Just bought HP Tuners Standard kit. - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

tsears · 09-29-2011, 10:48 PM

Anyone use this? Any suggestions on wideband monitors?

Supercharged SS · 09-29-2011, 10:56 PM

Quote:

Originally Posted by tsears

Anyone use this? Any suggestions on wideband monitors?

I have an AEM Ugeo sideband in my trailblazer ss. You can hook it up to the lap top and log.

What happened? Did you decided, screw the tuners, I can do just as good?

tsears · 09-29-2011, 11:33 PM

Lol, well I figure since I can't work on my car mechanically, I might as well do play around with the software. I'm a Software Integration and Test Engineer for a couple of DoD programs. I may not know much now, but I think I can catch on pretty quick.

bill@hptuners · 09-30-2011, 01:26 PM

Congrats, I personally use an old school LM1 for its portability.

tsears · 09-30-2011, 01:44 PM

I returned my standard kit from Summit. Precision Motorsports has the Prokit and the LC1 for $800. Do you think that will suffice?

Supercharged SS · 09-30-2011, 01:51 PM

Quote:

Originally Posted by tsears

I returned my standard kit from Summit. Precision Motorsports has the Prokit and the LC1 for $800. Do you think that will suffice?

Yup! That's a great way to go.

tsears · 09-30-2011, 04:10 PM

Quote:

Originally Posted by Supercharged SS

Yup! That's a great way to go.

. Can't wait to tinker around with it!

camaro1 · 09-30-2011, 08:14 PM

PLX M-300 with narrow band output to run the pcm, no extra o2 bungs needed,, several cars running this unit with no issues

GEN-IV · 10-01-2011, 04:28 PM

AFX wideband.

tsears · 10-01-2011, 04:47 PM

Picked up a LC1 from Innovate.

Ryne @ CMS · 10-02-2011, 02:48 AM

i can set you up with some Configs for the scanner

Tampa Tuning · 10-02-2011, 11:27 AM

I have the LM-1 and the LM-2 which I move from vehicle to vehicle.
The LC-1 is great if you are going to keep it in one car.
www.TampaTuning.com

tsears · 10-03-2011, 09:31 AM

Quote:

Originally Posted by Ryne @ CMS

i can set you up with some Configs for the scanner

For sure. Email them to me.

nighttowl · 04-06-2012, 11:32 PM

Quote:

Originally Posted by tsears

I returned my standard kit from Summit. Precision Motorsports has the Prokit and the LC1 for $800. Do you think that will suffice?

smart move. the pro kit has 1.5 hour datalogging capability.

tuning without a datalog to go by is a bad idea.

09-29-2011, 10:48 PM	#1
tsears Drives: 2010 Camaro 2SS/RS - L99 - CGM Join Date: Apr 2010 Location: San Diego Posts: 849	Just bought HP Tuners Standard kit. Anyone use this? Any suggestions on wideband monitors? __________________ 2007 Corvette Z06 - Velocity Yellow Halltech \| Forgestar \| Bilstein

09-29-2011, 11:33 PM	#3
tsears Drives: 2010 Camaro 2SS/RS - L99 - CGM Join Date: Apr 2010 Location: San Diego Posts: 849	Lol, well I figure since I can't work on my car mechanically, I might as well do play around with the software. I'm a Software Integration and Test Engineer for a couple of DoD programs. I may not know much now, but I think I can catch on pretty quick. __________________ 2007 Corvette Z06 - Velocity Yellow Halltech \| Forgestar \| Bilstein

09-30-2011, 01:44 PM	#5
tsears Drives: 2010 Camaro 2SS/RS - L99 - CGM Join Date: Apr 2010 Location: San Diego Posts: 849	I returned my standard kit from Summit. Precision Motorsports has the Prokit and the LC1 for $800. Do you think that will suffice? __________________ 2007 Corvette Z06 - Velocity Yellow Halltech \| Forgestar \| Bilstein

09-30-2011, 08:14 PM	#8
camaro1 Drives: 550+RWHP 2010 camaro Join Date: Sep 2007 Location: wisconsin Posts: 1,588	PLX M-300 with narrow band output to run the pcm, no extra o2 bungs needed,, several cars running this unit with no issues __________________ 415ci stroker, TVS 2300 Magnacharger, cnc heads, cam, yank ss3200 converter, Kooks long tubes, Bwoody true cold air kit, ZL1 Pump, magnaflow 3" cat-back, lowering springs,BMR control arms and tie rod bars, 3.73 gears, diff mounts, RX can, ADM fuel controller

10-01-2011, 04:28 PM	#9
GEN-IV Right Cam Drives: 2010 LS3 / 79 Z28 Join Date: Jun 2009 Location: Maine Posts: 508	AFX wideband. __________________ 2010 2SS/RS M6 CGM E-Force + 2015 1LT V6/A6

09-30-2011, 01:26 PM	#4
bill@hptuners Drives: grand prix Join Date: Jan 2011 Location: NJ Posts: 72	Congrats, I personally use an old school LM1 for its portability.

10-01-2011, 04:47 PM	#10
tsears Drives: 2010 Camaro 2SS/RS - L99 - CGM Join Date: Apr 2010 Location: San Diego Posts: 849	Picked up a LC1 from Innovate. __________________ 2007 Corvette Z06 - Velocity Yellow Halltech \| Forgestar \| Bilstein

10-02-2011, 02:48 AM	#11
Ryne @ CMS Drives: 16 Camaro SS, 06 C6 Z06, 15 Sierra Join Date: Nov 2009 Location: Murrieta, CA Posts: 778	i can set you up with some Configs for the scanner Last edited by Ryne @ CMS; 10-02-2011 at 01:31 PM.

10-02-2011, 11:27 AM	#12
Tampa Tuning Account Suspended Drives: TAMPA TUNING FACEBOOK & INSTAGRAM Join Date: Oct 2010 Location: Tampa, Fl Posts: 3,044	I have the LM-1 and the LM-2 which I move from vehicle to vehicle. The LC-1 is great if you are going to keep it in one car. www.TampaTuning.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SOLO Performance Camaro CONVERTIBLE Cat-Back Exhaust Kit	GOINGSOLO2	V8 Bolt-Ons & Tunes	18	12-20-2011 07:17 PM
Introducing the Gforce Engineering fabricated 9" IRS kit	GFORCE1320	Transmission / Driveline	1	03-04-2011 11:25 AM
Rally Stripe Kit Install (Aftermarket)	JoeKay	Camaro DIY & HOW-TO instructions & discussions	4	09-29-2010 07:13 PM
New CMGS FS Camaro Kit just released	coolingmist	Forced Induction - V8	0	08-28-2010 11:09 AM
5202 (H16 ; 9009) Slim HID Kits !!! 09-Up Camaro Fog Light HID kits !!!	HID_Guy	Exterior Parts & Accessories	19	09-08-2009 02:07 AM