your plate? Does it fit my kit?

07-28-2011, 02:25 PM	#13
nuk2 Drives: 2010 2SS Camaro Join Date: Jul 2011 Location: Quebec Posts: 56	thanks and do you have it in stock or its only on order?

07-28-2011, 02:46 PM	#14
Detoxx03 ЯєŧąяĐ Єl¡m¡иąŧøя ™ Drives: 2008 Corvette Join Date: Oct 2010 Location: Woodward Avenue Posts: 876 View My Garage	Your are not gonna be happy with yourself if you stick with the stock plugs. Thats why nitrous gets a bad name cause people don't know what they are doing then blame it on nitrous. Pull atleast 6* of timing and get a colder plug (ngk br7efs) please. Let us know how it goes. __________________ D1SC Procharger 932/758 on E85 A Futral Motorsports Creation https://www.facebook.com/DetoxxAtomic

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Transcript of Camaro ZL1 Q&A Webchat with Chevrolet	Tran	Camaro ZL1 Forum - ZL1 Specific Topics	42	12-22-2017 04:42 AM
5th Gen Suspension -- The Book	JusticePete	Suspension / Brakes / Chassis	151	05-07-2015 05:52 PM
Does the v6 have enough power?	cstproductions	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	305	08-29-2012 09:27 PM
Modern Camaro Performance Parts - www.PartsTaxi.com	PartsTaxi.com	Sponsor Announcements / Giveaways / Contests	0	10-06-2010 04:26 PM