What Did You Do To Your Camaro Today? - Page 204 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

brooks35 · 09-11-2011, 12:24 AM

Finally finished my engine detailing.

SSBUSDRVR · 09-11-2011, 12:57 AM

Looks great. Where did you get those covers? Great touch.

Bay Area SS · 09-11-2011, 08:13 AM

Had a cam package installed!!

calbert1999 · 09-11-2011, 01:05 PM

Quote:

Originally Posted by SSBUSDRVR

Looks great. Where did you get those covers? Great touch.

LS Coil Covers
Check out ----> http://www.holley.com/242-1.asp

jshaf · 09-11-2011, 03:17 PM

did a TPMS relearn, strangely the drives side rear was reading as the front passanger on the DIC. kept putting air in the front passanger tire and the drivers rear kept increasing PSI?? after a rechecking I figured out it had to be back wards did the relearn and now it shoing them correctly....weird

TURBOJ · 09-11-2011, 05:53 PM

VMAX throttle body

Deke736 · 09-11-2011, 06:07 PM

I installed my VR painted engine cover and emblem pros emblem on it. Tomorrow should be my CAI, Inc intake and later this week will be my LSR strut tower brace. Pics will follow by the end of the week.

DandD · 09-11-2011, 06:26 PM

I tried something a little different than the rest of you. I drove mine, it felt real good at 135.

Dan

Ladybugsmom · 09-11-2011, 06:34 PM

Nothing yet - but once the football game is over, time to wash off the gunk from yesterday's road trip...

doctorgpharmd · 09-11-2011, 08:04 PM

I started her up, just to hear her idle

010 Camaro SS · 09-11-2011, 08:32 PM

This past week Halo headlights * painted rear stock wing flat black...

brooks35 · 09-12-2011, 12:50 AM

Quote:

Originally Posted by SSBUSDRVR

Looks great. Where did you get those covers? Great touch.

They are the Holley LS Coil covers. They have been trimmed by the TECHAFX guys to fit the Camaro. I don't believe thay are being offered yet, pretrimmed for the camaro. It isn't a real bad job to fit them on the Camaro, just a little time consuming to get it right. After the trim / fit I removed them and took them to a buddies shop where he painted them metallic silver. I then had the emblems installed and then everything was cleared over.

brooks35 · 09-12-2011, 12:53 AM

Quote:

Originally Posted by calbert1999

LS Coil Covers
Check out ----> http://www.holley.com/242-1.asp

That looks great. I see you have the TECHAFX hose kits installed also. That makes such a huge improvement.

kcsr6 · 09-12-2011, 06:24 AM

Vararam intake installed.

09-11-2011, 12:24 AM	#2843
brooks35 Drives: 57Chevy TrailblazerSS 73Camaro Join Date: Aug 2009 Location: Michigan Posts: 341	Finally finished my engine detailing. Attached Images __________________

09-11-2011, 12:57 AM	#2844
SSBUSDRVR Drives: '11 2SS/RS IBM/BLK M6 Join Date: Mar 2011 Location: Central FL Posts: 3,746 View My Garage	Looks great. Where did you get those covers? Great touch. __________________ '11 IBM 2SS/RS Built and Tuned by Vengeance Racing Vengeance PCM Vengeance Racing Mast Black Label LS7 Headed 416 ProCharger Stage II D1X Race ,Monster Triple,Alky Control Meth Inj, Forgestar F14 Drag Version and a bunch of other blah blah blah.838/688 at 12lbs Street Friendly

09-11-2011, 08:13 AM	#2845
Bay Area SS Drives: 2010 rs/2ss Join Date: Mar 2011 Location: ca bay area Posts: 669 View My Garage	Had a cam package installed!! __________________ 1 7/8 long tubes full XS Power exhaust no cats, Rotofab CAI, PowderPro Ported TB, Hurst short throw, TSP 231 236 cam, tuned by Synergy Motorsports 454RWHP, 440 RWTQ. More to come!

09-11-2011, 03:17 PM	#2847
jshaf Montani Semper Liberi Drives: 2011 Black 2SS/RS w/ IOM stripes Join Date: Feb 2010 Location: Masontown, WV Posts: 4,841	did a TPMS relearn, strangely the drives side rear was reading as the front passanger on the DIC. kept putting air in the front passanger tire and the drivers rear kept increasing PSI?? after a rechecking I figured out it had to be back wards did the relearn and now it shoing them correctly....weird __________________ Stainless Works 1 7/8 Long Tude Headers, Stainless Works High Flow Cats, Stainless Works Retro Chambered Catback, Z/28 Air Intake, RDP Tuned, FR41 Chrome Rims, 1100W stereo, 35% Tint

09-11-2011, 06:34 PM	#2851
Ladybugsmom Older than I look.... Drives: 2010 VR Camaro 2SS/RS LS3 Join Date: Feb 2011 Location: Washington Posts: 6,481 View My Garage	Nothing yet - but once the football game is over, time to wash off the gunk from yesterday's road trip... __________________ High Heels and Fast Wheels!!

09-11-2011, 05:53 PM	#2848
TURBOJ Drives: 2011 2SS/RS, 1998 Z28 Join Date: May 2008 Location: Kaneohe, Hawaii Posts: 196	VMAX throttle body

09-11-2011, 06:07 PM	#2849
Deke736 COTW 12/3/12 Drives: 2012 Ashen Gray ZL1 Join Date: Aug 2011 Location: Glen Carbon, IL Posts: 3,279	I installed my VR painted engine cover and emblem pros emblem on it. Tomorrow should be my CAI, Inc intake and later this week will be my LSR strut tower brace. Pics will follow by the end of the week.

09-11-2011, 06:26 PM	#2850
DandD Drives: 2010 2SS and 2011 LS Join Date: Aug 2011 Location: Western burbs of the Motor City Posts: 628 View My Garage	I tried something a little different than the rest of you. I drove mine, it felt real good at 135. Dan

09-11-2011, 08:04 PM	#2852
doctorgpharmd Banned Drives: 2011 2SS/RS Silver Join Date: Jul 2011 Location: Morristown NJ Posts: 103	I started her up, just to hear her idle

09-11-2011, 08:32 PM	#2853
010 Camaro SS Drives: 2010 Camaro SS 2SS Join Date: Mar 2010 Location: Ottawa Ontario Canada Posts: 1,491	This past week Halo headlights * painted rear stock wing flat black...

09-12-2011, 06:24 AM	#2856
kcsr6 Drives: 2011 Black LS3 2SS/RS Join Date: Jul 2011 Location: Indiana Posts: 261	Vararam intake installed. __________________ 2011 2SS/RS, Torch Red Bow Ties, 5% Tint, Oracle Side Markers, Forgestar F14's, Pfadt lowering springs, Vararam Intake, VMax Throttle Body, Custom Grind Comp Cam 224/236 114, SLP Under Drive Pulley, Granatelli Wires, Kooks 1 7/8 LTH, Off-road pipes, 3" exhaust, Mike Norris Motorsports Tune 471 RWHP 449 RWTQ! Search for kcsr6 on YouTube for sound clips.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 08:33 PM
Major Pedders Event in Houston! Saturday, Jan 30th! Meet DMS	Info@PeddersUSA.com	USA - Texas	39	02-01-2010 01:48 PM
Answeres to questions I have stumbled on	dieseldave24v	5th Gen Camaro SS LS LT General Discussions	13	02-23-2009 07:56 PM