05-09-2010, 08:13 PM | #15 |
Drives: 2012 GMC Sierra Z71 4x4 Crew Join Date: Feb 2010
Location: San Antonio, Tx
Posts: 1,229
|
Ok, you made me look!
Damn, one of them was totally missing! Must have blown off when I was driving the speed limit! You can't see it with the hood closed. (passenger side by the way).
__________________
MBRP 3" CAT BACK, SLP SKIP SHIFT, COLD AIR INDUCTIONS INTAKE, INJEN PRE FILTER,
AAC LED PODS, CUSTOM COACH WORKS PAINT,PFADT LOWERING SPRINGS AND SWAY BARS, MRR HR-6 WHEELS, RPI DESIGNS C-6 HIGH RISE SPOILER(AKA RK SPORT 3 PIECE SPOILER) |
05-10-2010, 07:06 PM | #16 |
Matt and Lisa
Drives: 2010 Camaro 2SS/RS RJT Join Date: Feb 2010
Location: Ft Benning, GA
Posts: 40
|
I talked to the machine shop guy today...he said if the dealership sells them that it would be best to buy them there because it would cost around $150 for ONE. However, if we had enough people that needed them, the price would come down considerably.
I think I will just go to the dealer and buy some new ones and use rubber cement (or something similar) to keep them in place. Especially since you can't even see them unless the hood is open. |
05-18-2010, 01:48 PM | #17 |
So, I was washing my car last weekend and noticed I had one missing. Checked the other one and it was broken too. I went to dealer today, they have to order them, but they are getting me some under warranty.
Must be a Texas thing.
__________________
’10 SS/RS - RJT M6 - Ceramic Tint, Billet Bow ties, AAC Int/Trunk LEDs, SLP Blackwing, Corsa, Hawk HPS, Cags!
'65 Malibu SS |
|
05-18-2010, 02:52 PM | #18 |
Drives: ADM Built 740RWHP 2SS/RS Join Date: Feb 2010
Location: DFW
Posts: 255
|
I would think this would be a warranty issue.
|
05-18-2010, 03:20 PM | #19 |
Rolling along...
|
I'll find out tomorrow... Just noticed that I'm missing the one on the driver's side.
I've got to take the car in anyhow and have them fish for a couple of spoiler nuts that fell off...Thank god I had them do that service update back in November that was supposed to include "invisible" LOCTITE on the studs...idiots! Guess they just tightened the nuts up and didn't use LOCTITE.
__________________
|
05-20-2010, 05:28 PM | #20 |
Picked them up today. they offered to install, but I saw no need to wait. Service person handed them to me and I popped them on before I left.
they were covered by warranty, so they didn't cost anything. (well, other than two round trips to dealer.) I hope this is the last set, but I would bet not. I only got 2K miles out of the last set.
__________________
’10 SS/RS - RJT M6 - Ceramic Tint, Billet Bow ties, AAC Int/Trunk LEDs, SLP Blackwing, Corsa, Hawk HPS, Cags!
'65 Malibu SS |
|
05-21-2010, 03:39 AM | #21 |
Drives: 92 firebird,2010 camaro Join Date: May 2009
Location: Indianapolis,In
Posts: 362
|
going to check mine in the morning
|
05-27-2010, 11:09 PM | #22 | |
Rolling along...
|
Quote:
__________________
|
|
05-27-2010, 11:40 PM | #23 |
|
Both of mine broke.. I used electrical tape to tape them back down on the post.. Can't hardly tell..
|
05-30-2010, 03:33 PM | #24 |
Drives: 2010 SIM 2SS/RS MONSTER Join Date: Aug 2009
Location: LOS ANGELES
Posts: 1,506
|
My car has never seen the rain !
__________________
HP MONSTER' SOUTHERN CALIFORNIA BUILT, LMR CAI, CUSTOM GRIND CAM, CUSTOM BUILT CNC PORTED AND POLISHED HEADS, FAST 102MM INTAKE MANIFOLD,ARH LONG TUBES AND HIGH FLOW CATS, BIGGER INJECTORS, VALVES SPRINGS RETAINERS, MGW SHORT SHIFTER, EIBACH SPRINGS, FACTORY CHROMED WHEELS, BLACKED OUT EMBLEMS, BLACKED OUT ROOF,BLACKED OUT MARKERS, 3.5 INCH ELECTRONIC CUTOUTS, FLOWMASTERS, ZEX WET 150 SHOT, FOR A GRAND TOTAL OF =630 REAR WHEEL TORQUE ,AND 600 REAR WHEEL HORSEPOWER
MY JOURNALhttp://www.camaro5.com/forums/showth...02#post2023802 SOON TWIN TURBO SETUP |
06-30-2010, 08:39 PM | #25 |
Drives: 2010 Camaro - Synergy Edition Join Date: May 2010
Location: Kenner, LA
Posts: 58
|
__________________
Gregg G. - 2010 Synergy Edition
:fighting0040: Kenner, LA _________________________________________ My halo and grill Lighting - http://www.youtube.com/watch?v=lZgYRq8vP3g |
09-23-2011, 12:18 PM | #26 |
|
Hate bringing back old posts, but I just had my dealer's parts dept order (covered under warranty).
__________________
|
09-26-2011, 01:14 PM | #27 |
God Bless Dawson
Drives: Synergy for my Daughter Join Date: Feb 2010
Location: Texas
Posts: 3,057
|
I'm on my 5th one and I noticed it broke yesterday again.
Shoddy plastic piece. They warrantee it every time.
__________________
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Windshield problems | tilapia2005 | Camaro Issues / Problems | Warranty Discussions | TSB and Recalls | 8 | 07-28-2010 08:19 PM |
ENGINE COVER "SS" WHITE EMBLEM & POLISHED STAINLESS NAMEPLATE | Kirban Performance | V8 Bolt-Ons & Tunes | 0 | 03-04-2010 12:45 PM |
ENGINE COVER "SS" RED EMBLEM & POLISHED STAINLESS NAMEPLATE | Kirban Performance | V8 Bolt-Ons & Tunes | 0 | 03-04-2010 12:43 PM |
Windshield Wiper | B - GodZ | 5th Gen Camaro SS LS LT General Discussions | 2 | 03-02-2010 08:04 PM |
Save Over $160 on a Car Cover! | billjames | Wash/Wax/Detailing and Cosmetic Maintenance Parts | 0 | 01-13-2010 10:57 AM |