EPDM (brake fluid rated) Clutch reservior line source needed - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Blue70SS · 10-19-2011, 11:30 PM

Does anyone know of a source for purchasing the "EPDM" type clutch fluid line for between the Clutch Master Cylinder and the separate reservior? Looking to buy 4' of it... more if needed for minimum sale (can always sell remainder to a local club member in need)

I've been checking all over and keep getting nowhere. Looks like we need 1/4" inside diameter hose? Already did reservior install long ago.... just changing to the correct one that holds up to brake fluid.

Any help would be appreciated..... last component I need.

Redoing tranny

, but problem points to hydrolic system. Problem reared it's head after changing tranny fluid to "Be Safe". I found it that it's not uncommon for a mild tranny problem to get much worse with new fluid.
Theory is the dirty fluid was slowing down the syncros, hence making up for syncro wear. And the new fluid has fresh detergents. Clutch appears perfect without removing - not a hint of clutch dust. So anyway, now I'm replacing all hydrolics even if they look good - much cheaper than high performance transmissions and clutches.
NEW Slave cylinder, master cylinder, Tick Performance clutch stainless steel clutch line and 4' bleeder line for a 100% bleed system. $$$ extra, better than $$$$ repeat

TC · 10-20-2011, 06:58 AM

Try your local semi truck parts store, that's where I ended up getting mine.

flht99b · 10-20-2011, 07:31 AM

Sent you a PM. BMW part number 21521163714 which comes in a 38" length. If you need 4' of it you need to have the BMW parts guy order quantity of 2, hose will then come in a 76" length.
Ed M.

Blue70SS · 10-20-2011, 10:55 AM

Quote:

Originally Posted by flht99b

Sent you a PM. BMW part number 21521163714 which comes in a 38" length. If you need 4' of it you need to have the BMW parts guy order quantity of 2, hose will then come in a 76" length.
Ed M.

Thanks!

10-19-2011, 11:30 PM	#1
Blue70SS Drives: 10 LS3 2SSRS IOM,21 ZLE Wild Cherry Join Date: Aug 2009 Location: Denver Posts: 2,126	EPDM (brake fluid rated) Clutch reservior line source needed Does anyone know of a source for purchasing the "EPDM" type clutch fluid line for between the Clutch Master Cylinder and the separate reservior? Looking to buy 4' of it... more if needed for minimum sale (can always sell remainder to a local club member in need) I've been checking all over and keep getting nowhere. Looks like we need 1/4" inside diameter hose? Already did reservior install long ago.... just changing to the correct one that holds up to brake fluid. Any help would be appreciated..... last component I need. Redoing tranny , but problem points to hydrolic system. Problem reared it's head after changing tranny fluid to "Be Safe". I found it that it's not uncommon for a mild tranny problem to get much worse with new fluid. Theory is the dirty fluid was slowing down the syncros, hence making up for syncro wear. And the new fluid has fresh detergents. Clutch appears perfect without removing - not a hint of clutch dust. So anyway, now I'm replacing all hydrolics even if they look good - much cheaper than high performance transmissions and clutches. NEW Slave cylinder, master cylinder, Tick Performance clutch stainless steel clutch line and 4' bleeder line for a 100% bleed system. $$$ extra, better than $$$$ repeat __________________ LPE 650+,IOM Pearl White Rallys 860 RWHP 924 RWTQ,TVS2300 10/14 OD 2.75/NW 102mm,RDS/FLOWED "109" SHOT/LPE NCC NLP spoiler/GM splitter/Torq HE-fans/oil coolers/IC1000cc Squash twins,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit LPE Brotherhood . Last edited by Blue70SS; 10-19-2011 at 11:48 PM.

10-20-2011, 07:31 AM	#3
flht99b Drives: 2010 Camaro 2SS/RS RJT Join Date: May 2009 Location: Knoxville Posts: 1,574 View My Garage	Sent you a PM. BMW part number 21521163714 which comes in a 38" length. If you need 4' of it you need to have the BMW parts guy order quantity of 2, hose will then come in a 76" length. Ed M. __________________ RJT 2SS/RS, AAM 3.70's, MTI Sway Bars, Shifter & SS brake lines, ZLI calipers, rotors & pads, BMR Trailing & Toe Arms, rear cradle & diff bushes, Pedders XA's, Camber/Toe eccentrics, Radius arm inserts, GTO clutch reservoir, LS9 cam, Comp valve springs, Melling 10296 oil pump, CR5 timing chain, LS6 damper, CAI Cold Air Intake, ARH LT headers w/HF cats, GMPP touring axle back, Elite Engineering Catch Can, Forgeline 20x9.5 & 20x11 DS3 whls, 275/40/20 & 315/35/20 tires, 2011 Convertible spoiler, 1LE front spoiler, Lloyd "SS" Floor Mats, GM Camaro Trunk Mat, wrapped console & Grant steering wheel.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Sticking clutch pedal issues - Tick Performance feels your pain!	Matt@Tick	V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)	185	12-22-2018 12:21 PM
I want a new clutch, you too????? Sign here	tjbusa	V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)	370	08-10-2013 03:27 AM
ZR1 TWIN DISC CLUTCH KIT or Mcloed RXT twin disc clutch	qtr-camaro ss	V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)	10	06-07-2011 10:46 PM
What exactly burns the clutch on an m6?	DarkneSS	5th Gen Camaro SS LS LT General Discussions	49	04-15-2011 10:55 AM
Camaro 2010 Issues	Tim's.2010.Camaro.SS	Camaro Issues / Problems \| Warranty Discussions \| TSB and Recalls	57	06-04-2010 09:27 AM

10-20-2011, 06:58 AM	#2
TC Drives: 2010 VR 2SS-RS Join Date: Dec 2008 Location: Michigan Posts: 367 View My Garage	Try your local semi truck parts store, that's where I ended up getting mine.