![]() |
|
|
#43 |
|
Account Suspended
Drives: 2ss Join Date: Sep 2011
Location: Illinois
Posts: 199
|
I agree, I went with CAI because of the insulated box. The closed box system does the best job of avoiding hot air from the engine compartment and will draw some cold air from the ground if you remove the OEM washer bottle.
If Halltech would put a lid on his I think he would be king of the hill. I’m just grateful that Jannetty did his research that allowed me to buy an aftermarket intake that actually improves HP. |
|
|
|
|
|
#44 | |
|
Account Suspended
Drives: 2ss Join Date: Sep 2011
Location: Illinois
Posts: 199
|
Quote:
I drove the car around for an hour or more then I popped the hood and with a laser temp gun took the temp of the outside of the CAI tube, it was 137 F. I pulled the CAI tube off at the throttle body and pointed the laser at the inside towards the bend and it was 137 F. There is no difference between the outside of the coated tube and the inside. I have pictures if anybody wants me to post them but it is what it is sorry. I going to wrap the tube with pipe insulation and check the inside of the tube in the next day or so, I will post the results. |
|
|
|
|
|
|
#45 |
|
SoCal HT5
|
I have the CAI with the ADM scoop and I'm very happy with it. I also bought the rotofab washer relocation kit, but I have the hotckis strut brace and the rotofab washer kit doesn't fit, so just be careful and keep that on mind. I went with the apex washer kit and it works just fine.
__________________
|
|
|
|
|
|
#46 | |
![]() Drives: 2010 Camaro 2SS LS3 M6 Join Date: Oct 2011
Location: Dallas, TX
Posts: 159
|
Quote:
__________________
__________________________
2010 2SS LS3 M6 Inferno Orange Metallic / Black |
|
|
|
|
|
|
#47 |
|
CamaroFans.com
|
ADM FTW... absolutely the best fit and finish out there.
|
|
|
|
|
|
#48 |
|
OFF THE CHAIN
|
Couldnt be any happier with my CAI, i ordered from those awesome guys over at Maryland Speed! Super fast delivery!
|
|
|
|
|
|
#49 |
|
OFF THE CHAIN
|
CAI Hands down, couldn't be any happier with them or Maryland Speed who i ordered mine through!
|
|
|
|
|
|
#50 |
![]() Drives: 2011 Camaro 2SS 6M Join Date: Oct 2011
Location: Clinton, MO
Posts: 121
|
Is there any major difrence between the ADM and CAI intake? Matareial, cost, Filter, our both tubes heat coated on the inside etc?
Thanks, Greg
__________________
2011 Camaro 2SS-VR-White Stripes-6M-RS-Sunroof-Rear Decklid Wing-Polished Wheels-Premium Mats- Mods-Corsa Cat-Back-Next LT's-Hi Flow Cats-Cam-CAI-Custom Tune
Order Date 5/27/11-Invoice Date 6/30/2011- Delivered to Dealer 7/20/2011- I Purchased 10/14/2011 Last edited by superchargemyride; 11-08-2011 at 01:47 PM. |
|
|
|
|
|
#51 | |
|
Account Suspended
Drives: 2ss Join Date: Sep 2011
Location: Illinois
Posts: 199
|
Quote:
CAI insulates the inside of their box and it makes a BIG difference. They both use coated aluminum tubes that get hot when you drive them. I just put pipe insulation on the outside of my coated aluminum tube and could tell a difference when I was driving home. I will pull the tube off and take a temp reading tonight when I get to work and post it. The insulation CAI uses on the inside of their box keeps all the heat from the engine compartment from coming through. I havent taken a temp reading but you can put your hand on it and it feels cool after driving for an hour. |
|
|
|
|
|
|
#52 |
|
SoCal HT5
|
sorry for the delay, but here you go. the apex washer is just behind the air box.
__________________
|
|
|
|
|
|
#53 | |
![]() Drives: 2011 Camaro 2SS 6M Join Date: Oct 2011
Location: Clinton, MO
Posts: 121
|
Quote:
__________________
2011 Camaro 2SS-VR-White Stripes-6M-RS-Sunroof-Rear Decklid Wing-Polished Wheels-Premium Mats- Mods-Corsa Cat-Back-Next LT's-Hi Flow Cats-Cam-CAI-Custom Tune
Order Date 5/27/11-Invoice Date 6/30/2011- Delivered to Dealer 7/20/2011- I Purchased 10/14/2011 Last edited by superchargemyride; 11-08-2011 at 07:42 PM. |
|
|
|
|
|
|
#54 |
![]() Drives: 2011 Camaro 2SS 6M Join Date: Oct 2011
Location: Clinton, MO
Posts: 121
|
Very nice looking Engine bay. Looks like you have the hh relocate kit and does that carbon fiber slip over the Intake? I know you have a lot more under the hood than that but was curious on the carbon fiber intake and if was just a cover?
__________________
2011 Camaro 2SS-VR-White Stripes-6M-RS-Sunroof-Rear Decklid Wing-Polished Wheels-Premium Mats- Mods-Corsa Cat-Back-Next LT's-Hi Flow Cats-Cam-CAI-Custom Tune
Order Date 5/27/11-Invoice Date 6/30/2011- Delivered to Dealer 7/20/2011- I Purchased 10/14/2011 |
|
|
|
|
|
#55 | |
|
Emerald Coast Camaros
Drives: '12 2SS/RS LS3 GBA Join Date: Sep 2011
Location: PanamaCityBeach,Florida
Posts: 1,375
|
Quote:
__________________
Muffler Delete, Cold Air Inductions intake, Technostalgia Sequential LED Tail Lights, Vmax CNC Ported TB, RX Catch Can, AAC LED Interior Lights (Aqua) |
|
|
|
|
|
|
#56 | |
![]() Drives: 2011 Camaro 2SS 6M Join Date: Oct 2011
Location: Clinton, MO
Posts: 121
|
Quote:
__________________
2011 Camaro 2SS-VR-White Stripes-6M-RS-Sunroof-Rear Decklid Wing-Polished Wheels-Premium Mats- Mods-Corsa Cat-Back-Next LT's-Hi Flow Cats-Cam-CAI-Custom Tune
Order Date 5/27/11-Invoice Date 6/30/2011- Delivered to Dealer 7/20/2011- I Purchased 10/14/2011 |
|
|
|
|
|
|
|
|
![]() |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Official 1/4 Mile (V8) 2010+ Camaro Fast List | Merc | Dragstrip and Launch Techniques Discussion | 3656 | 11-01-2025 02:41 PM |
| ADM CAI and Race Scoop @ 2 EDGE PERFORMANCE | MRGOODWRENCH3 | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 5 | 09-05-2011 12:35 PM |
| ADM CAI or HENNESSY CAI? | ChvyBoss | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 7 | 01-19-2011 07:28 AM |
| New product, DSV Carbon Fiber ADM CAI intake lid | Indpowr | Interior Parts & Accessories | 0 | 09-05-2010 07:27 PM |
| LS3 goes 11`s Bonestock! | GMRULZ | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 28 | 12-08-2008 10:10 PM |