F/S: JBA Long Tube Headers + Hi Flow Cats - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

pyr0b0y · 10-14-2011, 11:52 AM

I'm selling my JBA long tube headers. The sizing is 1 7/8" and they have the ceramic coating as well. Retail on this setup is $850.

Price: $400+shipping

The 2010 Sin · 10-14-2011, 05:29 PM

Good deal on this! Best of luck! :-)

2010 4 DW · 10-14-2011, 06:59 PM

Quote:

Originally Posted by pyr0b0y

I'm selling my JBA long tube headers with the high flow catted mid pipes. The sizing is 1 7/8" and they have the silver coating as well. Retail on this setup is $1450.

Price: $800+shipping

Did you go with larger tubes?

pyr0b0y · 10-14-2011, 07:00 PM

Quote:

Originally Posted by 2010 4 DW

Did you go with larger tubes?

switching to turbos and long tubes dont fit.

TrojanRay2418 · 10-15-2011, 12:16 AM

will you sell the cats separate?

Revo1 · 10-15-2011, 01:20 AM

Hey Josh I'm not sure, but you might be able to interest Ryan in the headers... Will the cats fit my XS Power setup you think?

Ronin_2SS · 10-15-2011, 02:18 PM

Damn if i wasnt stressin about my clutch issue id be all over this! didnt you have cut outs as well josh? idk if they will ben the JBA ones are made to fit their headers specifically. well ill keep eyes on this.

pyr0b0y · 10-16-2011, 01:10 PM

first post updated. Just selling the long tube headers; no cats anymore; price is $550 for 1 7/8" headers.

ben the cats were 3", most of the catbacks go down to 2.5" right before the cats.....

Revo1 · 10-16-2011, 03:32 PM

Quote:

Originally Posted by pyr0b0y

first post updated. Just selling the long tube headers; no cats anymore; price is $550 for 1 7/8" headers.

ben the cats were 3", most of the catbacks go down to 2.5" right before the cats.....

DOH! Mine's 3"!

IAG, just casually keeping an eye out for a set- tired of fire engines following me around looking for the fire.

sschevybear11 · 10-16-2011, 06:25 PM

Pics. These have special connection points to the cats don't they? Is so this kind of sucks having to buy these and then purchase new cats.

pyr0b0y · 10-17-2011, 03:04 PM

Quote:

Originally Posted by sschevybear11

Pics. These have special connection points to the cats don't they? Is so this kind of sucks having to buy these and then purchase new cats.

I'll double check tonight when I stop by the shop, but I believe these will connect to the stop cats fine.

sschevybear11 · 10-17-2011, 03:24 PM

Looked at your build thread and they use a band clamp and have special ends, damn. Does the collector have room to cut off and ad 3" sections?

Ronin_2SS · 10-17-2011, 03:30 PM

Quote:

Originally Posted by sschevybear11

Pics. These have special connection points to the cats don't they? Is so this kind of sucks having to buy these and then purchase new cats.

JBA uses V band connections from their LT's to their cats. im pretty sure this is what Josh has

http://jbaheaders.com/feature_pages/2010Camaro.asp

as far as i know the only thing that JBA has that can to bolt up to factory cats is their shorty headers.

pyr0b0y · 10-17-2011, 03:35 PM

Quote:

Originally Posted by sschevybear11

Looked at your build thread and they use a band clamp and have special ends, damn. Does the collector have room to cut off and ad 3" sections?

I'll ask tonight. Everything is at Blu808, you can give them a call and they can give you more details then I would be able to.

408-376-0560

10-14-2011, 11:52 AM	#1
pyr0b0y need....more....hp Drives: The Neighbor Hater Join Date: Dec 2010 Location: San Mateo, CA Posts: 4,091	F/S: JBA Long Tube Headers + Hi Flow Cats I'm selling my JBA long tube headers. The sizing is 1 7/8" and they have the ceramic coating as well. Retail on this setup is $850. Price: $400+shipping __________________ BUILD THREAD BUILT AND MAINTAINED BY BLU808 Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims Last edited by pyr0b0y; 11-07-2012 at 12:10 AM.

10-14-2011, 05:29 PM	#2
The 2010 Sin Dont H8 Me Cuz U Aint Me Drives: 2016 SS Sedan, 2017 Explorer Sport Join Date: Feb 2010 Location: Tulsa, Oklahoma Posts: 2,910	Good deal on this! Best of luck! :-) __________________

10-15-2011, 01:20 AM	#6
Revo1 Don't Like it? Suggit. Drives: 2010 2SS/RS Join Date: Aug 2008 Location: Fresno, CA Posts: 14,832 View My Garage	Hey Josh I'm not sure, but you might be able to interest Ryan in the headers... Will the cats fit my XS Power setup you think? __________________ "Tops off, tach up baby- loud and proud!" A Camaro lover from day one- 1996 3.8 V6 Camaro, to 1996 5.7 LT1 Camaro Z28, to the sold 2002 5.7 LS1 Camaro SS, and NOW, a [I]6.2 L99 VR 2SS/RS: XS Power stainless full exhaust, Airaid CAI, BMR drop springs and sways, custom tune by Cal Speed- 411rwhp

10-15-2011, 02:18 PM	#7
Ronin_2SS Loving My LS3 Drives: 2010 Summit white 2SS Join Date: Jul 2009 Location: Modesto CA Posts: 828 View My Garage	Damn if i wasnt stressin about my clutch issue id be all over this! didnt you have cut outs as well josh? idk if they will ben the JBA ones are made to fit their headers specifically. well ill keep eyes on this. __________________

10-16-2011, 01:10 PM	#8
pyr0b0y need....more....hp Drives: The Neighbor Hater Join Date: Dec 2010 Location: San Mateo, CA Posts: 4,091	first post updated. Just selling the long tube headers; no cats anymore; price is $550 for 1 7/8" headers. ben the cats were 3", most of the catbacks go down to 2.5" right before the cats..... __________________ BUILD THREAD BUILT AND MAINTAINED BY BLU808 Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims

10-15-2011, 12:16 AM	#5
TrojanRay2418 Drives: 2010 2ss/rs Join Date: Aug 2011 Location: sylmar ca Posts: 109	will you sell the cats separate?

10-16-2011, 06:25 PM	#10
sschevybear11 Drives: 2011 Black 1SS Join Date: Jun 2011 Location: moline,il Posts: 504 View My Garage	Pics. These have special connection points to the cats don't they? Is so this kind of sucks having to buy these and then purchase new cats. __________________ 2011 Black 1SS M6 12.75@110.91 bone stock Now: Coated Dynatech LT's/!Cats/Hurst Shifter/Roto-fab/SLP SS badges/JRE 415HP Tune, Scoop & Washer Relocation Bottle,Hurst Stunner 20X9 Wheels, Moroso Catch Can, ASP pulley, Magnaflow X-pipe, GTO remote clutch reservoir 1989 Silver 5.0 Mustang LX Coupe 1999 Pewter Tahoe LT 2011 Blue Camry SE

10-17-2011, 03:24 PM	#12
sschevybear11 Drives: 2011 Black 1SS Join Date: Jun 2011 Location: moline,il Posts: 504 View My Garage	Looked at your build thread and they use a band clamp and have special ends, damn. Does the collector have room to cut off and ad 3" sections? __________________ 2011 Black 1SS M6 12.75@110.91 bone stock Now: Coated Dynatech LT's/!Cats/Hurst Shifter/Roto-fab/SLP SS badges/JRE 415HP Tune, Scoop & Washer Relocation Bottle,Hurst Stunner 20X9 Wheels, Moroso Catch Can, ASP pulley, Magnaflow X-pipe, GTO remote clutch reservoir 1989 Silver 5.0 Mustang LX Coupe 1999 Pewter Tahoe LT 2011 Blue Camry SE

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTS: JBA 1 7/8 Headers with Hi Flow Cats ($1100)	Mindz	Local Marketplace	5	02-10-2011 03:02 PM
JBA Performance Headers \| Mid-Pipes \| Exhausts \| V6/V8 \| FREE S&H!!!	AJ@ECSMotorsports	V8 Bolt-Ons & Tunes	100	11-13-2010 04:51 PM
High Flow Cats with Shorty Headers?	Aaron1121	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	14	07-06-2010 02:56 AM
jba long tube headers and full flow cats	desiel	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	10	06-11-2010 12:18 AM
Modern Muscle Exhaust and Intake Special	modern-muscle	V8 Bolt-Ons & Tunes	1	01-20-2010 07:46 PM