Cherry Bomb Exhaust

[Hellfighter]

Originally Posted by SDubATC

Has anyone had any Check Engine Light issues with this? I've heard about them from some of the other exhaust kits, was wondering about this one.

No engine light or anything, only thing that bugs me some what , i dont know if i tightened it too hard or so , but when i get in my car or out or start moving it has this weird noise to it, like a squeek or so, not like a break squeeking but idk how to explain , but other than that nothing bad has happened as far as i noticed.

[usa1camaro1969]

Put it up on ramps and make sure you've got clearance around all of the pipes. If it's squeaking it's rubbing somewhere. Places to look are the tunnel brace, rear suspension, and as funny as it sounds, that big rubber coupler for the driveshaft near the rear end yolk.

[Hellfighter]

Hmm i know all the parts but the driveshaft part, do you have a picture?

[usa1camaro1969]

If you climb underneath the car and look at the back of the driveshaft you will see a big round rubber piece that attaches to the driveshaft on one side and the rear end yolk on the other.
No pics. If you can't find it you can always do a search.

[Hellfighter]

Well USA i did it ha thanks to ya, i took off mid pipes not the x one, but the one after mufflers , re alighned the mufflers WD40'd and Greased up a couple things that might of squeeked, and after i get the car off the ramps, it sounds how can i say deeper idk how, no squeeks or anything ^_^ if any it improved hah. What a magical thing WD40 some Grease, Time and Re Installation can do. Thanks!

[cam fan]

video please!

[Hellfighter]

Ill make a video soon Cam Fan, i just need too find a place to do it at lol, im in somewhat area that *cops* dont like mufflers or loud things.

[Taintedveins]

Okay can any one post a compare contrast to the V6 set and the v8 set. i am looking at this and i like it for the quality i have heard about but i haven't heard it yet...

[Hellfighter]

Originally Posted by Taintedveins

Okay can any one post a compare contrast to the V6 set and the v8 set. i am looking at this and i like it for the quality i have heard about but i haven't heard it yet...

I will post a video of my V6 this weekend m8

[cam fan]

nice job hellfighter! That sounds great....oh an congratulations on graduating haha!

can we get a clip from the outside of a few standing revs?

['11CamaroLS]

anyone know about how long i might expect it to take if i have a shop install the v8 catback with welding? just so i know how much to save up for heh

[Hellfighter]

Originally Posted by '11CamaroLS

anyone know about how long i might expect it to take if i have a shop install the v8 catback with welding? just so i know how much to save up for heh

- For Fan i will make more clips lol just need too charge camera and wait till it starts raining and wash me car again ^_^, might has too wait till next week or weekend depending.

But Installing this baby is simple as icing a cake ;P bolt on, i dont know how much shops charge for welding but i would say roughly 250 - 400$ at most. And usually 2 - 3 Hrs alone , 1 - 2Hrs with a buddy for a DIY.

[zogster]

I'm interested in getting one of these for my Camaro. Where did you purchase yours at for $399 shipped? The cheapest I've found is about $440.

Also was wondering if anyone knows how these exhausts hold up in the salt that is put on the road when it snows? I live in Illinois, so we don't have a ton of snow, but we do get snow and the roads are salted. Obviously a stainless steel exhaust is going to hold up better, but will there be problems down the road due to the salt? I don't want to put this on and then have it rust away in a few years.

[gundaaniyan]

i think the price went up than before