!!!OFFICIAL!!! SoCal Head Turners thread

[bajamoon]

Originally Posted by TCAT

Well Stefania, I got mine from BestWheelDeals, who is a vendor of Camaro5. Those wheels will look good on your ride man.

I looked at them but they wante I think 330 a wheel. Thanks Tanesha

[TCAT]

Originally Posted by bajamoon

I looked at them but they wante I think 330 a wheel. Thanks Tanesha

You're welcome Pavarotti.

That seems a bit more expensive than it should be. Stick witht the person that quoted you less, and that's some good savings and hopefully they're reputable.

[BROMARO909]

Originally Posted by bumblebabe

Just sent a PM Was waiting on my friend to send me over his number - as if I couldn't look it up - but figured a PM would work too Thanks! I hear nothing but good things about them

OH... and man, I left my house today just around 7 and didn't see you on the road! I even took Kanan instead of Lindero in the hopes I'd catch a glimpse and I was sadly disappointed! :(

Oh damnn sorry about that I took T.O instead haha ill try and take kanan tomorrow at around 6:50-7

[BiG_TiMe]

aight so i finally got my car back after 2 long weeks
i upgraded a few parts: replaced factory halogen w/ eagle eyes; put in new fogs; got the SS bumper; and replaced the passenger fender

Before:


After:

[Chito]

Originally Posted by bumblebabe

So any of y'all who might have worked with Haddad before... Any ideas on what kinds of pricing and turn around time he'd charge/take to remove my exhaust and replace it with the American Thunder Flowmaster I'm planning to get? I'm hoping I can order and get it done by super car sunday so my car doesn't sound so much like a wet ***** and sounds like the real beastly V8 it is

Haddad does excellent work and a good guy to deal with. I had work done there and I'm going back soon to get the suspension done at his shop. here's his number to his shop (310) 412-8032. hope that helps.

[Chito]

Originally Posted by Inferno LS3

Just talked to Hamilton over there wondering when my new Pfadt coilovers are gonna arrive. Haddad is one of those shops you feel good about working on your car. I'm one of those people, when I find I place I like I'll always go there. Mike is really down to earth and won't BS you. He has talked me out of buying lots of things he says I don't need. He does it all except paint and body work. They also do detailing there too.

Did the parts arrive? I order some parts from pfadt as well so just wondering?

[ChvyBoss]

Haddad is the man!!!! Highly recommended. He'll hook you up especially if he knows your HT

[TCAT]

Originally Posted by BiG_TiMe

aight so i finally got my car back after 2 long weeks
i upgraded a few parts: replaced factory halogen w/ eagle eyes; put in new fogs; got the SS bumper; and replaced the passenger fender

Before:


After:

Looks fantastic man! Eagle eyes are one of my next mods. So, with the Eagle eye headlights, it doesn NOT come with the HID lights in the center. Now I could care less about the HID's to be honest, and it will be a pain in the butt and expensive to buy everything needed for it. So, can I just replace the yellowish looking pale lights in the eagle eye headlight with these bulbs from AAC? (The Oracle H13 H.O.D): http://www.automotivelightstore.com/H13HOD.aspx

[bumblebabe]

Originally Posted by bajamoon

So I'm going to be the only douche with stock exhaust. I'm not going.

Hahaha, Well don't worry. After chatting with Mike Haddad today, I'm looking at some other exhausts than what I was initially gonna go with. SO in the mean time I'm probably going with a muffler delete just for a temporary sound boost. I'll be doing the exhaust a bit later after I hear some more up close and personal.

Originally Posted by ChvyBoss

Haddad is the man!!!! Highly recommended. He'll hook you up especially if he knows your HT

Originally Posted by Chito

Haddad does excellent work and a good guy to deal with. I had work done there and I'm going back soon to get the suspension done at his shop. here's his number to his shop (310) 412-8032. hope that helps.

Originally Posted by Inferno LS3

Just talked to Hamilton over there wondering when my new Pfadt coilovers are gonna arrive. Haddad is one of those shops you feel good about working on your car. I'm one of those people, when I find I place I like I'll always go there. Mike is really down to earth and won't BS you. He has talked me out of buying lots of things he says I don't need. He does it all except paint and body work. They also do detailing there too.

I gave him a call earlier today, and he is most definitely the man You guys aren't the only ones recommending him, so I feel pretty happy with taking my business there already. He and I chatted for a while and it's nice to know that someone has a similar thought process and wants to get it right. SO... once I hear some more exhausts and decide my overall plan for the car

[bumblebabe]

Originally Posted by BROMARO909

Oh damnn sorry about that I took T.O instead haha ill try and take kanan tomorrow at around 6:50-7

LOL no worries! I could use a coffee. Wanna meet at the Starbucks on Kanan so I can see your ride and get my coffee at the same time?? wink wink nudge nudge

[bumblebabe]

Originally Posted by BiG_TiMe

aight so i finally got my car back after 2 long weeks

SUHWEEEEEEEEET!!!

[MARINE1991]

Does anyone know how to take off the over head counsol??? need to send it out to get hydro painted.... need more wood in the car..

[bajamoon]

Originally Posted by MARINE1991

Does anyone know how to take off the over head counsol??? need to send it out to get hydro painted.... need more wood in the car..

It's a pain that's all I can tell ya. Took mine out last week. Clips around the outside and two screws about the grey dome light housing. I ended up taking out the grey light housing then it was cake, but a bitch to figure that out.

You going to hydro dip wood?

Well yours might not have the screws inside since yours is older. I read that it's all just clips but mine had screws too.

[MARINE1991]

Originally Posted by bajamoon

It's a pain that's all I can tell ya. Took mine out last week. Clips around the outside and two screws about the grey dome light housing. I ended up taking out the grey light housing then it was cake, but a bitch to figure that out.

You going to hydro dip wood?

Yea...