Official 1/4 Mile (V8) 2010+ Camaro Fast List

[CamaroGirl5]

Tires used on the pass: Stock (worn)
Performance Mods (if any): CAI, LT, Exhaust, Tune
Category submitted for: Bolt-ons, w/o Internal Engine Mods
R/T..........+.351
60'.............2.041
330'...........
660'...........8.263
660’ mph...88.95
1000'..........
1320'..........12.510
1320’ mph…114.75
Name of the track: Lapeer International Dragway
Date of pass: 9/25/2011
Weather conditions: (include Density Altitude, if known):

LS3, M6

Car #212 (Right side of slip!)

Owned and Driven by Samantha (Yes, a girl!)




@ 10:53 am the DA is 1357 time would convert to 12.327 @ 116.482

@ 11:53 am the DA is 1620 time would convert to 12.284 @ 116.905

[hot ss]

Originally Posted by Supercharged SS

No way it's 4200. My car with full tank of gas, full 5 gallon cell in the truck, the heavy maggie and a roll bar is 4170 with me in it and I still have everything in the car. Seats, trans and everything else. I doubt it weighs 4k lbs.

i weighed my car with me in it (187) @ 4224 lbs on a govt. scale.
mind you, i have a back seat, sub box, logging cables, etc, the maggie, and my heavy acs hood. that was with fuel reading a needlewidth above half tank.

i goto legals, with car as is, and i need fuel for 30 mile trip home plus safety.

p.s. i ran 11.79 Friday night, but im no longer near the bottom of the list for power adders.

[DandD]

Nice job Sam!!!!!!!!!

Dan

[Mikamaro]

Originally Posted by SGOS252382

Nice run, you'll need to beat 13.1 to make the top 30. You've got a nice trap speed of 109mph, but your 60' time shows you're spinning your tires big time. Work on that 60' time and you should have not trouble getting down in the low 13s.

Thank you. Good advice, will do probably this weekend.
This was my first time at a Drag race! What a rush...I like it.
You're right, for the first 2.55 sec I thought I was on a dirt track!! no traction at all...I did not use any aid from the computer for traction or stability control. I think I gave it to much rev of the line. Perhaps 3000rpm should do it? what do you suggest SG?

[rtcat600man]

Originally Posted by CamaroGirl5

Tires used on the pass: Stock (worn)
Performance Mods (if any): CAI, LT, Exhaust, Tune
Category submitted for: Bolt-ons, w/o Internal Engine Mods
R/T..........+.351
60'.............2.041
330'...........
660'...........8.263
660’ mph...88.95
1000'..........
1320'..........12.510
1320’ mph…114.75
Name of the track: Lapeer International Dragway
Date of pass: 9/25/2011
Weather conditions: (include Density Altitude, if known):

LS3, M6

Car #212 (Right side of slip!)

Owned and Driven by Samantha (Yes, a girl!)

AWESOME JOB SAM.............. Truly a spectacular job............. Glad some of us were there to see it happen......

I have added the DA info from your run.....

@ 10:53 am the DA is 1357 time would convert to 12.327 @ 116.482

@ 11:53 am the DA is 1620 time would convert to 12.284 @ 116.905

[skar]

Nice Sam .

[GQ4Life]

A girl that races & good too.. so hot.. some guy is super happy

[CamaroGirl5]

Haha, thank you guys! and Mike for the DA calculation! I am getting DR's (finally!) So I am going to set out to beat that time in a couple weeks!

[LS7 427]

Tires used on the pass: Nitto NT05R 315/35/20
Performance Mods: TVS2300, Cam, Heads, CAI, PTB, PI, LT, Exhaust, Gears, Tune, DR's, Suspension.
Category submitted for: Power Adders
L99 A6
R/T.......... 0.035
60'............. 1.65
330'........... 4.775
660'........... 7.305
660’ mph...99.14
1000'.......... 9.416
1320'.......... 11.31
1320’ mph… 124.69
Name of the track: Medicine Hat
Date of pass: September 24, 2011
Weather conditions: 91.4 F, DA 5036' (+2736')
DA corrected: 11.02 @ 127.98
.

[ParisTNDude]

Tires used on the pass: Stock Pirrelis
Performance Mods (if any): LT Headers, Cats, Axleback, VaraRam, Vmax Throttlebody, Tune
Category submitted for: Bolt On
R/T........... .206
60'............. 1.907
330'........... 5.316
660'........... 8.09
660’ mph... 88.63
1000'.......... 10.482
1320'.......... 12.498
1320’ mph… 111.54
Name of the track: Memphis International Raceway
Date of pass: 30 Sep, 2011
Weather conditions: 66 degrees, DA conversion: 821 12.394 @ 112.387 MPH

[Padre]

Originally Posted by ParisTNDude

Tires used on the pass: Stock Pirrelis
Performance Mods (if any): LT Headers, Cats, Axleback, VaraRam, Vmax Throttlebody, Tune
Category submitted for: Bolt On
R/T........... .206
60'............. 1.907
330'........... 5.316
660'........... 8.09
660’ mph... 88.63
1000'.......... 10.482
1320'.......... 12.498
1320’ mph… 111.54
Name of the track: Memphis International Raceway
Date of pass: 30 Sep, 2011
Weather conditions: 66 degrees, DA conversion: 821 12.394 @ 112.387 MPH

Nice run! Great with stock Pirellis! It's good to hear that the track in Memphis is up and running again.

Padre

[Padre]

SGOS, sorry to do this to you friend, but set a new PB.

1/4: 12.152 @ 113.69, 1.677 sixty
1/8: 7.784 @ 89.65

Place: Alabama International Dragway
Date: 9/30/2011, 9:45pm CT
DA: about 1300
Bolt-ons: Shorties, Exhaust, CAI, Converter, Tune, 18'' DRs, 3.45 gears, UDP, EWP



Link to build and discussion: http://www.camaro5.com/forums/showpo...&postcount=273



Padre

[1 BAD RS 2 SS]

new best of 3 passes . the car ran fsater every pass till the rain came
L99 dod delete , cam , 3200 stall , arh long tube headers , bluecat tune on 17" bogart wheels and drag radials , lpe duel pumps

left lane / car #61 10.946 et @ 124.846 mph 1/4 mile
7.047 et @99.608 mph 1/8 mile

[SGOS252382]

Originally Posted by Padre

SGOS, sorry to do this to you friend, but set a new PB.

1/4: 12.152 @ 113.69, 1.677 sixty
1/8: 7.784 @ 89.65

Place: Alabama International Dragway
Date: 9/30/2011, 9:45pm CT
DA: about 1300
Bolt-ons: Shorties, Exhaust, CAI, Converter, Tune, 18'' DRs, 3.45 gears, UDP, EWP

Attachment 292607

Link to build and discussion: http://www.camaro5.com/forums/showpo...&postcount=273



Padre

Nice run, I just had surgery yesterday on my ankle. I'm hoping it will heal up in a couple months. By then we should get some cooler air down her. I want to see what my car will do with the Converter. My issue will be getting the
20" DR's to hook.

Again, good run.