Why yes I work on the line in Oshawa - Page 25 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

1989-ZR-1 · 04-03-2009, 06:43 PM

OK.... So your ignoring me... How about this one:

Are there wheel locks on the wheels?

Arod · 04-03-2009, 06:43 PM

Mole,
After the car is produced, how long does a quality control inspection typically take?

Optimus Prime · 04-03-2009, 06:51 PM

Quote:

Originally Posted by the Mole

Thanks for all your concern. I am well aware of what can happen to me. I wouldn't intentionally sabotage myself.I have read the code of conduct expected of me and my fellow workers. I'm adding a disclaimer to my posts. It's a fine line we have drawn in the shop floor and I will do my best to keep you informed as well as protect myself. If I don't answer some of you questions don't be offended. I may just be ignoring you. jk. But now that I've got your attention...did you hear about hnlk nvengi ikfbedh psmjnsc ??eh

I guess that means no answer on the Hurst. Don't worry though, Mole, I know you're not maliciously ignoring us.

the Mole · 04-03-2009, 06:54 PM

Quote:

Originally Posted by 1989-ZR-1

OK.... So your ignoring me... How about this one:

Are there wheel locks on the wheels?

I don't know about wheel locks installed at the the factory. VIN specific questions are off limits.

Quote:

Originally Posted by Arod

Mole,
After the car is produced, how long does a quality control inspection typically take?

Time-lines vary. I can't give you specifics

1989-ZR-1 · 04-03-2009, 07:02 PM

Did you see many Orange Camaros today?

the Mole · 04-03-2009, 07:05 PM

Quote:

Originally Posted by 1989-ZR-1

Did you see many Orange Camaros today?

Yes they are a popular colour

1989-ZR-1 · 04-03-2009, 07:07 PM

That's good to know. How about the V6 ratio vs V8? 50/50?

the Mole · 04-03-2009, 07:14 PM

Quote:

Originally Posted by 1989-ZR-1

That's good to know. How about the V6 ratio vs V8? 50/50?

Where I am in the plant the motor is not in yet and the front fasia is not on yet so just by looking at them I couldn't tell.

2010 SS RS · 04-03-2009, 07:16 PM

Any talk of second shift or Saturdays? Or even pulling more off the impala line?

Caliman93230 · 04-03-2009, 07:20 PM

Mr. mole are the panels matching now. or do they have the ugly gap still? I hope it now looks like the panels on the camaro web site nice and smooth.

trm0002 · 04-03-2009, 07:30 PM

Quote:

Originally Posted by Caliman93230

Mr. mole are the panels matching now. or do they have the ugly gap still? I hope it now looks like the panels on the camaro web site nice and smooth.

Good question but we only saw the one car (unfortunately Hendriks) where the panels didn't appear to match. We didn't notice that on the CTF cars we saw nor the cars anyone saw at the shows around the nation. I rather doubt that it's a "standard" problem. I think we saw an isolated incident and read the worst into it.

the Mole · 04-03-2009, 07:35 PM

This is for those of you that want info on YOUR car after you take delivery. Or, any other GM vehicle you may own. Do not call about where's my car . This info has nothing to do with pre-delivery. NOTHING!!!!. Ok ... Got it? ok then here it is.

Have your vehicle info ready in front of you.

From the US : 905-644-4060 OR 905-644-3387 OR fax 905-644-5436.

In Canada toll free. 888-467-6853 or youn can use the 905#s

This info is 10 years old but it's all I've got.

:mad0 260:

Again ... This is for vehicles already in your posession not pre-ordered cars.

Don't yell at me if it's not up to date.

TJ91 · 04-03-2009, 07:37 PM

Quote:

Originally Posted by trm0002

Good question but we only saw the one car (unfortunately Hendriks) where the panels didn't appear to match. We didn't notice that on the CTF cars we saw nor the cars anyone saw at the shows around the nation. I rather doubt that it's a "standard" problem. I think we saw an isolated incident and read the worst into it.

alot of the ctf cars i saw in pucs and even the show cars i have seen had the same problem, but they were rushed cars, and thankfully its not a mold problem and so our fit will be just right, just the way i like it

Rockies4 · 04-03-2009, 07:39 PM

Hi Mole,

Have you seen any IBM 2 SS today or the last couple of days?

04-03-2009, 06:43 PM	#337
1989-ZR-1 Drives: 15 Corvettes, 2003 BMW 540I Join Date: Mar 2009 Location: Scottsdale, AZ Posts: 28	OK.... So your ignoring me... How about this one: Are there wheel locks on the wheels? __________________ Ordered IOM 2SS/RS AT on 11/07/2008 from: Calumet, Michigan

04-03-2009, 07:02 PM	#341
1989-ZR-1 Drives: 15 Corvettes, 2003 BMW 540I Join Date: Mar 2009 Location: Scottsdale, AZ Posts: 28	Did you see many Orange Camaros today? __________________ Ordered IOM 2SS/RS AT on 11/07/2008 from: Calumet, Michigan

04-03-2009, 07:07 PM	#343
1989-ZR-1 Drives: 15 Corvettes, 2003 BMW 540I Join Date: Mar 2009 Location: Scottsdale, AZ Posts: 28	That's good to know. How about the V6 ratio vs V8? 50/50? __________________ Ordered IOM 2SS/RS AT on 11/07/2008 from: Calumet, Michigan

04-03-2009, 07:16 PM	#345
2010 SS RS Drives: 2010 2SS/RS IBM Black Polished Join Date: Feb 2009 Location: Colorado Posts: 2,106	Any talk of second shift or Saturdays? Or even pulling more off the impala line? __________________ 418 Stroker, 621RWHP 648 lbs TORQUE Built by Laramie GM Auto Center Tuned by Nick at Mac Autosport. EForce SC, 2 3/4pulley,LPE dual fuel pump, JRE Twin fuel rail upgrade, posi clutch kit, RX oilcatch can and breather, Callies Compstar crankshaft and rods, Racing bearings, CP -13.8 race pistons, steel rings, Comp Cams X6 blower cam, Springs, HD timing chain and tensioner, Doug Thorley Tri Y LT headers, 89.7lb injectors, RPM rollbar, DSS1400 shafts, Simpson 5 pt harness, BMR Toe rods and trailing arms, led lights, RPM input and output shafts

04-03-2009, 07:20 PM	#346
Caliman93230 Drives: LS3S/C Join Date: Aug 2008 Location: CALI Posts: 1,344	Mr. mole are the panels matching now. or do they have the ugly gap still? I hope it now looks like the panels on the camaro web site nice and smooth. __________________ MODS whipple 2.9L s/c, ADM race scoop, 600 rwhp 550 wrtq, .

04-03-2009, 06:43 PM	#338
Arod Drives: 2010 Camaro 2SS RS Join Date: Mar 2009 Location: Odessa Tx Posts: 163 View My Garage	Mole, After the car is produced, how long does a quality control inspection typically take?

04-03-2009, 07:35 PM	#348
the Mole Retired but not done! Drives: '66 Impala '06 HHR '03 FJR1300 Join Date: Apr 2009 Location: Oshawa Posts: 400	contact info for Vintage cars. This is for those of you that want info on YOUR car after you take delivery. Or, any other GM vehicle you may own. Do not call about where's my car . This info has nothing to do with pre-delivery. NOTHING!!!!. Ok ... Got it? ok then here it is. Have your vehicle info ready in front of you. From the US : 905-644-4060 OR 905-644-3387 OR fax 905-644-5436. In Canada toll free. 888-467-6853 or youn can use the 905#s This info is 10 years old but it's all I've got. :mad0 260: Again ... This is for vehicles already in your posession not pre-ordered cars. Don't yell at me if it's not up to date. __________________ Disclaimer:Anything posted by me "the Mole" is my own opinions and thoughts , and don't necessarily represent the positions,strategies or opinions of GM. This is where I've ridden my bike.

04-03-2009, 07:39 PM	#350
Rockies4 Drives: PT Cruiser 02 Join Date: Jan 2009 Location: Santa Maria, California Posts: 791	Hi Mole, Have you seen any IBM 2 SS today or the last couple of days?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
News: Camaro to be built in Canada	Tran	5th Gen Camaro SS LS LT General Discussions	15	10-22-2009 08:16 AM
Workers in Oshawa, Ontario threaten strike against GM	camaro5	General Automotive + Other Cars Discussion	32	05-05-2009 11:40 PM
Mine will be 9th Camaro produced off the line!	Number_9	5th Gen Camaro SS LS LT General Discussions	172	04-20-2009 03:26 PM
google earth, Oshawa plant	zekefreak	5th Gen Camaro SS LS LT General Discussions	15	03-29-2009 01:05 PM
Anyone Work In The Auto Industry?	AirGoya	Off-topic Discussions	1	07-31-2007 07:36 PM