**CAI Inc. Supercharger CAI Release!!** - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Apex Motorsports · 07-29-2011, 06:26 PM

I love new toys.

Sales @ CAI Inc · 07-31-2011, 01:37 PM

Quote:

Originally Posted by yotaman96

Unfortanetly, I already have a K&N intake and was planning to modify it or swap back to stock. Got any kind of trade in allowance? lol

Sorry man, try eBay lol!!

boilermaker · 08-03-2011, 07:07 PM

What CAD system do you use, Bill?

Love my CAI intake btw!! More power and better gas mileage (I have a air scoop too)

Zman12 · 08-04-2011, 11:52 AM

Bill,
I am new to the whole Camaro thing. I just purchased mine last week. So forgive my ignornace. But can you explain the benfits to this new system in comparision to the system that is already installed on the car I purchased. Here is a pic hopefully.

yotaman96 · 08-04-2011, 12:33 PM

Quote:

Originally Posted by Zman12

Bill,
I am new to the whole Camaro thing. I just purchased mine last week. So forgive my ignornace. But can you explain the benfits to this new system in comparision to the system that is already installed on the car I purchased. Here is a pic hopefully.

You already have the CAI system. Yours was modified to fit with the Whipple. You may see a slight gain by converting to the piping designed for the supercharger.

shl4Z28 · 08-10-2011, 05:47 PM

Hi Bill,
Will you be producing something for the Edelbrock E-Force SC?

Sales @ CAI Inc · 08-11-2011, 12:13 PM

Quote:

Originally Posted by boilermaker

What CAD system do you use, Bill?

Love my CAI intake btw!! More power and better gas mileage (I have a air scoop too)

Thanks!! We use a few programs, Solidworks is what we use the most I believe (I am not the engineer so he may use a few others as well)

Quote:

Originally Posted by yotaman96

You already have the CAI system. Yours was modified to fit with the Whipple. You may see a slight gain by converting to the piping designed for the supercharger.

Agreed.

Quote:

Originally Posted by shl4Z28

Hi Bill,
Will you be producing something for the Edelbrock E-Force SC?

Possibly, right now though its below a lot of other design priorities to be completely honest.

94guy · 08-11-2011, 03:15 PM

Quote:

Originally Posted by Zman12

Bill,
I am new to the whole Camaro thing. I just purchased mine last week. So forgive my ignornace. But can you explain the benfits to this new system in comparision to the system that is already installed on the car I purchased. Here is a pic hopefully.

my cai was modified the same as yours. zman12 look in the vendor seller feedback before you go further.

Sales @ CAI Inc · 08-11-2011, 03:17 PM

Quote:

Originally Posted by 94guy

my cai was modified the same as yours. zman12 look in the vendor seller feedback before you go further.

Yes please do so you can get the whole story, thanks!

SSBUSDRVR · 08-11-2011, 03:29 PM

Quote:

Possibly, right now though its below a lot of other design priorities to be completely honest.

:(
Do you have to redesign the entire unit or just the tube?
Going with the Eforce and hate to have to sell the intake and go with a competitor. :(Would just let it sit on the shelf if a mod comes out in a few months and go with the stock bottom box.

Sales @ CAI Inc · 08-11-2011, 03:33 PM

Quote:

Originally Posted by SSBUSDRVR

:(
Do you have to redesign the entire unit or just the tube?
Going with the Eforce and hate to have to sell the intake and go with a competitor. :(Would just let it sit on the shelf if a mod comes out in a few months and go with the stock bottom box.

Let me see what I can do here.

SSBUSDRVR · 08-11-2011, 03:45 PM

Wow thanks Bill for even just looking into it for the future.

Sales @ CAI Inc · 08-12-2011, 08:56 AM

Quote:

Originally Posted by SSBUSDRVR

Wow thanks Bill for even just looking into it for the future.

No problem. In the meantime you might want to check out one of the last posts on the following thread: http://www.camaro5.com/forums/showthread.php?t=164346

Gearhead440 seems to have modified his current set-up to work so you may want to talk to him. I can not officially say it will work, fit, or help, because we did not design it for that appliaction, but he seems pretty happy!!

Hope this helps man!!

shl4Z28 · 08-12-2011, 09:29 AM

Quote:

Originally Posted by SSBUSDRVR

:(
Do you have to redesign the entire unit or just the tube?
Going with the Eforce and hate to have to sell the intake and go with a competitor. :(Would just let it sit on the shelf if a mod comes out in a few months and go with the stock bottom box.

+1

08-03-2011, 07:07 PM	#17
boilermaker Drives: 2011 Camaro RS/2SS Blk/Blk Join Date: Aug 2010 Location: Fort Wayne, IN Posts: 33	What CAD system do you use, Bill? Love my CAI intake btw!! More power and better gas mileage (I have a air scoop too) __________________ Greg D. 2011 Camaro M6 SS/RS 1978 Corvette Auto L82 Ft. Wayne, IN

08-04-2011, 11:52 AM	#18
Zman12 Drives: 2010 Camaro 2SS Join Date: May 2011 Location: Gardner,Ks Posts: 490	Bill, I am new to the whole Camaro thing. I just purchased mine last week. So forgive my ignornace. But can you explain the benfits to this new system in comparision to the system that is already installed on the car I purchased. Here is a pic hopefully. Attached Images

08-11-2011, 03:45 PM	#26
SSBUSDRVR Drives: '11 2SS/RS IBM/BLK M6 Join Date: Mar 2011 Location: Central FL Posts: 3,746 View My Garage	Wow thanks Bill for even just looking into it for the future. __________________ '11 IBM 2SS/RS Built and Tuned by Vengeance Racing Vengeance PCM Vengeance Racing Mast Black Label LS7 Headed 416 ProCharger Stage II D1X Race ,Monster Triple,Alky Control Meth Inj, Forgestar F14 Drag Version and a bunch of other blah blah blah.838/688 at 12lbs Street Friendly

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Yellow Lexus Type Fog Lights?	phenixdragon	Cosmetics and Lighting Modification Discussions	37	05-21-2017 11:49 AM
Edelbrock E Force Supercharger with Free Shipping	Jason@Phastek	Forced Induction	7	12-25-2010 10:29 PM
Its JUST a V6	ROD1	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	26	06-29-2010 03:57 PM
Supercharging options available from BMC Performance!	Curt@BMCPerformance	Forced Induction	17	02-18-2010 08:17 PM
5th Gen Camaro LS3 info from Chevy Hi-Po...READ	TAG UR IT	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	295	03-07-2008 11:06 AM

07-29-2011, 06:26 PM	#15
Apex Motorsports Drives: 2000 Camaro SS Join Date: Feb 2010 Location: Louisville, Ky. Posts: 25,165	I love new toys.

08-10-2011, 05:47 PM	#20
shl4Z28 Drives: 2012 Nissan Xterra Pro-4x Join Date: Jan 2011 Location: Lost Wages, NV Posts: 329	Hi Bill, Will you be producing something for the Edelbrock E-Force SC?