JANNETTY RACING V8 CAI TEST PART 2 RESULTS - Page 17 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

JANNETTYRACING · 10-20-2011, 07:07 AM

Quote:

Originally Posted by Moody'sSS

are the peak and average hp #'s for the injen true air right..avg @ 9.6 and peak @ 8..

Correct.

Moody'sSS · 10-20-2011, 11:16 AM

thanks...

Ratt · 10-23-2011, 12:49 AM

Sticky, Sticky, Sticky

Blitz · 10-23-2011, 01:02 PM

Glad I went with C.A.I.

Ratt · 10-29-2011, 06:04 AM

Bump

EricSS · 11-05-2011, 12:36 AM

Quote:

Originally Posted by Ratt

Sticky, Sticky, Sticky

I bet the only reason this hasn't been stickied already is because some of the site sponsors aren't happy with the results...

Ratt · 11-05-2011, 12:53 AM

Quote:

Originally Posted by EricSS

I bet the only reason this hasn't been stickied already is because some of the site sponsors aren't happy with the results...

There are only 3 intakes at the top. I think they are afraid to lose sponsors who sell the bottom of the list. Can’t blame them for that, this forum has to pay bill's like everyone else

JANNETTYRACING · 11-05-2011, 07:48 AM

Every Manufacturer, site sponsor, or not, has the same opportunity to take what we learned from the test and use it to they're advantage and improve the kits that were weak.

I discussed the Weak links with all of the the Manufacturers, Some took what we learned and improved they're kits, others took the approach, Not my child must be something wrong with the test.

At the time I did the testing I didn't sell a single cold air kit, The Claims from the Makers were Wild and all over the Place.

I needed Answers and so did the Community.

I did the Test to Find out Once and For ALL How Each Kit Performed, Installed, Looked, Fit, and overall engineering that went in to it.

And So I can Make Real Educated Recommendations to my customers.

I didn't do it for the Money Either, Regardless of Manufacturer I make the Same lousy mark up, I did it for what is best for my customers.

I invested Thousands of Dollars of my own money, countless hour preparing and running my own equipment to get those answers.

With 30 years experience running Dynos I know how to do Proper Testing.

Like any contest there will be a Clear Winner, and those who lost either step up for the next Contest or Complain and make excuses, that's Life.

Sticky or Not this is The best info available bar none.

Ted.

Brianskeet · 11-05-2011, 10:40 AM

And that pretty much says it all.

JoshBobGuptaMarley · 11-05-2011, 10:51 AM

I will say that I felt a huge increase in all angles of performance and sound when I installed the CAI intake with the scoop. People who ride with me are taken back buy the night and day difference. Its really great that you did this, thanks for your hard work!

Ratt · 11-16-2011, 04:23 PM

Bump

380rwhp so far at the dyno shop and a few more hp's still to come, hopefully.

MRGOODWRENCH3 · 11-16-2011, 07:08 PM

Quote:

Originally Posted by ArkySS

Anybody have a picture of this legendary scoop?

Yuuuuup! Here you go.

The ADM Race Scoop and Race Intake work great. The fit, finish and look is second to none.

MRGOODWRENCH3 · 11-16-2011, 07:12 PM

And Big Thanks again to Ted for all his hard work!

JANNETTYRACING · 11-17-2011, 08:07 AM

Quote:

Originally Posted by MRGOODWRENCH3

And Big Thanks again to Ted for all his hard work!

Ted and the Crew that made this happen appreciate the support.

10-20-2011, 11:16 AM	#226
Moody'sSS Drives: IOM 2SS 2010 Join Date: Mar 2010 Location: North Carolina Posts: 289 View My Garage	thanks... __________________ OBX headers/Flowmaster AT exhaust/C.A.I. intake/ADM race scoop/RX catchcan/Black replica wheels/Vmax throttle body/JRE tune

10-23-2011, 01:02 PM	#228
Blitz Drives: 2012 CTS-V Sedan Join Date: Feb 2011 Location: Charlotte, NC Posts: 738	Glad I went with C.A.I. __________________

11-05-2011, 07:48 AM	#232
JANNETTYRACING Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009 Location: ON THE DYNO WATERBURY CT. Posts: 15,440	Every Manufacturer, site sponsor, or not, has the same opportunity to take what we learned from the test and use it to they're advantage and improve the kits that were weak. I discussed the Weak links with all of the the Manufacturers, Some took what we learned and improved they're kits, others took the approach, Not my child must be something wrong with the test. At the time I did the testing I didn't sell a single cold air kit, The Claims from the Makers were Wild and all over the Place. I needed Answers and so did the Community. I did the Test to Find out Once and For ALL How Each Kit Performed, Installed, Looked, Fit, and overall engineering that went in to it. And So I can Make Real Educated Recommendations to my customers. I didn't do it for the Money Either, Regardless of Manufacturer I make the Same lousy mark up, I did it for what is best for my customers. I invested Thousands of Dollars of my own money, countless hour preparing and running my own equipment to get those answers. With 30 years experience running Dynos I know how to do Proper Testing. Like any contest there will be a Clear Winner, and those who lost either step up for the next Contest or Complain and make excuses, that's Life. Sticky or Not this is The best info available bar none. Ted. __________________ www.jannettyracing.com Celebrating 39 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com Last edited by JANNETTYRACING; 11-05-2011 at 11:02 AM.

11-05-2011, 10:40 AM	#233
Brianskeet Brianskeet Drives: RJTC 1SS RS L99 Join Date: Sep 2010 Location: Crestview FL Posts: 771 View My Garage	And that pretty much says it all. __________________ ARH 1 7/8 coated LT, High flows, Corsa L99 exhaust, Vmax CNC throttle body, Elite Engineering catch can and tunnel brace, C.A.I. Apex Washer relocation and scoop, Janetty Tune, MSD wires, DEI heat shields, RB rotors and pads, Mike the powder coater calipers, pedders lines, Forgestar F14's, Gorilla nutz, MTI spoiler finished by Gary, Gary's Customz Bow Ties, Side Markers and Tails tinted, Bezels matte black, Badges deleted, Windows Tinted, AAC DRL P13W lights, AAC tinted LED reverse lights, AAC LED interior lights, RPI match painted DRL Bezels, Lis plate frame, Lloyds mats

11-05-2011, 10:51 AM	#234
JoshBobGuptaMarley Emerald Coast Camaros Drives: '12 2SS/RS LS3 GBA Join Date: Sep 2011 Location: PanamaCityBeach,Florida Posts: 1,375 View My Garage	I will say that I felt a huge increase in all angles of performance and sound when I installed the CAI intake with the scoop. People who ride with me are taken back buy the night and day difference. Its really great that you did this, thanks for your hard work! __________________ Muffler Delete, Cold Air Inductions intake, Technostalgia Sequential LED Tail Lights, Vmax CNC Ported TB, RX Catch Can, AAC LED Interior Lights (Aqua)

10-23-2011, 12:49 AM	#227
Ratt Account Suspended Drives: 2ss Join Date: Sep 2011 Location: Illinois Posts: 199	Sticky, Sticky, Sticky

10-29-2011, 06:04 AM	#229
Ratt Account Suspended Drives: 2ss Join Date: Sep 2011 Location: Illinois Posts: 199	Bump

11-16-2011, 04:23 PM	#235
Ratt Account Suspended Drives: 2ss Join Date: Sep 2011 Location: Illinois Posts: 199	Bump 380rwhp so far at the dyno shop and a few more hp's still to come, hopefully.

11-16-2011, 07:12 PM	#237
MRGOODWRENCH3 Account Suspended Drives: 2010 Camaro 2SS/RS Join Date: Feb 2011 Location: Park City, Utah Posts: 670 View My Garage	And Big Thanks again to Ted for all his hard work!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Got car back from Jannetty Racing Dyno results inside	GQ4Life	Forced Induction - V8	26	06-13-2010 04:51 PM
Coolingmist welcomes Jannetty Racing !!	coolingmist	Forced Induction - V8	25	05-13-2010 06:36 PM
Cold Air Inductions Intake and Jannetty Racing	Chief Bob	Vendor and Seller review / feedback / experiences	5	04-23-2010 02:45 PM
Pedders Suspension Benchmark Track Testing and New Jersey Track Day	Info@PeddersUSA.com	USA - NY / NJ / PA	35	10-26-2009 05:20 PM
Tom Henry Racing Announces a Special Edition 2010 Camaro!	TAG UR IT	5th Gen Camaro SS LS LT General Discussions	72	04-30-2009 12:57 PM