Join TEAM LLT social group

[RSokie]

Originally Posted by Krozzbow

I joined about 3 weeks ago in face book. Here is a few photos to share with the LLT Team.

P.S. I haven’t had the time to put my mods in “Bow” (Camaro) yet due to unfinished construction. So by spring of 2012 my “Bow” should be completed.

Welcome to the club !
Yeah post some progress pics we love to see them, I am sure they will be awesome!

[RSokie]

Originally Posted by Krozzbow

I joined about 3 weeks ago in face book. Here is a few photos to share with the LLT Team.

P.S. I haven’t had the time to put my mods in “Bow” (Camaro) yet due to unfinished construction. So by spring of 2012 my “Bow” should be completed.

Originally Posted by BSR-1

Next are my Idea pics. It's not real easy to see from the last set of pics but there is limited access to the intake runners, meaning that I will only be able to work, (smooth or reshape) about 1/3 of the actual runner in each case.
My Idea (not final at this time) is to remove the areas that I've outlined and put an X on, essentially removing the whole top of the runners.
This would allow me to work more like 3/4 of the runners.
The downside to this would be that not all runners would have the same length and they would be much shorter.
The affect of shorter intake runners would be that the powerband would be shifted to the higher rpm range.

It is always a concern when doing porting of any kind that you may lose bottom end (lower rpm) power. That being said, I've never lost anything that you'd actually miss, meaning that on motorcycles I've never lost anything above 3000rpms but you never run a motorcycle at that rpm range so the loss at that range is not a problem.

I wish I had two intakes to play with so I could test more than one Idea at a time.

Anyone here with car experience? I'd appreciate any input......be honest, if you think I'm an Idiot feel free to say so.

I never really noticed till you posted the pics of the intake that the casting of of our intakes is really rough! With that being said Porting and polishing as much as you can reach will be better than what you have now, by the time the flow reaches the rougher area it will not be deflected as bad as what you have now and may ever be rushing so fast that whatever roughness that is left from what cannot be reached will not be so much of an issue.
I ported and polished my edelbrock on my 350 and my lower end improved greatly and I never noticed any drop in power on the top end. I actually gained .02 on the track afterwards.
You should run some times before and after to see what you do gain or take it to a dyno for some real time numbers.

[RSokie]

I have not heard of a company making aftermarket intakes for our cars, has anyone else?

[BSR-1]

Originally Posted by RSokie

I have not heard of a company making aftermarket intakes for our cars, has anyone else?

Not that I've heard of either.
I wish I had the ability because I can see making a way better intake just off the top of my head.

[RSokie]

Originally Posted by BSR-1

Not that I've heard of either.
I wish I had the ability because I can see making a way better intake just off the top of my head.

I am really surprised edelbrock or another company has not yet. The earnings potential is there for it.

[jlauber588]

Originally Posted by RSokie

I have not heard of a company making aftermarket intakes for our cars, has anyone else?

Vararam makes a ram air intake only 4 the llt not the v8 yet

Sent from my DROID BIONIC using Tapatalk

[TonyNo]

He meant the manifold, not a cold air intake.

[BSR-1]

Originally Posted by jlauber588

Vararam makes a ram air intake only 4 the llt not the v8 yet

Sent from my DROID BIONIC using Tapatalk

They had one for the V8 first and only recently made one for the LLT.

[RSokie]

Originally Posted by TonyNo

He meant the manifold, not a cold air intake.

Yeah I should have been more clear. I am old school the manifold was always called the intake

[RSokie]

Originally Posted by jlauber588

Vararam makes a ram air intake only 4 the llt not the v8 yet

Sent from my DROID BIONIC using Tapatalk

I have not heard any feedback by the way on the vararam. I wonder how it is working out?

[TonyNo]

Mine seems to be great!

[RSokie]

Did you notice any HP gains or difference in sound?

[TonyNo]

I only have one trip to the strip so far, but, it's looking like 0.2-0.3 seconds off of my quarter time and a 2-3 MPH increase in my trap speed.

A dyno pull, just for grins, is coming up, but, I have no base line.

I can't tell a difference in sound except for the "thump" when I go WOT. I have been told that it sounds deeper. FYI, I have an MRT 2 axle-back.

[RSokie]

Thats pretty impressive for a air intake. I just wonder if it improves the gas mileage any since it breaths better now.